Table of Contents
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. The use of all pulls is a more contemporary look but is also seen in more traditional kitchens with a more traditional pull style.
Can drawers have knobs?
Yes, you can put knobs onto your kitchen drawers! The installation process is very easy, and many individuals even prefer it over installing traditional pull handles. The trickiest part might be deciding where to place the knobs on the drawers and placing them in the same spot on every drawer.
What is the difference between a knob and a pull?
What is the difference between a knob and a pull? A knob requires one fastener or screw. A pull requires two fasteners or screws.
What are handles on drawers called?
A drawer pull (wire pull or simply pull) is a handle to pull a drawer out of a chest of drawers, cabinet or other furniture piece.
Can you replace drawer pulls with knobs?
Switching out the pulls, handles, or knobs of your drawers is one of the easiest home upgrades in the book — you simply have to unscrew the old ones and replace them — and the impact is immediate. This quick fix also works wonderfully to visually unify any mismatched furniture.
Where do knobs go on cabinet drawers?
Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
Do pulls go on drawers or doors?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
Are knobs for drawers or cabinets?
The general rule of thumb is that knobs are best for cabinet doors, though occasionally you can break the rules. “We might do a single knob on a smaller drawer,” says Gorsline.
Can you put pulls on cabinet doors?
Yes! For a cohesive look, pick matching finishes and install the same kind of hardware on drawers versus cabinet doors. If you want to mix and match pulls and knobs in your kitchen, opt for pulls on drawers and knobs on doors. This creates a pretty aesthetic and makes opening your cabinets comfortable.
What are the parts of a drawer pull called?
Glossary of Terms Bail. The hanging brass handle itself that swings on a drawer pull. Bail Pull. A drawer pull with a bail handle which swings from the two posts. Back Plate. The circular or curved brass plate that sits against the wood. Boring. The center to center distance between the posts of a drawer pull. Escutcheon.
What is the handle on a cabinet called?
Cabinet knobs are mounted to the exterior of the cabinet door panel and are a simple, easy to install option for opening and closing your doors. They are most commonly used on cabinets fronts, but they can also work for small drawers.
What do you call handles on cupboards?
Nevertheless, cabinet handles, also called cabinet pulls, and their near kin, cabinet knobs, can make a big difference in the look and utility of your kitchen.
Can I replace cabinet knobs with handles?
Replacing knobs with handles is a quick way to update a kitchen while making it more comfortable and convenient to use. Low end cabinet handles can be priced as low as $1 each. High end handles range between $15 to $20 a piece.
Can you change cabinet handles to knobs?
But if you’re going to switch knobs to handles or pulls, then it can get a little more complicated (still pretty easy, though). Knobs only require one hole and handles require two. The last thing you want is an ugly hole right behind your beautiful new cabinets.
Can you replace knobs with handles?
Most older kitchen cabinets have knobs (one hole) to open them. Replacing these knobs with modern handles is a great way to change the appearance of your cabinets for next to nothing. The only issue is you now have a hole from the old knob in the cabinet. You can buy cabinet hardware handles in bulk and save money.
How do you put hardware on a dresser?
How To Replace Old Furniture Hardware With New Drawer Pulls Prepare the furniture for painting. Remove the original hardware. Drill a hole for the new hardware. Protect the inside of the drawer. Fill old hardware screw holes with wood filler. Sand the wood filler. Paint the furniture.
Where do handles go on Shaker doors?
For 5-piece cabinets (like a Shaker or any style that isn’t one flat slab of wood), the traditional placement is to center the knob in the corner of the face frame, so that the knob is in the center of both the vertical and horizontal frame pieces.
Where do knobs and pulls go on Shaker cabinets?
Center of the Stile: Knobs and pulls can be placed halfway up the stile of your Shaker door. Keep in mind you’ll want to be able to reach the handles, since they will be placed higher up along the stile. Just Above or Below the Corners: Place the knobs or pulls 2” to 3” from the lower or upper corner.
What handles go with Shaker cabinets?
The simplest way to adorn your Shaker cabinetry is to use only knobs on all the cabinet doors and drawers. To achieve a classic or vintage look, circular glass or ceramic knobs are most appropriate.
Are knobs or pulls better?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
Where do pulls go on cabinet doors?
For pulls (having two screws) on upper cabinets, the pull should be centered horizontally on the door stile and the bottom hole should be placed 2-1/2” up from the bottom of the door. For lower cabinets the upper hole should be placed vertically, 2-1/2” down from the top of the door.
Can you mix knobs and pulls in a kitchen?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
