Table of Contents
Place the wax ring on the closet flange, not on the toilet. Pick up the toilet and set it evenly over the closet flange, making sure the bolts come through the bolt holes in the toilet base. Fine-tune the toilet position, so it’s right where you want it, then push it straight down so it smashes the wax evenly.
Should toilet flange be flush with floor?
When you install your toilet flange, it should be installed on top of the finished floor, and it should also be installed perfectly level. If your flange sits even or below the floor, then it’s wrong. It has to sit evenly on top of the finished floor.
How do I know if my wax ring is sealed?
The first sign of a failing wax ring is water that seems to be seeping out of the base of your toilet.Signs Your Wax Ring is Bad Water stains on the ceiling from the floor below. A lingering, unpleasant bathroom odor from escaped sewer gasses. Wobbling toilet.
Is there something better than a wax ring?
Why Better Than Wax? This innovative wax-free toilet seal fits any drain, any toilet, can be repositioned during installation, and excessive plunging won’t cause leaks. Better Than Wax includes a stackable wax-free seal, slide-on spacer, and no rust brass bolts and hardware.
Can you use 2 wax rings when installing a toilet?
You can certainly install a toilet with multiple wax rings, in fact sometimes it is necessary to make sure you don’t have a leak. You can buy an extra-thick wax ring, or you can just buy two rings and stack one on top of the other.
When should you use an extra thick wax ring?
If your flange is floor level or slightly below then you can use an extra-thick wax ring. If the flange is lower than a 1/4” below the floor level then you should use a flange extension to raise the flange height or remove and replace the old floor flange and set it to the right height.
How long does it take to replace a toilet wax ring?
A straight toilet retrofit takes approximately four to six hours. If you have to repair the flange, however, you could spend the entire day working on the toilet. The bathroom will probably be out of commission for several days if you need to do subfloor repair.
Do I need to remove old wax ring?
If you have to remove your toilet for any reason, you should plan to replace your wax ring. Lifting the toilet will break the seal and if the wax is old, it may not reseal. Sagging or soft spots on the bathroom floor near your toilet could also point to water damage.
What do you do if the toilet flange is higher than the floor?
The last option when your flange is too high is to replace it. You’ll need to remove your old flange and the fitting from the pipe coming up from your bathroom floor to do this. Start by removing your toilet and breaking the outer flange portion off. You can use a hammer and a chisel.
How high should a toilet flange be above the finished floor?
Check the Flange Height Optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.
Can toilet flange be lower than floor?
In a typical toilet installation, the floor flange that sits inside the drain opening below the toilet should be positioned so that its bottom surface rests flush against the finished floor or no more than 1/4 inch above or below the floor.
Should you caulk around toilet base?
Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.
What does a bad wax ring look like?
But sometimes wax rings can dry out, crumble, and fail prematurely. When that happens, they need to be replaced. The telltale sign of wax ring failure is water leaking out from around the base of the toilet. You might also notice a toilet feeling unusually wobbly if the wax ring is coming loose.
What causes a wax ring to fail?
One very common cause of wax ring problems is loose toilets. If the toilet is not firmly mounted, or gets loose to the point where it rocks a bit, it can cause the wax ring to lose its seal. When installed, a wax ring is compressed to fit the flange and the toilet, creating the seal.
Which is better toilet wax ring or rubber?
Using a wax-free seal makes clean up easier and there’s less room for error. If you need to remove the toilet base with a wax ring, you’ll need to purchase another ring to reinstall the toilet. When you use a wax-free seal, it’s reusable as long as it’s in good condition.
Can you reuse wax seal toilet?
Toilet Removal The old one cannot be reused. If a toilet needs to be lifted in order to remove an object from the toilet or provide access to a clogged drain, the wax seal will need to be replaced.
What causes water leak around base of toilet?
Why is the toilet is leaking from the base? The leak is usually caused when the seal under the toilet fails. Wait until a new puddle appears on the floor, then check to make sure the water is seeping out from under the toilet and not coming from a loose supply tube, faulty shutoff valve, cracked tank or sweaty bowl.
Are there different sizes of wax rings for toilets?
Wax rings come in two diameters, 3 inches and 4 inches, because — as you might expect — those are the two standard sizes for toilet waste openings. Besides diameter, thickness is also an important parameter when it comes to wax rings. Again, there are two possibilities: regular and extra thick.
Should you tile around or under a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first. The floor will be sealed a lot better with the tiles being laid under the toilet. 2. It is also easier to do this rather than trying to cut tiles around the toilet.
