Table of Contents
Tips for Architecture School In a portfolio, scale doesn’t matter. Just make sure you are mindful of placement, alignment, and hierarchy of the drawings and you will be fine. Size does matter, but the measured scale does not need to be true in the portfolio due to its smaller size.
Are architectural drawings to scale?
Architectural plans are drawn to all different scales, ranging from the simple (1 inch = 1 foot) to the complex (3/16 inch = 1 foot). Plans are often drawn at 3/4, 3/16, 1/8, and other scales (in each case the dimension in inches here corresponds to one foot).
What is the standard scale for architectural drawings?
Architect scales, such as 1/4˝ = 1´-0˝ (1/48 size) or 1/8˝ = 1´-0˝ (1/96 size), are used for structures and buildings. They are used to measure interior and exterior dimensions such as rooms, walls, doors, windows, and fire protection system details. Other scale tools include flat scales and rolling scales.
What format should Architecture portfolio be?
When applying for an employment position, most architectural practices will firstly ask for a sample portfolio to be sent with your C.V/resume. This should consist of two to five A3 or A4 pages (three is preferred), and be a very careful selection of your best and most relevant work.
Which scale is most likely used for architectural drawings?
The architect’s scale is used by architects and builders for obtaining measurements from scaled drawings of buildings and other structures. It is typically three-sided with 11 scales or flat with 4 scales. It is available in lengths ranging from 4″ to 36″ although 12″ models are most common.
How do you scale architectural drawings?
To convert an architectural drawing scale to a scale factor: Select the desired scale. 1/8″ = 1′-0″ Invert the fraction and multiply by 12. 8/1 x 12 = Scale Factor 96.
How many scales are on an architect’s scale?
For accuracy and longevity, the material used should be dimensionally stable and durable. Scales were traditionally made of wood, but today they are usually made of rigid plastic or aluminum. Architect’s scales may be flat, with 4 scales, or have asymmetric 3-lobed cross-section, with 6 or 12 scales.
What are three types of scale in architecture?
Typically, architecture deals with different types of scale: Human scale: The human interaction with environments based on physical dimensions, capabilities and limits. Intimate scale: This is a smaller, more personal scale.
What are architectural drawings called?
Prints of architectural drawings are still sometimes called blueprints, after one of the early processes which produced a white line on blue paper.
What should be in an architecture portfolio?
Portfolios may be submitted in either paper or electronic format and should include the following: Applicant’s name and contact information. Table of contents. A description of the applicant’s individual contribution to any group or professional design projects. Academic, personal, and/or professional projects.
How do I make my architecture portfolio stand out?
10 Architecture Portfolio Tips: Listen to the audience. PDF or Online portfolio, Which one is better for you? Create an appealing CV page. Select your best projects. Less is more. Include team projects, it’s important! Pay attention to fonts and grammar. Use your drawing skills.
How many projects should an architecture portfolio have?
On average, you shouldn’t have more than five projects if you can help it because too many could cause your audience to lose focus.
What is the importance of scale in architectural drawing?
Scale allows us to understand the relationship between a representation – a drawing or model – and reality. Being able to draw accurately to scale, and to shift fluidly between scales, is one of the most important aspects of architectural drawing and spatial design.
Is an architect scale the same as an engineer scale?
Although similar in appearance to an architect’s scale, the engineering scale is designed to be more precise and has a decimal scaling scheme whereas an architect’s scale uses fractional scaling. It is designed to only be read from left to right. An architect’s scale can be read from either the left or right side.
Is the scale 1/25 an architectural scale or an engineering scale?
Engineering scales are read left to right, and should have scales of 1:20, 1:25, 1:50, 1:75, 1:100 and 1:125. Architectural scales can be read both left to right, and right to left, and are likely to be labeled with 3/32, 3/16, 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1-1/2, 3 and 16 scales.
How does an architect scale work?
An Architect’s or scale ruler is designed for use in determining the actual dimensions of a distance on a scaled drawing. For example, 1/8 on the ruler is in fact a scale that converts 1/8 inch on the drawing to 1 foot. This would represent a drawing with a scale of 1/8″ = 1 foot.
How do you work out scale drawings?
The scale is shown as the length in the drawing, then a colon (“:”), then the matching length on the real thing. Example: this drawing has a scale of “1:10”, so anything drawn with the size of “1” would have a size of “10” in the real world, so a measurement of 150mm on the drawing would be 1500mm on the real horse.
What is the purpose of scale drawings and plans?
Scale drawings are a useful tool for any designer, because they can be used to plan, visualize and adjust landscape plans before breaking ground. Scale drawings assign each object the same scale compared to the actual objects.
What is architectural scale mean?
: a scale of rule usually of triangular section made of boxwood and having a variety of graduations on its edges, one edge usually being graduated in inches and sixteenths of an inch, the other edges graduated in twelfths and fractions thereof for lengths of 3 inches, 1¹/₂ inches, and 1 inch so that dimensions of.
How do you convert an architectural scale?
To convert a measurement to a larger measurement, simply multiply the real measurement by the scale factor. For example, if the scale factor is 1:8 and the measured length is 4, multiply 4 × 8 = 32 to convert.
What is scale in engineering drawing?
Definition. A scale is defined as the ratio of the linear dimensions of the object as represented in a drawing to the actual dimensions of the same.
