Table of Contents
What size should I make drawers?
Drawers can be built almost any width for bottom mount, but the most common size is 3/4-inch smaller on both sides than the cabinet opening. For example, if the opening is 12 inches wide, the drawer should be built 10 1/2 inches wide.
How do you determine what length drawer slides you need?
Measure the box, not the drawer front Start at the back of the box and measure to the front of the box without including the face of the drawer. Once you have the length, round the number down. For example, if the drawer is 20 ½ inches long you will need to purchase 20 inch drawer slides.
How long should a drawer slide be?
Measure from the back of the drawer-front to the end of the drawer box. Only measure the box, do not include the drawer front. Round the measurement off to the lower number on the tape. For example, when the measurement is 22 1/2 inches, you need to purchase 22-inch drawer slides.
What sizes do drawer slides come in?
Shop by Drawer Slide Size Below 8-10″ Drawer Slides. 1-8″, 2-9″ and 9 versions of 10″ drawer slides from Hettich, Fulterer, and Hawthorne & Reid. 12″ Drawer Slides. 14″ Drawer Slides. 16″ Drawer Slides. 18″ Drawer Slides. 20″ Drawer Slides. 22″ Drawer Slides. 24″ Drawer Slides.
How thick should drawer sides be?
The sides and back of the drawer should be 1⁄2” or 5⁄8” thick. Use thinner stock for smaller drawers and thicker stock for big ones. The bottom is usually 1⁄4“-thick plywood for small drawers or 1⁄2“-thick material for bigger drawers, or drawers that will hold heavy objects.
How do you calculate drawers?
With or without a drawer box to measure, here’s how to measure drawer size for a perfect fit: Measure the cabinet opening width (inside frame to frame) and subtract 1” from the width of cabinet frame opening. Measure the cabinet opening height (inside frame to frame) and subtract at least 1/2” from the opening height.
Can drawer slides be shorter than drawer?
You should always use the longest slide possible for your application, without exceeding the drawer depth into the cabinet. The Height of a Drawer Slide is usually only a limiting factor, in the sense that you can’t install a slide that is taller than your drawer or pull-out.
What are the easiest drawer slides to install?
Mounting location: Side mounted drawer slides are the most popular and easiest to install. Center mount and undermount are also options.
What size drawer slides for a 21 cabinet?
Most vanities have 16 or 18-inch drawer slides. Similar to a kitchen cabinet, and with the standard vanity top depth at 21-inches, you’ll find the finished depth of vanities mostly support a 16 or 18-inch drawer slide.
Do drawer slides have to be the same length as the drawer?
Typically, side-mount ball-bearing slides should be the same length as the drawer box. For undermount slides, be sure to check the spec sheet—drawer boxes for these slides must be built to specific depths (front to back) in order to work properly.
How much space do you need for drawer slides?
You can get side-mount slides in ¾ or full extension, which refers to how far the drawer boxes pull out of the cabinets. Most side-mount slides require 1/2” to 17/32” of clearance on each side of a drawer. That means each drawer should be 1” to 1-1/16” smaller than the opening to fit properly.
What thickness ply for drawers?
Plywood for most drawers is 1/4 inch thick but can be 1/2 inch thick on large drawers. You can find these materials in many different types of hardwood so that one or both of the outer veneers can match your drawer boxes and/or fronts.
How tall does a file drawer need to be?
The recommended minimum interior drawer box height is 9-1/4”. Recommended exterior minimum drawer box heights would be as follows depending on the bottom thickness and bottom inset. File slots are centered on the front and back.
How wide can Drawers be?
The rule of thumb is 1.5 times the length of the drawer slide. If you have a standard depth kitchen cabinet then the normal length of drawer slide is 22”. If you multiply 22” x 1.5 = 33”. You can go wider, but the wider you go the more chance that the slide will not pull out as smoothly as you hope or expect.
Are drawer slides adjustable?
You’ll find built-in adjustments for almost all drawers on the cabinet glide and the drawer glide. The horizontal adjustments are on the cabinet glide. All you need is a screwdriver to adjust any drawer.
Can you install side mount drawer slides as undermount?
Additionally, side mounts are built to carry a limited load, and if it is used as an undermount, there is a huge possibility that it might bend and malfunction. So for these professionals, the answer to the question “Can you use side mount drawer slides as undermount” will always be no.
How do you measure a drawer opening?
From the opening, you need to measure the width – from side to side horizontally – and height -from top to bottom vertically. The opening is the space that the new box fits in. There two types of mount guides that you can choose when installing drawer boxes. Each mount changes the measurements of the opening.
How is drawer depth measured?
Begin by measuring along the bottom floor of the drawer at the back edge, middle, and front edge. Check for variations across the height of the drawer as well. Take the smallest of these measurements. Repeat this step for the depth measurement on the left edge, middle, and right edge across the floor and the height.
