Table of Contents
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
How long after adding algaecide can I add shock?
It’s important to know that using pool shock and algaecide together can create bad chemical reactions if you don’t take the necessary precautions. Your chlorine levels won’t return to normal right after you shock your pool anyway, so we recommend waiting at least 24 hours to add algaecide.
When should I add algaecide to my pool?
Algaecide should be added to your pool water on a weekly basis. Preventing algae is the key to fun in your pool. Algaecides act as a backup to your normal sanitization program and prevent algae from starting and growing in the pool. Algaecide should be added after every shock treatment.
How do I make my pool water crystal clear?
So the best way to have a crystal clear pool is prevention. Keep the chemical levels within the ideal ranges. Check the flow meter to be sure the pool is circulating water at a proper flow rate. Brush the walls and floor weekly. Keep a preventative amount of algaecide in the pool.
Should I shock my pool when I first fill it up?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
What should be adjusted first alkalinity or pH?
You should test alkalinity first because it will buffer pH. Your reading should be in the range of 80 to 120 parts per million (ppm). If you need to increase the alkalinity, add an increaser. To lower it, you’ll add a sodium bisulfate.
Is it OK to add shock and algaecide at the same time?
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
What chemicals do you put in a pool first?
Chemicals Needed for Pool Start Ups Stain & Scale Preventer. Granular Shock Chlorine. Chlorine Tablets. pH Increaser and/or pH Decreaser. Alkalinity and/or Calcium Increaser. Cyanuric Acid (Stabilizer) Algaecide and Clarifiers if needed. Complete Test Kit or Test Strips.
Why is my pool still green after shock and algaecide?
When shock chlorine oxidizes the copper, it turns green and that’s what you’re seeing in the pool. To get rid of it you’ll need to raise the pool’s calcium hardness by adding calcium chloride. The other culprit can be high levels of pollen.
What happens if you put too much shock in your pool?
Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.
How long does it take algaecide to work in pool?
How long does it take for algaecide to work? Algaecide acts in the pool for five to seven days. Watch your pool for several days, and run the pump regularly to see if the mold comes back. After five-seven days, you can re-add the amount of algaecide you need for your pool to complete the algae removal process.
What happens if you put too much algaecide in your pool?
The presence of too much algaecide can lead to a foamy pool water. Air pockets within the filter system can cause bubbles on the pool surface as well. The bubbles and foam resulting from too much algaecide will be much smaller in size.
Can you over shock a pool?
Can you put too much shock in a pool? SKIMMER NOTES: It’s unlikely but it could happen. It would take a lot of shock to really make the water unsafe for swimming. The best way to make sure you’re safe to swim is to test your pool water and make sure free chlorine levels are between 1-4ppm for healthy swimming.
Can I add algaecide and pH up at the same time?
Shocking your pool and adding an algaecide to the water are two ways to get rid of the sickly green color caused by algae growth, but you shouldn’t do these things at the same time. The product will have a tougher time working when it’s saturated in the water.
Is shock and chlorine the same thing?
1) What is the difference between chlorine and shock? Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
How can I make my green pool clear faster?
Follow the below steps to clear up your green pool in 24 hours: Test the pool water. Balance your chemicals and PH accordingly. Remove any debris. Shock the pool. Brush the pool. Vacuum the pool. Run the pump for continually for 24 hours.
How do I get rid of algae in my pool fast?
How Do I Get Rid of Algae In My Pool FAST? Vacuum Your Pool Manually. Automatic or robotic pool cleaners aren’t well suited to cleaning algae. Brush Your Pool Walls and Floor. Test and Balance the Water. Shock Your Swimming Pool. Filter Out The Pool Algae. Test Your Pool Water Again. Clean Your Pool Filter.
How long after adding pH up can you add shock?
Most balancing chemicals, such as pH, alkalinity, and calcium hardness, will become incorporated into the water within an hour of adding them, at which time swimming is safe. Shock takes longer to adjust with the pool water, so waiting overnight after shocking before you swim is recommended.
