Table of Contents
Is 1200 mode of measurement for plaster?
3.16 Plastering on lathing shall be measured separately stating the number of coats and thickness of each coat. 3.16. 1 Lathing shall be fully described and measured net; wood and steel lathing shall be measured separately [see IS : 1200 ( Part XXI )-1973* and IS: 1200 (Part VIII )-1974t] respectively.
Is code for plastering deduction?
Is plaster code a measure? Plastering Deductions as per IS Code 1200. For opening of size 0.5m2 to 3m2 area, deduction is made on one face of the wall. For openings of size above 3m2, deduction is made on both faces of the wall, but the area of sill, jamb and soffits of the opening is added.
What is is1200?
IS 1200 was adopted by the Bureau of Indian standards, after the draft finalized by the Methods of Measurement of Works of Civil Engineering.
Is code a billing?
IS Code 456 is an important code for Civil Engineering professionals and students. This Indian standards code was first published in the year 1953. Since then, It has been revised on many occasions in the year 1957, 1964, 1978 and 2000.
Is 1200 waterproofing measured?
11.6 The waterproofing treatment between laps of corrugated sheeting shall be fully described including the method of securing and measured in running metres stating the width. wood securing fillers, tying string and trimming to r-aves and verges. cutting and waste shall be included.
What are the items deducted from brickwork?
Rules for deductions to be made for openings in brick wall are as follows: No deductions are to be made for openings up to 0.1 square metre areas, ends of beams, rafter, purlins, etc., up to 0.05 square metre in areas and wall plate, bed plates, etc., up to 100 mm depth.
When opening in plastering is more than 3 sq m the deduction must be?
For openings exceeding 0.5 sq m but not exceeding 3 sq m and when both faces are plastered with same type of plaster each deduction shall be made for one face only, and the other face shall be allowed for jambs, soffits and sills which shall not be measured.
How many parts of is 1200?
Description : Being the complete set of all 28 parts of IS Code no. 1200.
Is 1200 Part 13 A method of measurement?
This part covering methods of measurement of white-washing, colour washing, distempering and painting applicable to building as well as civil engineering works was, therefore, issued as a second revision in 1970. The third revision of the standard was published in 1976 and the fourth revision in 1987.
Is 1200 flooring a measure?
This part covering method of measurement of paving and floor finishes applicable to building as well as civil engineering works was, therefore, issued as a second revision in 1971. The method of measurement of airfield pavements is covered in IS: 1200 ( Part xvu )-1969:.
How much cement is used in plaster?
Quantities of Cement, Sand and Water in Various Plaster Mix ratios
| Area (Sqm) | Plaster thickness (mm) | Cement (in Kgs) |
|---|---|---|
| 10 | 12 | 49.37 |
| 10 | 12 | 39.29 |
| 10 | 12 | 32.54 |
| 10 | 12 | 27.80 |
How many bags of cement are needed to plaster a room?
To plaster 1 room, you’ll need 6 bags of cement since you’ll need about 3 bags to plaster the internal walls.
How many bags of cement do I need to plaster a room?
We normally use the 1:4 ratio of cement and sand in mortar for plastering. That means, one unit cement will be mixed with four units of sand to prepare mortar. We know one bag cement of 50 kilograms contains 1.25 cubic feet of cement.
How do I calculate wall plastering?
Calculation of quantity of material for 12 mm thick plaster of ratio 1: 6 (1 Cement:6 Sand) in the wall for 100 Sqm
- Quantity of Cement = 2/(1+6) × 1 (1 Ratio of cement)
- In Kg = 0.30 × 1440 (Density of cement = 1440 kg/m3)
- Quantity of Sand = 2/(1+6) × 6 (6 Ratio of sand)
- In Cubic Feet = 63.558 cft (1 Cum = 35.31 cft)
Is Code 1200 a list?
IS 1200 1976 Part 12- Plastering and Pointing. IS 1200 1994 Part 13- Whitewashing, color washing, distempering and painting of building surfaces. IS 1200 (Part 15) 1987 Part 15- painting, polishing, varnishing etc. IS 1200 (Part 16) 1979 Part 16- laying of water and sewer lines including appurtenant items.
Is code a cement?
IS: 4031 – chemical analysis and tests on cement. IS: 456; 10262; SP 23 – codes for designing concrete mixes. IS: 1199 – methods of sampling and analysis of concrete. IS: 516BXB JWJJS– methods of test for strength of concrete.
Is 1200 mode of measurement for brickwork?
general brickwork and unless otherwise stated reinforcement shall be measured separately [see IS : 1200 (Part VIII )-1975* 1. 11.1 Brickwork above one brick in thickness shall be included with general brickwork; brickwork one brick and less in thickness shall be measured as described in 4.1. 1.
Which sentence is correct for rules for deduction in plastering?
No deductions shall be made for ends of joists, beams, posts, etc, and openings not exceeding 0.5m² each and no addition shall be made for reveals, jambs, soffits, sills, etc, of these openings nor for finish to plaster around ends of joists, beams, posts, etc.
Is 800 a steel?
IS 800 is an Indian Standard code of practice for general construction in steel. The earlier revision of this standard was done in year 1984 and the latest revision of 2007 was released on 22 February 2008. It is written for use in India.
How do you calculate plaster in a brick wall?
Mortar Calculation for Plastering work
- Density of Cement = 1440 kg/m3.
- Sand Density = 1450-1500 kg/m3.
- Density of Aggregate = 1450-1550 kg/m3
- How many KG in 1 bag of cement = 50kg.
- Cement quantity in litres in 1 bag of cement = 34.7 litres.
- 1 Bag of cement in cubic metres = 0.0347 cubic meter.
Is 1200 a measurement method?
This standard (Part 1 ) covers the method of measurement of earthwork in building and civil engineering works. Items may be clubbed together provided that the break-up of the clubbed items is agreed to be on the basis of the detailed description of the items stated in this standard.
What are the modes of measurement?
There are the three modes of measurement:
- Primary Measurement.
- Secondary Measurement.
- Tertiary Measurement.
