Table of Contents
To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.
How long should my arrows be for a 28.5 draw?
A good rule of thumb is to cut it no shorter than the middle of the riser. At full draw, your arrow end would sit right in the middle of the shelf.
How long should my arrows be for a 27 inch draw?
The arrow must be 29″ in length and supported by two points, which are 28″ apart. The number of inches the arrow deflects or bends due to the weight, is the spine size or measurement of an arrow. DYNAMIC spine describes the way an arrow reacts from the stored energy of a bow as it is shot.
What is the average draw length?
If you have an average draw length of 27 to 29 inches, any modern compound bow matched with a good arrow and set to 60 pounds will work just fine on whitetails, mule deer, pronghorns, and the like with whatever broadhead style you prefer, so long as your shot placement is good.
How is draw weight calculated?
To measure a bow’s draw weight, you’ll need a weight scale. You take the measurement by attaching the scale to the bowstring near the nock, pulling the string to full draw, and reading the scale. To eliminate human error, take the measurement multiple times.
How long should arrows be for a 26 inch draw?
How to: Select the perfect arrow Bow Arrow length Draw weight lb. 25″ 26″ 15-20 700 700 20-25 700 700 25-30 700 600.
How do you determine arrow length?
The standard way to measure arrow length is from the back of the point to the throat of the nock. Your draw length and arrow spine will influence your arrow length. If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches.
How long should my arrows be for a 29 inch draw?
it depends on the arrows you choose, you need at least 1/4″ of arrow overhang on the rest. so you can probably shoot an arrow that’s about 28 1/4 for rests that are set up normally. and go all the way up to full length 36″ arrows for indoor. i would suggest 1″ of overhang on your rest.
How long should your arrows be compared to your draw length?
The best safety practice is to make sure your arrows sit at least 1″ beyond your arrow rest when the bow is at full draw. A little bit of extra arrow length gives the arrows an important margin of safety. A little too long is okay. A little too short is not.
Whats the shortest you can cut an arrow?
Arrows that are cut too short can be drawn past the arrow rest which could result in the arrow falling from the string, jamming, or otherwise causing damage to the arrow or the bow, and could even lead to personal injury. Never shoot an arrow that is less than one inch past the arrow rest at full draw.
How do I know if my draw length is too long?
The bow arm should move toward the target when the shot is fired. If the bow arm drops or swings to the side, the draw length is probably too long. When this happens, the scapula has already pushed the bow arm out as far as it can extend before the arrow is released.
Does draw length affect accuracy?
Many bowhunters shoot a draw length that is too long for them, which hurts shooting form and degrades accuracy. You hear this all the time–that a long draw overextends your bow arm and makes it harder to hold against the back wall and to maintain a consistent anchor point.
Does draw length affect draw weight?
Yes, changing to a longer draw length on a bow increases the draw weight. Reduce the draw weight with the oimb bolts if you can.
What does arrow size 400 mean?
The numbers refer to the spine of the arrow. The different spines refer to the stiffness, a 400 spine arrow is generally for bows 40-60 lbs. 350 spine is for bows roughly 55 – 75 lbs, and a 500 spine arrow is for bows roughly 30 – 50 lbs.
How long is my draw length?
To determine your proper draw length, stand upright, spread your arms out to the side and have someone measure your wingspan between the fingertips of your middle fingers. Then, divide that measurement by 2.5. In archery, consistency is the key to accuracy.
Is Arrow length the same as draw length?
Draw length – Put simply your draw length is how far you draw back the bow string to your anchor point. This is measured in inches so mine is a just under 28 inches 27 1/2 if you want to be exact. Arrow length – Your arrow length is how long your arrow is.
How long is a 340 arrow?
As you cut those arrows to fit your draw length, you make them stiffer. That’s why Gold Tip recommends the 400 spine for a 27-inch arrow shot at 60 pounds, as compared to the 340 at 30 inches. Understand that the manufacturers’ charts refer to arrow length, not draw length.
What happens if arrows are too long?
If, however, by being too long, the arrow’s dynamic spine is too low, then the arrows will not be accurate as they will tend to “fishtail” in flight. They will also tend to fly to the right (for a right handed archer).
What weight arrow should I shoot?
If you want to target practice, you want the arrow to weigh in total (shaft, vanes, insert, nock and field point combined) around 5 to 6 grain per pound of draw weight. So if your bow has 60 lbs. of draw, you want to use arrows that weigh in total between 300 and 360 grain.
Why do you cut down arrows?
You cut arrows to lower the total weight. Shorter arrow equals more speed. Spine can also be changed by cutting which aids in tuning the arrow to the bow. You can also change the effect of spine by changing point weight.
