Table of Contents
How Are Fireplace Mantels Attached? Standalone floating fireplace mantels can either be attached to a wall using lag screws or installed onto a back board, while mantels as part of a complete fireplace surround may be screwed into the wall using brackets.
How do you remove a fireplace mantel?
Pound the bottom of the mantel shelf with a rubber mallet to separate it from the wall if it doesn’t release when you pry the base of the mantel away from the wall, advises Fireplace Town. Tap it gently, but with enough force to pull the nails from the wall. Once it’s loosened, pull out on the shelf to remove it.
How do you remove mantel from drywall?
Work the pry bar between the edge of the mantel and the drywall, starting at the lowest point, and slowly push the mantel away from the wall. If you are removing a ledge-style mantel, work from the bottom. However, if you are removing a surround, working at the base of the fireplace upward is best.
How do you hang a mantel on a brick fireplace?
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you install a wood mantel on a brick mantel?
Lift the mantel and position it in place, aligning the holes in the back of the mantel with the support rods. Push the mantel onto the rods until the back of the mantle is against the bricks. Gently tap with a small hammer and a small piece of wood if necessary to completely align the mantel next to the brick.
Can I remove my fireplace insert?
A wood-burning fireplace insert must be removed when your fireplace and chimney enclosure need cleaning. Most wood-burning fireplace inserts are heavy and are secured to the enclosure with screws or bolts. If you don’t want to hire a professional to remove the fireplace insert, you can attempt to remove it yourself.
How do you replace a fireplace mantel?
Here’s how to replace your fireplace mantel in a few easy steps. Step 1 – Remove the Old Fireplace Mantel. Step 2 – Measure. Step 3 – Purchase a New Fireplace Mantel. Step 4 – Attach the Support Ledger. Step 5 – Prepare the New Mantel. Step 6 – Attach the Mantel to the Support Ledger Board. Step 7 – Secure the Mantel.
How do you attach a floating mantel to the wall?
Make sure those marks are level, centered and extend far enough to cover the mantel’s length. drill holes at each mark. Drill Sleeve Holes. insert lead sleeves into holes. Insert Sleeves. drive lag bolts. Drive Lag Bolts. Drill Mantel Holes. Mark on the rear of the mantel where the lag bolts will hit. install the mantle.
Can you drywall around a fireplace?
In the fireplace world, even fire-rated drywall is considered to be combustible and should be installed with the necessary clearance. The only instance in which it is acceptable to install drywall around a fireplace is when you have a zero clearance fireplace.
How do you remove an old mantel?
Place a pry bar along the side of the mantel and tap in place with the hammer if it is a full mantel. Begin at the top edge and pry the mantel off the side of the fireplace. Move the pry bar down the side length of the surround; tap the pry bar in place and pry the side piece off until you’ve removed the entire piece.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
Can you put wood over a brick fireplace?
Masonry veneers are designed to follow a very straightforward installation process. Typically, installing wood facing over masonry is a two-part process: First mount batts (thin wood boards) to the masonry with concrete screws and then install the wood facing over these with regular screws or nails.
How do I remove a wood mantel from Brick?
How to Remove a Mantel From a Brick Wall Remove any decorative trim around the outside edges of the mantel. Insert the short end of an I-beam construction pry bar between the back edge of the mantel and a brick wall. Cut through the mounts with a reciprocating saw to release the mantel.
How much does fireplace insert cost?
How much does a fireplace insert cost? Most fireplace inserts and a professional installation cost about $2,000 to $4,000, depending on the state of your existing chimney and the model you select. Some electric models cost significantly less, but they offer less heat output than wood and gas fireplace inserts.
What is the purpose of a fireplace insert?
A fireplace insert is a sealed box that is placed (inserted) into an existing masonry fireplace. As a result, the old inefficient wood fireplace is upgraded to a new high-efficiency wood, gas, or propane fireplace that will produce more heat and use less fuel.
Is a fireplace insert worth the money?
Are Fireplace Inserts Worth the Money? Savings: Fireplace inserts can help you to cut down on your heating bill. A fireplace insert is not recommended as a sole use of heating but when used in conjunction with turning down your thermostat, can save you money on your heating bill.
What is the difference between a fireplace and a fireplace insert?
Fireplaces will have large viewing areas and box dimensions because they are designed to be built into new construction and not limited by the existing fireplace opening size. A fireplace insert is basically a stove, wood or gas, that is designed to be inserted into a fireplace that is already there.
How does fireplace insert work?
An insert is basically a fireproof box that’s surrounded by steel or cast iron and fronted by insulated glass, creating a closed combustion system. The steel or cast iron helps to trap the heat. Some inserts have a blower that pushes the hot air back into the room through front vents.
