Table of Contents
Replace Gas Logs During substantial flooding like Houston experienced during Harvey, water and pieces of debris can seep into your gas burner and clog valves and into your porous ceramic logs. If you turn on your fireplace after experiencing a flood, the toxins from the flood water will burn inside your home.
Can you wash ceramic gas logs?
Things You’ll Need While some soot will build up on the ceramic logs in your gas fireplace over time, excessive soot buildup is not normal and usually signifies a problem with the combustion in your fireplace. If there is only mild soot buildup, you can safely clean the ceramic logs yourself.
Can a gas fireplace be water damaged?
The Chimney Safety Institute of America has some smart advice for heading off potentially dangerous post-flood damage: Replace gas fireplace logs. Water and small bits of debris can clog valves, and metal parts may rapidly deteriorate after exposure to water, causing gas leaks.
Can you wash gas fireplace logs with water?
Use a hand broom or soft paintbrush to carefully brush away dust and dirt on each log or decorative component. Never spray cleaners or water onto gas fireplace components. While you are cleaning, inspect each log or piece for any cracks, holes, or excessive burn marks.
Why are my ceramic logs turning black?
The most common causes of soot buildup in a gas fireplace are ceramic fire-logs that have been moved out of proper position and burner ports that are clogged. The other main cause of soot is clogged ports on the gas burner, which causes an incomplete or unbalanced burn and formation of soot on the logs and doors.
How do you clean ceramic gas fireplace logs?
How to Clean a Gas Log Fireplace Step 1: Make Sure Gas is Turned Off. Step 2: Disassemble the Fireplace. Step 3: Inspect and Brush. Step 4: Vacuum Away Dust and Cobwebs. Step 5: Polish Glass and Metal. Step 6: Wipe Down Mantle and Hearth. Step 7: Reassemble the Gas Fireplace. Step 8: Check Your Exteriors.
How long do ceramic gas logs last?
A: In the average home, a well-maintained vented log set with ceramic logs will last 10 or more years. A well-maintained vent-free log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.
Why does gas fireplace glass turn black?
The air part of the fire triangle is also the problem when the glass doors on your gas fireplace start turning black. In this case, you have an improper air-to-fuel ratio – too much fuel (gas) and not enough air to fully combust the fuel. Black glass on a propane fireplace is also caused by the wrong air-to-fuel ratio.
Why is my gas fireplace foggy?
When the outside air temperature drops below the dew point, rain or fog appears. There can be increased condensation when there is more moisture in the air and/or when the surface on the glass of the fireplace becomes colder. Once the fireplace heats up, the fog or condensation will evaporate in a short period of time.
Why is there moisture in my gas fireplace?
Each time you start your gas fireplace, you’ll notice some condensation on the glass. This is a normal part of the startup process, as the water vapor in the air inside the firebox begins to evaporate. This condensation will dissipate within a few minutes, as the firebox heats up and the flames turn yellow.
Do gas logs need to be cleaned?
While gas fireplaces don’t produce creosote, they do still need annual cleaning. A chimney sweeping in your gas fireplace will help remove items like bird’s nests, animals, and any debris that may have gotten trapped in there as well any potential soot.
How do you clean soot off of ceramic logs?
Wipe the logs with a rag. To remove soot still clinging to the logs, use a dry, soft rag. Wipe it over the whole log. The soot should brush off without exposing the logs to water or cleaner that could damage the logs or create more soot. Cleaners should only be used if they are approved in the owner’s manual.
Do ceramic fireplace logs need replaced?
If you have a vented fireplace with ceramic logs, that’s well-maintained, your log set can last a very long time, maybe even ten years or more. However, if you have a ventless fireplace with ceramic logs, and it’s well maintained, those will generally have a 3-5 year lifespan.
How do you clean soot off fireplace logs?
Use a damp rag or lint-free cloth to wipe off the soot, carbon, and dust from the logs, at least once per year. Be careful to avoid scratching the logs, or they will no longer be useable. Liquid gas log cleaners are also available at your local fireplace dealer and may make it easier to clean.
How do you get black soot off gas logs?
The best ways to clean a buildup of soot off gas fireplace logs are: Use a handheld vacuum. Scrub the logs with a soft cloth. Use a soft-bristled scrub brush. Use a cloth dampened with warm water if your fireplace manual does not warn against cleaning the logs with water.
Should gas logs turn black?
Soot on vented gas logs is nothing to worry about. It is a natural occurrence when the yellowish flames of a gas log impinge on a rough surface. Some people like the look, some don’t. If you don’t, we suggest that you VERY CAREFULLY take the logs outside and brush the soot off with a whisk broom.
Can you pressure wash gas logs?
You should never wash your gas logs. If you want to clean them on your own should take them out of the fireplace one by one, very carefully as to not damage them, and take them outside. I recommend cleaning them using a vacuum to clean them, although a brush with soft bristles would work as well.
