Table of Contents
What are the requirements for EDDM?
EDDM Retail’s Size requirements Minimum Size: Be greater than either 6 1/8 inches high or 10.5 inches long on one side. Maximum Dimensions: No side can be longer than 15 inches or 12 inches high. Weight: Cannot weigh more than 3.03 ounces. Thickness: Must be thicker than 0.007″ and less than . 75″ thick.
How much space is needed for an address on a postcard?
The address can be placed anywhere within a specific space on the postcard. This area is 1/2” from the left and right edge of the card, 3/4” from the bottom and is 2-1/8” tall. If a return address is included, it should be located 1/4” from the top left side of the postcard.
How do you address EDDM?
EDDM® Requirements The indicia and the address must be on the same side of the mailer. The whole of your mailing address / label must also be located in the top half of your mailing piece. The orientation of your address / label (i.e. whether your label is applied horizontally or vertically) does not matter.
How much space should you leave at the bottom of an envelope?
The bottom address line should be at least 5/8 of an inch from the bottom of the envelope. The left and right edge of the envelope should have 1/2 inch of space from both edges. This frames the area called the MLOCR READ AREA which must contain only the address of the recipient to ensure proper reading of the address.
Does EDDM need to be a flat?
EDDM-Retail must be part of a saturation flats mailing with all pieces bearing simplified addresses meeting the saturation and addressing standards in 602.3. 0. Each mailing must consist of 200 or more pieces or 50 or more pounds of mail up to a maximum of 5000 pieces per day per 5-digit ZIP Code.
Do you need a permit for EDDM?
You won’t need a mail permit to do EDDM Retail. This is by far the most popular option for the majority of businesses and organizations looking to send an EDDM campaign. One note about EDDM Retail: your mail pieces mustbe taken to the Post Office designated for your route(s).
What are the rules for postcards?
To qualify as a postcard, a mail piece must be rectangular and meet these dimensions: At least 3-1/2” high X 5” long X 0.007” thick. No more than 4-1/4” high X 6” long X 0.016” thick. Have finished corners that do not exceed a radius of 0.125”Jun 14, 2018.
Can you mail envelopes with designs on them?
You may use colored cards and envelopes for mailing (as well as different ink colors) if there is no interference with the reading of the information or postmark. First and foremost, the mailing recipient’s information should be clear and legible.
Does the address side of a postcard have to be white?
USPS guidelines specify certain are that must remain devoid of printing. They are the back side, the mail orders area, and the print and address areas. They must also be totally white and contain no text or graphics.
Can EDDM be in an envelope?
A: No. EDDM® offers are mailed solo. Your offer will never be inserted into an envelope, combined with other offers, or mailed as part of a publication.
How do I get an address list for mailing?
Consider joining or referencing the association for guidelines and direction when starting out on a direct mail campaign. Experian: Direct Mailing Lists. Direct Marketing Association: DMA Releases Compliance Report. USPS: Direct Mail Campaign. USPS: Find Mail Service Providers.
How effective is Every Door Direct Mail?
Who is EDDM most useful for? The types of businesses and organizations that benefit most from running EDDM campaigns are those that rely on a localized customer base.
Where can I put graphics on an envelope?
When Designing Envelopes, Keep Postal Regulations in Mind You’ll need to limit the use of both the return address information and any graphics to the envelope’s upper left corner in order to meet the regulations of the post office. Also, the envelope’s face needs to be left blank.
Do you have to put a return address on postcards?
Answer: A return address is not required on your postcard but if the post office cannot deliver your postcard, they won’t be able to return it to you without a return address. If you want to make your postcard even more unique, especially during the holiday season, use custom postage stamps to make your mail standout.
Where does the barcode go on an envelope?
Where the IMb? On letters, the IMb is located in the address block or the barcode clear zone in the lower right of the envelope. On flats, it must be on the address side (or front side) of the mailpiece and at least 1/3-inch from any edge of the piece. The IMb is typically printed by the mailer or the presort house.
What size postcard can be mailed EDDM?
Choosing the Right Size EDDM Postcard. Every Door Direct Mail® postcards typically come in three different sizes: 6.25″ x 9″, 6″ x 11″, and 8.5″ x 11″. All three sizes mail at the same EDDM® postage rates, so you might consider getting more out of your postage with a larger sized postcard.
Can EDDM be 5×7?
Size of an EDDM mail piece Letter mail has a maximum dimension of 6 1/8 high x 11 ½ wide. Some familiar sizes for letter mail are a #10 envelope and post cards measuring 4 x 6, 5 x 7, 5 ½ x 8 ½ or 6 x 9. Flat mail is a mail piece that exceeds the maximum dimension for letter mail in either the height or width.
How do I create a postcard on EDDM?
9 Tips for Designing a Successful EDDM® Postcard Headline. Start the postcard with a simple, yet bold opening statement. Message. Establish why people should choose you over your competition. Coupon or Discount. People love a good deal. Call to Action. Call to action! Contact Information. Photos. Logo. Testimonials.
