Table of Contents
Size: Drywall that’s 4 feet wide, 8 feet long is the most common size you’ll find. 4×8 drywall is perfect for small- to medium-sized projects. 4×12 drywall is another option if you have tall or long walls. Thickness: Drywall panels usually come in four different thicknesses: 1/4”, 3/8”, 1/2” and 5/8”.
What sizes do drywall sheets come in?
Drywall Length and Width The length and width of drywall sheets are usually in multiples of 4 feet—most commonly, 4-foot by 8-foot, 4-foot by 12-foot, or 4-foot by 16-foot sheets. Building codes often have specific requirements for the thickness of drywall sheets but not for the width and length.
How much does a 4×8 drywall sheet cost?
The average price for drywall and sheetrock is $15 per 4′ x 8′ panel, with a typical range of $12 to $20 per panel. This translates into a cost of $0.40 to $0.65 per square foot.
What is the actual size of 1/2 inch drywall?
Drywall is sold in several standard thicknesses: 1/4-inch (6.35mm) 3/8-inch (9.52mm) 1/2-inch (12.7mm).
Can you hang sheetrock on 24 centers?
drywall thickness, lightweight is ideal for ceilings that have joists 24 inches on center. drywall has always been approved for use on 24-in. spacing on ceiling framing, but because of heavy sagging insulation, wet ceiling textures, or higher humidity, either a 1/2-in. ceiling board or 5/8-in.
What is the largest sheet of drywall?
4 x 12-Foot Drywall: The longest length available. Ideal for great rooms and areas with high ceilings. It covers more area in fewer panels.
How many sheets of drywall do I need for a 12×12 room?
How much does it cost to drywall a 12×12 room? The cost to install drywall is about $2 per square foot. After material and labor are added in, the cost per panel ranges from $60 to $90. A typical 12 by 12 foot room, for example, will use 18 panels.
Why is drywall so expensive?
There are a bunch of reasons drywall prices can rise. As with most commodities, increased demand or decreased supply can have an affect on drywall board prices. You don’t want to set up your construction loan and then find out prices have skyrocketed for the building materials.
What kind of drywall do you use in a garage?
For the majority of your garage, you can use standard 1/2 inch drywall. For the ceiling and wall abutting the house (if this is an attached garage), you should use 5/8-inch sheetrock or type X fire-rated drywall.
How many screws go into a sheet of drywall?
How Many Screws Per Sheet of Drywall. Use about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.
How far apart are studs?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.
Do ceilings have to be 5/8 drywall?
5/8″ Type X is most commonly used for ceilings due not only for its rigidity (no sagging), but also its fire-resistance and acoustical blocking. You’ll certainly want to use at least 2-inch drywall screws to hang it. Not sure adhesive is necessary or recommended unless you are covering existing drywall.
Should I drywall walls or ceiling first?
Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level.
How far can you SPAN 1/2 drywall on ceiling?
What is the maximum joist spacing for ceiling drywall? Does it matter if the panels are oriented parallel or perpendicular to the joists? 1/2- or 5/8-inch drywall is 24 inches on-center. Ceiling drywall should always be installed perpendicular to the joists, even when they are 16 inches on-center.
Should I hang drywall vertical or horizontal?
Horizontal hanging reduces the lineal footage of seams by about 25%. Keeping the footage of seams to a minimum will result in less taping and a better looking finished job. Hanging horizontally also allows the drywall to flow over the framing so that bowed studs create less of a problem.
Which is better drywall or sheetrock?
No, there is no difference between Sheetrock and drywall. Sheetrock would likely be the standard for what drywall should be. If you see in a tutorial that you should use Sheetrock, you can use any type of drywall available to you. Whether the drywall will be as high quality as Sheetrock is a different question.
How many sheets of drywall can be hung in a day?
you should be able to do a a bedroom of twelve boards or so in a day without trouble. Hang, as to fasten the boards to the wall, I’d say 11 boards. Hang, as to fasten the boards to the wall, I’d say 11 boards.
Where can I use 1/4 inch drywall?
Quarter-inch drywall is often used to cover damaged plaster walls and also for curved areas because it bends easier than thicker drywall. Then the 1/4-inch-thick drywall can be double layered to get to the conventional 1/2 inch thickness to match the rest of the wall.
