Table of Contents
No, there isn’t a standard size for all toilet seats, due to a variety of toilet styles. There are key measurements that you will need, even though most seats are adjustable to fit the most common toilet bowl shapes. The measurements are: The distance between the fixing holes – where the screws are.
Are all toilets interchangeable?
As far as the overall size of toilet itself, getting the proper rough will allow the toilet to fit the space. Toilet sizes vary beyond the rough though. Round bowls don’t project out as much as elongated, and then there are variations within the round and elongated categories as well.
How do I know what size toilet I need?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
Are toilets universal fit?
The first step is to measure carefully to ensure that the toilet you purchase will fit in the same location as the old one. If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
Are all toilet toilets the same size?
Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
Can an elongated toilet replace a round toilet?
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.
Can you mix and match toilet bowls and tanks?
There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.
How do I know if a new toilet will fit?
Be sure to measure from the wall and not from the baseboard. Also, measure to any nearby water supply lines on the floor. Some toilets have a wider base that might not fit next to a supply line on the floor. It’s a good idea to measure from the bowl to a sidewall to be sure that the toilet will fit in your space.
What should I look for when buying a toilet?
While there are many features to consider when buying a toilet, including height, bowl shape, color, style, and flushing technology, most toilets fall into one of two basic types: gravity-feed and pressure-assisted. Gravity-feed toilets dominate the market, but pressure-assisted models are worth a look.
What’s the standard size of a bathroom?
What is the average size bathroom? An average sized bathroom is anywhere between 36-40 square feet for an apartment or small home. This size is the general size as it encompasses both ¾ baths as well as full baths, giving you just about enough room for a shower, a bath, a sink and a toilet.
How much should it cost to have a toilet installed?
Toilet installation costs around $372, with most people paying between $224 and $531 for a full toilet replacement, depending on the type of toilet and the difficulty of the job. This includes the cost of the toilet, labor and equipment needed for the installation.
How do I know the rough-in size of my toilet?
The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).
What is toilet pack size?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.
Are all toilet tanks standard size?
Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size.
How easy is it to replace a toilet?
Replacing and installing a new toilet isn’t as hard as it may sound. All you need are a few hours, a helper and the right tools and toilet parts for the job.
Is it safe to leave a toilet off overnight?
Yes, absolutely, fumes can be harmful when replacing a toilet, but they can be kept at a minimum and shouldn’t pose a health risk if you work reasonably quickly and keep the drainpipe covered between removal and installation.
Which toilet is better round or elongated?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
Which is better 1 or 2 piece toilet?
Performance-wise, there is no difference between the one-piece and two-piece toilets. They can have the same flushing power and efficiency. The interior parts are almost identical if they are from the same manufacturer. They may even have the same features and specifications.
