Question: How Are Tire Sizes Read

The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.

What does the 265 70R17 mean?

How to read your tire size long description. An arrow points to the numbers 265/70R17 115T on the inner part of the tire sidewall. 265 is the width, 70 is the aspect ratio, R stands for radial, 17 is the wheel diameter and 115T is the load index and speed symbol.

What do tire numbers and letters mean?

Also known as the service description, the number indicates the maximum load the tire can support when inflated properly, and the letter represents the maximum speed capability of the tire. In our example, a load index of 92 means that the tire can support 1,389 pounds at maximum air pressure.

What does r20 mean on a tire?

Bias Belt. D. Diagonal. 20. The tire size was designed to fit rims or wheels that are 20 inches in diameter.

What size tire is P265 70R17?

265/70R17 tire size in inches. 265/70R17 tires are 31.6″ tall, have a section width of 10.4″, and fit wheels with a diameter of 17. The circumference is 99.2″ that translates into 638 revolutions per mile. As a rule, they can be mounted on the wheels with 17″ x 7-9″(LT Tires 7-8.5″) rim width.

What is P265?

Let’s take for example P265/60R18. This code gives you the following information about your vehicle’s tire: P = Passenger Tire (Light Truck Tires will begin with the prefix LT). 265 = Section Width in millimeters (measured at the widest part of the tire from sidewall to sidewall).

What is the difference between a 60 and 65 series tire?

The 65% aspect ratio (as in 235/65/17), compared to 60%, adds almost 12 mm (1/2″) to the radius of the tire (0.65-0.60)*(235mm)=11.75mm.

What does 50r mean on tires?

50 is the two-figure aspect ratio. This percentage compares the tire’s section height with the tire’s section width. For example, this aspect ratio of 50 means that the tire’s section height is 50% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.

What does XL mean on a tire?

XL tyres have been especially developed for use with heavy loads. Generally speaking, the tyre name XL is used for heavy duty tyres. However, the labelling varies between tyre manufacturers. Sometimes you might have XL tyres that are also labelled “reinforced” (RF or RFD), or models labelled EL (Extra Load).

What does P215 65r15 mean?

How do you read tire letters?

TIRE SIDEWALL MARKINGS P =Passenger Car Tire. The first letter on a tire indicates the tire’s class. 245 =Section WidthTread (mm) 45 =Aspect Ratio. Z =Speed Rating S = 112mphT = 118mph. R =RadialConstruction. 19 =WheelDiameter(inches. 98 =LoadIndex. W=Speed Rating.

Can I use 225 tires instead of 235?

Can 225 fit 235 tires? Yes, they can. 225 tires are 10 mm narrower and 15 mm lower in height than the 235 tires. Besides, 235 tires are wider than 225, and so we recommend checking the owner’s manual.

What does the C stand for in a tire size?

The C-Type tire, on the other hand, is specifically meant as a commercial-rated tire, with a higher load rating for a given size than many LT tires. These C-Type tires will show the letter “C” immediately after the wheel diameter in the tire code. Example: 225/75R16C.

Can I use 245 tires instead of 235?

So you have already identified the difference between 235 and 245 size tires. It is obvious that 245 is bigger than 235, still, both tires’ sizes are pretty common and could be interchangeable at times.

What does Zr mean on tires?

Tires having a maximum speed capability over 149 MPH may have “ZR” in the size designation. Tires with a maximum speed capability over 186 MPH are required to include “ZR” in the designation. Below are examples of tire sizes with a “ZR” speed rating.

Can I use 265 70R17 instead of 265 65R17?

It means, there is no difference in the width of the tires. Since the width is the same for both 265 65R17 and 265 70R17, you can install any one of these if you are not bothered with the other aspects of the tire.

What does 65R17 mean?

This number indicates that your tire has a width of 265 millimeters. 65. This number means that your tire has an aspect ratio of 65%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 65% of the width.

Will 265 65R17 fit 265 70R17?

They’re usually for a range of sizes, so one’s that fit 265/65r17 would probably fit 265/70r17 as well, unless the 65 series is the max out for that chain.

What size is 265 75r17 in inches?

Plus Sizes 265/75-17 265/70-17 Diameter inches (mm) 32.65 (829.3) 31.61 (802.8) Width inches (mm) 10.43 (265) 10.43 (265) Circum. inches (mm) 102.57 (2605.32) 99.29 (2522.07) Sidewall Height inches (mm) 7.82 (198.75) 7.3 (185.5).

What does LT265 75R16 mean?

This formula is a quick way to get the tire diameter of those metric tires that are common on just about everything stock. For example a LT265/75R16 would be around 31.6 inches tall and 10 inches wide. “LT” means Light Truck and “P” means Passenger tire. The bigger number (on the left) is the Section Width.

What does 115T mean on tires?

The 115T signifies that the tire has a 4ply standard load sidewall. The 121S signifies a 10 ply load range E sidewall. The standard load tire is best for a half ton truck, whereas the load range E sidewall is best for a 3/4 and 1 ton truck.