Table of Contents
A cord is a neatly stacked pile of wood measuring 4 feet by 8 feet with each piece of wood 4 feet in length. A face cord has the same general measurements, but the depth of the pile is the length of the firewood logs, not 4 feet, i.e., 4 feet by 8 feet by 20 inches assuming each log is 20 inches long.
How many face cords are in a full cord of wood?
ft. A face cord refers to a stack of cut and split firewood 4′ high by 8′ long by the length of the firewood, usually 16”, 20” or 24”. In theory, a standard cord should yield three 16” face cords or a volume of 128 cu.
How wide is a face cord?
There are several other terms used for firewood measurement. They include a face cord or rick cord, both of which often refer to a stack of wood that is 4 feet high by 8 feet long and roughly 16 inches wide (or the length of the firewood pieces). Thus, a face or rick cord is usually smaller than a full cord.
Will a face cord of wood fit in a pickup?
Consumers should be on their guard, because a pick-up cannot hold a cord of firewood. An 8-foot truck bed can hold one-half of a cord while a 6-foot bed can barely hold one-third of a cord.
How tall is a face cord?
A face cord of firewood is equal to a single stack of firewood that measures four feet high by 8 feet long by however deep the depth of the firewood is.
How much should a face cord of wood cost?
Face Cord of Wood Price A face cord is typically one-third of a cord of wood and costs between $120 and $200. Face cords take up about 42.6 cubic feet and are often organized into a four-foot by eight-foot by 16-inch space.
What is a loggers cord of wood?
What is a loggers cord? A loggers cord contains the same amount of cubic feet as a full cord but because the logs are in 8′ lengths a single loggers cord would be stacked 4′ high x 4′ wide x 8′ deep. This year we purchased 20 loggers cords and spent $1500.
How much wood is a half face cord?
A face cord is equal to a single stack of wood four feet high and 8 feet long and as deep as the length of the firewood being sold. A ½ face cord is a stack of wood four feet high and four feet long. A 1/4 face cord is wood stacked 2 feet high and 4 feet long.
Is a face cord half a cord?
Face cords often measure 4′ high x 8′ long x 16″ deep. Yes, that’s 16 inches. This means that your typical face cord contains only one-third the amount of wood as a full cord. If you find a face cord that measures 4′ high x 8′ long x 24″ deep, then you’re getting a half-cord of wood.
How many cubic ft is a face cord?
The depth is generally 16 inches (410 mm) (for use in residential fireplaces) but can be anything from 12 to 32 inches (300 to 810 mm). This results in a volume of 32 to 85 cubic feet (0.91 to 2.41 m3).
Will a 1/2 cord of wood fit in a pickup?
A full cord can weigh up to 5,000 pounds. Small Pickup — 1/4 ton With or without racks this truck bed holds approximately 1/2 (one-half) cord of wood. Long Bed Pickup — 1/2 or 3/4 ton Without racks this truck bed holds approximately 1/2 (one-half) cord of wood.
How many Rick’s are in a cord?
A cord of wood will be 4 x 4 x 8 feet, and each section called a rick, will be a 4 x foot section of 16 to 18-inch logs. Often called face cords, the ricks are split into three groups that constitute the cord’s entirety.
How many cords of firewood do you need for winter?
The Size of Your House For a 1000 square foot house, you are going to need an average of 3 cords per season. If you have a large house which is around 4000 square foot house, then you’d approximately need about 12 cords for a regular winter. While for a medium sized 2000 square foot house, 6 cords should be enough.
What’s bigger a cord or a rick?
Rick actually refers to the same amount of firewood as a face cord. A rick or face cord of firewood is the same height and width as a full cord. The difference is that a full cord measures 4 feet deep, whereas a rick or face cord measures 16 to 18 inches deep.
What is the difference between a bush cord and a face cord?
A cord is a unit used to measure the dry volume of firewood, and the size of a cord of firewood is 4′ wide, 8′ wide and 4′ deep. A cord can also be known as a full cord of firewood or a bush cord, while a face cord of firewood can be smaller in size.
How much does a face cord weigh?
A face cord of kiln-dried firewood weights 1,200 pounds. This fact is one of many that makes our firewood burn bright and burn right. A regular face cord of wood 8′ X 4′ X 16″, not kiln dried will weight 400 pounds more. This means you have to burn of 50 gallons of water in the wood to get it to burn.
