QA

Question: Does Shorter Draw Length Modules Reduce Draw Weight

If you go with the shorter DL module and you ADD twists to both cables, you will grow the brace height and grow the draw length. The side effects going this way, the draw weight goes up, and the holding weight goes down (more valley) as well as the slightly longer draw length.

Does draw length affect draw weight?

Yes, changing to a longer draw length on a bow increases the draw weight. Reduce the draw weight with the oimb bolts if you can.

What happens if your draw length is too short?

If the draw length is too short, you will feel “bunched up” or uncomfortable because you are too compressed. In addition, the elbow will have a fairly big bend in it in order for you to get the string to your face.

How do I reduce my draw weight?

To lower draw weight First, raise the drawing weight to its max. Next, unscrew both limb bolts one revolution (360°) and check the poundage on a bow scale. Repeat this process until you reach your desired draw weight. Only attempt to shoot draw weights in the limb’s specified range (50-60 lbs, 60-70 lbs).

How does limb length affect draw weight?

Limbs marked 42 pounds, for example, pull 42 pounds at a 28-inch draw length. The draw weight at shorter or longer draw lengths varies. In general you’ll gain 2 pounds for every inch you draw past 28 inches. So, if you have a 29-inch draw and you buy a 42-pound limb set, they’ll pull 44 pounds at your draw length.

What draw weight should I use?

Build, Bodyweight and Suggested Bow Draw Weights Type of Person/Build Weight (lbs) Compound Suggested Draw Weight (lbs) Large/Strong Child 100-130 25-35 Small/Slight Woman 100-130 25-35 Average Woman 130-160 30-40 Large/Strong Woman 160+ 45-55.

What is the best draw weight for a compound bow?

Compound Bow Draw Weight Chart Body Type Suggested Draw Weight Women and large-framed boys (100 to 140 lbs.) 30-40 lbs. Women with a larger frame & youth boys (140 to 160 lbs.) 40-50 lbs. The majority of males (160 to 190 lbs.) 55-65 lbs. Larger males (190+ lbs.) 60-70 lbs.

Is a longer draw length better?

Since the time always stays the same, we can conclude that the higher the distance (draw length), the greater the speed needed that means longer draw length leads to greater arrow speed and faster arrow.

Does a shorter draw length affect arrow speed?

With more potential energy in the drawn bow, there will be more kinetic energy in the released arrow – more arrow speed. As you lengthen your draw you must go to a longer and stiffer arrow for the same maximum draw weight.

How long should my draw length be?

Resist the temptation to make your draw length longer than it should be, as this will effect your accuracy. Your wingspan typically is the same as your height in inches; So your height in inches minus 15 and then divided by 2 will be your draw length, or at least a very good starting point.

How do I know my bow draw weight?

To measure a bow’s draw weight, you’ll need a weight scale. You take the measurement by attaching the scale to the bowstring near the nock, pulling the string to full draw, and reading the scale. To eliminate human error, take the measurement multiple times.

Is 70 lb draw too much?

For example, a bow with a 70-pound peak weight and a 80% let-off should have a holding weight of around 14-pounds. Being able to hold a bow at full draw for 30 seconds is great, but if you’re shaking, struggling, and exhausted at the end of that time, then you’re not going to be able to make an ethical shot.

Does draw weight affect accuracy?

Arrow accuracy can be effected if the draw weight is increased as an arrow’s spine needs to be matched to the draw weight. If this has been done then the arrow matches the bow. A significant increase in bow draw weight will mean that the existing arrow no longer matches the bow.

What length riser should I get?

For most physically fit adults with a draw length between 26 and 31 inches I would suggest opting for a 25-inch riser paired with short limbs for draw lengths of 26 to 28 inches, medium limbs for draw lengths of 28 to 30.5 inches, or long limbs for draw lengths of 30.5 inches and over.

Should ILF limbs be loose?

Registered. Perfectly normal to have that much play. Some risers can have as much as 1/2″ of play if the limb bolts are all the way out.

How do I know my recurve bow draw weight?

Draw Weight Recurves and longbows have incrementally heavier draw weights the farther they’re pulled. The standard for determining their draw weight is taken at 28 inches of draw length. The draw weight is marked on the bow’s lower limb with the pound sign (#),such as 35# @ 28”.

What is a good draw weight for beginners?

Draw weight Archer Archer’s Weight Compound Suggested Draw Weight Small child 31-45 kg (70-100 lbs) 15-25 lbs Large child 45-59 kg (100-130 lbs) 25-35 lbs Small woman 45-59 kg (100-130 lbs) 25-35 lbs Average woman 59-73 kg (130-160 lbs) 30-40 lbs.

Does changing draw weight change sights?

Increasing your draw weight can change your arrow’s tuning, and you’ll likely have to adjust your sight. While you’re at the archery shop, talk to the bow technician about your desired draw weight and buy the arrow spine they suggest.

How far can a 20 lb bow shoot?

Even out to about 20 yards, with a broadhead, yup. If you were good, 30-40 yards most likely. Those arrows don’t slow down as much as you think. Recurve bows are a different beast (think Arrow), but compound bows are very fast and thus there’s a lot of energy behind that arrow.

What draw weight do Olympic archers use?

Learn about all the equipment used for archery at the Tokyo Olympics. Bow: In Olympic archery, competitors use recurve bows that draw an average of around 48.5 pounds for the men and 33 pounds for the women. The bow may have a mechanical sight, but no optical enhancements.

How hard is it to pull back a 40 pound bow?

The draw weight is basically, “How strong do I need to be in order to pull this thing back?” For a recurve bow, it’s measured by pulling back to 28 inches. So for a 40 lb bow, it means that it takes 40 lbs of force to pull back the string 28 inches for a recurve.