Table of Contents
What is the point of a broken view?
Broken views make it possible to display the drawing view in a larger scale on a smaller size drawing sheet. You create a gap or break in the view using a pair of break lines. Reference dimensions and model dimensions associated with the broken area reflect the actual model values.
How do you make a drawing into a part?
To create a drawing from within a part or assembly document: Click Make Drawing from Part/Assembly (Standard toolbar or New flyout menu). Select options for Sheet Format/Size, then click OK. Drag views from the View Palette into the drawing sheet, and set options in the PropertyManager.
How do I edit a broken view in Solidworks?
Right-click the broken view, and select Un-Break View. The break lines remain in the view and you can delete them. To modify a broken view: To change the shape of the break lines, right-click a break line and select a style from the shortcut menu.
How do you align break View in Solidworks?
To break a view’s alignment: Right-click inside the view boundary. Select Alignment > Break Alignment, or click Tools > Align Drawing View > Break Alignment. To break a view’s alignment while placing the view, press Ctrl as you place the view.
How do I use broken view in Creo?
Once a view is defined as broken, it can not be changed to another view type. Open a drawing with a general or a projection view. Double-click an existing view. Click the Visible Area category. Select Broken View from the View visibility list. Click to add a break to the view.
What is part drawing?
A component or part drawing is termed as a production drawing, if it facilities its manufacture. It is an authorized document to produce the component in the shop floor. It furnishes all dimensions, limits and special finishing. processes such as heat treatment, grinding, etc., in addition. to the material used.
What is an assembly drawing?
Assembly drawing is a presentation of a structure or product with its components connected together,in their relative working positions while in use. These components are fabricated separately, and are assembled or installed together at their utility sites such that each part fits and matches with the others.
How do I make a part from assembly sketch?
Creating a Part in an Assembly Click New Part (Assembly toolbar) or Insert > Component > New Part. Type a name for the new part in the Save As dialog box and click Save. Select a plane or planar face (while the pointer is ). Construct the part features, using the same techniques you use to build a part on its own.
What is a break view in Solidworks?
You can use a break (or interrupted) view in a drawing. Break views make it possible to display the drawing view in a larger scale on a smaller size drawing sheet. You create a gap or break in the view using a pair of break lines.
How do I get rid of break view?
First you right click the view and choose un-break view in the menu. You can then remove break lines by marking them and pressing Delete or move them as requiered. Then you right click the view and choose Break view.
What is a crop view in Solidworks?
A crop view focuses on a portion of a drawing view by hiding all but a defined area. The uncropped portion is enclosed using a sketch, usually a spline or other closed contour. You can crop any drawing view except a Detail View or a view from which a Detail View has been created.
How do you break section view from parents?
To align a break in a projected view with a break in the parent view: Right-click in the projected view and click Properties. In the dialog box, select Align breaks with parent. Click OK.
How do you split a parent and child in Solidworks?
In the FeatureManager design tree, right-click the top-level assembly, and click one or both of the Dynamic Reference Visualization (Parent) and Dynamic Reference Visualization (Child) options. Select a component that has external references. Click the circle and then click Break Reference .
How do you break out a section in Solidworks?
A broken-out section view cuts away a portion of an assembly in a drawing view to expose the inside.Broken-Out Section View on Section View In a section view, click Insert > Drawing View > Broken-out Section. Sketch a closed profile such as a spline. In the PropertyManager, set options. Click .
How do I create a partial section in Creo?
Partial views display geometry that exists inside of a sketched boundary. Open a drawing with one or more views. Double-click an existing view. Click the Visible Area category. Select Partial View from the View visibility list.
How do you make a cutaway view in Creo?
To create a cutaway, Click Annotation and then, in the Setup group, click the arrow next to Dep View. Click Cutaway. The Cutaway dialog opens. Click to complete the operation. Click Annotation and then, in the Setup group, click the arrow next to Dep View. Click Remove Cutaway.
What is a single part drawing?
Single-part drawings are workshop drawings that show the fabrication information for one part (usually without welds). Single-part drawings usually use small sheet sizes, for example, A4 or imperial standard size 8.5″ x 11.5″.
Are assembly drawings dimensioned?
Generally, the only dimensions shown on assembly and subassembly drawings are those needed to assemble the parts, standard components, and subassemblies. Thus, dimensions needed solely to fabricate a part should not be shown on assembly or subassembly drawings.
What type of drawing is used for working drawings?
They may include architectural drawings, structural drawings, civil drawings, mechanical drawings, electrical drawings, and so on. Traditionally, working drawings consist of two-dimensional orthogonal projections of the building or component they are describing, such as plans, sections and elevations.
What are the parts of assembly drawing?
Assembly drawings may include instructions, lists of the component parts, reference numbers, references to detail drawings or shop drawings, and specification information. However, they should not duplicate information provided elsewhere, as this can become contradictory and may cause confusion.
What are the three main parts of a set of working drawings?
Three main sets of production drawings include the following: Detail of each non-standard part on a drawing sheet, usually one part per sheet. Assembly drawing showing all parts on one sheet. A Bill of materials (BOM), essentially of each part.
What is design drawing?
n.An illustration of an object, chiefly through lines, that is intended to give sufficient information to allow the thing illustrated to be completed.
How do you create a part?
To create a part within an assembly: Click New Part (Assembly toolbar) or Insert > Component > New Part. For externally saved parts, type a name for the new part in the Save As dialog box and click Save. Select a plane or planar face (while the pointer is ).
How do you turn a sketch into a part in SolidWorks?
To import a drawing into a part document: Open the drawing (. dwg or . In the DXF/DWG Import dialog box, select Import to a new part and click Next. On the Drawing Layer Mapping tab, edit the sheet name and click Next. On the Document Settings tab, select Import this sheet and to a 2D sketch. Click Finish.
Can you extrude a sketch in an assembly?
You can create extruded and revolved cut features in assemblies. To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
