Table of Contents
Stock base cabinets are generally 24 inches deep (not counting countertop overhang). Deeper base cabinets make it difficult for you to reach the back of the counter or to plug-in appliances.
What is the standard depth for kitchen cabinets?
Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.
Can kitchen cabinets be 30 inches deep?
Kitchen Base Cabinets Base cabinets are often 24 inches deep. In some cases, base cabinets may be up to 30 inches deep, but this can make it a bit difficult to reach the back of the countertop or the wall outlet above the counter.
How deep are kitchen cabinets UK?
Kitchen cabinets are usually 60 cm deep and have widths that are multiples of 10 cm or 15 cm. This sizing is illustrated by the base units shown below. Drawer units are usually offered in a variety of widths. Larder units are usually 30 cm wide and appliance units 60 cm wide.
How deep are kitchen cabinets Australia?
The standard floor cabinet depth is 580mm inclusive of door thickness. Standard dimensions for stock or DIY base (floor) cabinets are 720mm high by 560mm deep (without the door).
How deep are kitchen cabinets lower?
Depth: The depth of base cabinets without the countertop typically measures 24 inches. Adding the countertop will create an overhang between one to two inches.
Does cabinet depth include doors?
General Sizing Specifications These depths are from the back of the cabinet to the front of the face frame and do not include the thickness of the door and drawer front.
How deep are shallow kitchen cabinets?
The shallowest base cabinets are 12 inches deep (Usually, a wall cabinet is used to achieve this depth). The width can range from nine inches wide to 36 inches wide.
Can cabinets be deeper than 24 inches?
Lower cabinets in the kitchen come at a standard depth of 24 inches. Yes, this conforms with the necessary depth for appliances and sinks. There’s also a certain logic to having established industry standards. Deeper base kitchen cabinets, however, create more design possibilities than you might think.
Do they make 36 inch deep cabinets?
In general, base cabinets’ depth can go from 16 inches to 36 inches and 34.5 to 36 inches in height. This allows plenty of storage from the spacious pots and pans to the small items like fork and spoon inside the drawers.
How deep are kitchen cabinet drawers?
The standard depth is 12 inches, but you can find other sizes, from 15 to 36 inches.
How deep are overhead cupboards?
Overhead cabinets and splashbacks The minimum required height between your benchtop and overhead cabinets is 600mm and the depth of overheads should be 320mm. This ensures that you don’t hit your head when working at the benchtop!Aug 25, 2020.
How high are kitchen cabinets from the floor?
Cabinets are sold in standard heights of 30, 36, or 42 inches. With an upper cabinet mounting height of 54 inches, the top of the upper cabinets would sit at 84 or 90 inches off the ground for the shortest of standard cabinets.
How deep are frameless cabinets?
Standard – 12″ and 24″ depths including the door/drawer.
How much should a countertop overhang?
How far should a countertop overhang on the side? Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
How thick should cabinet doors be?
The thickness will depend on your preferences, but plywood ½- ¾ inches thick is a common choice.
What is standard countertop depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
How thick is a countertop?
The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.
What are dishwasher dimensions?
Considered the standard style, typical built-in dishwashers are about 24 inches wide, 24 inches deep, and 35 inches tall to fit most cabinet openings in residential kitchens.
Where should I put my pantry?
Some of the best cabinet pantries are located next to the fridge, sink or range. Think outside the single pantry. You may have convinced yourself that your pantry needs to be one space. In fact, you may be happier having multiple pantries dedicated to different food items.
How deep should kitchen drawers be for pots and pans?
The most common layout for drawers is 2 boxes at 10” high and one at 4” high. You may find a two-drawer stack works best with two extra deep drawers. If you want to store a lot of baking sheets or utensils you might want to consider one 10” deep drawer with three 4” deep drawers above it.
Do kitchen cabinets have to go to the ceiling?
It is prudent to surmise that kitchen cabinets that go all the way up to the ceiling are great for aesthetic purposes. You can decide to have some lighting in the front cabinets in order to avail some modern look in stark contrast to working with the open space just above the cabinets.
How deep should drawers be?
Drawer depth or height is not critical, but the most common difference between the drawer and the opening is 3/4 inch. For example, if the opening measures 4 inches vertically, the drawer should be built 3 1/4 inches. This allows 1/4 inch at the bottom where the slide is attached, and 1/2 inch at the top for clearance.
