Table of Contents
For really wide drawers, we always recommend using two cup pulls, and then evenly space them. As a general rule of thumb, if your drawer is 30″ or wider, I like to use two cup pulls. Lastly, if you have tall drawers, you can either center them in the overall drawer, or install them on the top rail.
What size drawer needs 2 pulls?
Drawers wider than 18″ need two knobs/pulls, whereas drawer narrower need only one. If a drawer is wide enough to need two knobs, they should be set about 1/6th of the drawer length from each end (roughly).
How many drawer pulls on a 36 drawer?
When you get to the 36 inch drawer widths, it gets a little tricker. Due to the long length and the limited pull lengths for sale outside of bar pulls, I’m recommending 2 pulls per drawer.
What are standard drawer pull sizes?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another).
What size pulls for 36 drawer?
Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
How do I choose drawer pull size?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
Do you put pulls on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
What size pulls for 33 inch drawers?
Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter. Large Drawers that are 30” to 48″will require a pull that is longer than 8″ or a knob that is 1″ in diameter or greater. Using two pulls or knobs for a large drawer also works great.
How Big Should cabinet knobs be?
Knobs that are 1 ¼” to 1 ⅜” are standard for most applications. Any knob that is 1 ½ inches or larger is generally used on larger cabinets or if someone is really trying to make their hardware stand out and look more dramatic.
Can you mix cabinet pull sizes?
There’s no “rule”, it’s a matter of looking at as many kitchens as possible and figuring out the look you prefer. I also used a variety of sized pulls on drawers of different widths, and used Restoration Hardware.
What size are drawer pull screws?
Standard #8-32 machine screw, used for drawer front knobs and pulls. Different length screws used for installing pulls and knobs.
What is the rule of thumb for cabinet hardware?
An oversized cabinet door or drawer needs a large piece of hardware for proper functionality. A good rule of thumb for traditional or transitional style pulls is that they should be about one-third of the length of the cabinet drawer. Drawers larger than eighteen inches wide may require more than one pull or knob.
Can you mix knobs and pulls on kitchen cabinets?
You can coordinate knobs and pulls from different collections by choosing the same finish. But make sure the finish matches perfectly. Even slight variations will be noticeable.
What kitchen hardware is most popular?
Top 16 Most Popular Kitchen Cabinet Knobs and Pulls Alison Value Oversized Antique Brass Knob. 3-Inch Bit Pull (Oil Rubbed Bronze) Alison Value Center to Center Bar Pull. Somerset Melon Pull 7-inch (Brushed Satin Nickel Finish) Davenport Knob (Satin Nickel Finish) Square Twist T Handle Knob (Steel).
What size drawer slides do I need?
Measure the box, not the drawer front Start at the back of the box and measure to the front of the box without including the face of the drawer. Once you have the length, round the number down. For example, if the drawer is 20 ½ inches long you will need to purchase 20 inch drawer slides.
What is the proper placement for cabinet handles?
Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
Should I use knobs or pulls on kitchen cabinets?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
What is the fake drawer under sink?
Fake drawer fronts are used to continue the visual line created by other drawers or cabinet openings. They are often placed in areas in which a drawer would not be appropriate, such as directly under sinks.
Can you glue knobs on drawers?
For functional use, however, drawer pulls are typically installed with screws. Because drawer pulls must typically endure both vertical and lateral stress, glue alone will not effectively hold a functioning drawer pull in place.
What does center to center mean on drawer pulls?
The Center-to-Center of any drawer pull is the distance between the center of one screw hole to the center of the other. Measuring the center-to-center of the drawer pull is key in determining what new hardware will fit and whether you’ll need to drill new mounting holes or fit into existing ones.
Are kitchen door handles standard sizes?
Standard pull handles tend to range between 3 and 4 inches (96 to 128mm) in width, with smaller T-pulls often used for small cabinets and drawers. As a rule of thumb, the larger the drawer or cabinet, the larger the handle should be.
