Table of Contents
Lift the mantel and position it in place, aligning the holes in the back of the mantel with the support rods. Push the mantel onto the rods until the back of the mantle is against the bricks. Gently tap with a small hammer and a small piece of wood if necessary to completely align the mantel next to the brick.
How are fireplace mantels attached to brick?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How do I remove a wood mantel from Brick?
How to Remove a Mantel From a Brick Wall Remove any decorative trim around the outside edges of the mantel. Insert the short end of an I-beam construction pry bar between the back edge of the mantel and a brick wall. Cut through the mounts with a reciprocating saw to release the mantel.
How do you remove a fireplace mantel?
Pound the bottom of the mantel shelf with a rubber mallet to separate it from the wall if it doesn’t release when you pry the base of the mantel away from the wall, advises Fireplace Town. Tap it gently, but with enough force to pull the nails from the wall. Once it’s loosened, pull out on the shelf to remove it.
How are mantels attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. A rubber mallet can also be used to help ease the mantel out of position if it’s stuck.
How do you secure a mantel to brick?
Mark where the anchors or brackets line up on the mantel and drill the corresponding holes. Lift the mantel and place it so that the lag bolts or brackets fit into the holes. For extra security, coat the tip of each bolt with liquid nails or another adhesive just before installation.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How are fire surrounds fixed to the wall?
Fire surround attached with brackets Many modern fire surrounds use a hidden fireplace fitting bracket. One bracket is fit to the wall, while a corresponding second bracket is screwed to the fire surround. They then simply slip together without the need for any messy looking screws around the edges.
How do you attach a floating mantel to brick?
Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you attach a wood mantel to a brick fireplace?
Lift the mantel and position it in place, aligning the holes in the back of the mantel with the support rods. Push the mantel onto the rods until the back of the mantle is against the bricks. Gently tap with a small hammer and a small piece of wood if necessary to completely align the mantel next to the brick.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
Why do fireplaces have mantles?
Why Do Fireplaces Have Mantels? The purpose of a fireplace mantel was traditionally to catch smoke before it entered the room from the firebox of an open fireplace, but mantels in more modern times are used primarily for decorative and aesthetic purposes.
How thick are mantels?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
What is the best way to drill into brick?
Begin by drilling a pilot hole using a small masonry bit. Then, attach the larger bit and drill again to make a bigger hole. Make sure the drill is perpendicular to the brick wall. Drilling through brick and mortar places stress on the drill, causing it to heat up.
Can you have a mantle without a fireplace?
Even if you don’t have a fireplace, there’s no reason not to have a mantel as the focal point of your living room. Creating a faux mantel lets you enjoy all the design potential of a cozy hearth without the care and worry a real fireplace can bring.
Can you use a reciprocating saw to cut bricks?
Reciprocating saws can cut through brick and mortar, as well. You will need a blade specially designed for cutting through brick and concrete first, though. Diamond/carbide blades will also work.
What is a brick chisel?
Also called a bolster or brick set, the brick chisel is used to make smooth cuts on bricks. Rough cutting of brick is usually done with a brick hammer (which has a chisel-like blade opposite the face of the hammer). Brick chisels should not be used for cutting stone, as they will quickly lose their edge. Jul 9, 2013.
What kind of saw do I need to cut brick?
A circular saw fitted with a masonry blade will cut both brick and mortar, producing clean lines, but with a great amount of debris. An angle grinder with a masonry wheel also will cut through both the brick and the mortar and allows for tighter angles.
