Table of Contents
Why does my phantom 4 lose signal?
DJI Answer – Make sure you have the antenna correctly positioned. Make sure you have wifi off on the device you are using as ur eyes. Make sure you are on the latest firmware etc. Real Answer – Its not supposed to happen, but it seems to be happening to a lot of people.
How do I reset my phantom 4 drone?
In the DJI Assistant 2 app, select your drone under Connected Devices. Below the Firmware List click Restore Factory Defaults. Click Confirm to start the factory reset process. Click Complete.
How do I reset my DJI Phantom?
Using DJI Assistant 2 (get the latest version) and it will allow a refresh or a reset to Factory Defaults. If that is not possible with the Remote Controller, you can try to touch the Icon in the upper right corner of the white Splash screen for over 5 seconds. It will open a reset and roll-back options.
Why does my drone keep losing signal?
Your drone may be losing its connection because there has been an interruption with the signal. Something has caused a disconnection between the controller and the drone. Here are the most common reasons for loss of connection; Drone, batteries and controller are not updated.
What causes drone to lose signal?
Reasons Why a Drone May Lose Connection: Signal loss is between the drone and the remote controller. It is distance-related and happens if the drone goes beyond the distance that the remote controller signal can maintain. Also, it could result from magnetic interference from the neighboring areas.
Why is my drone not connecting?
In Case the connection can not be established with the drone, ensure that: The drone manufacturer’s app is not running in the background. Force quit if necessary: (Android, iOS) How to force quit an app. The USB cable is properly plugged between the remote controller and the mobile device.
How do I reset my drone to factory settings?
Press and hold the drone’s power button for 9 secs. Open the DJI Assistant program. Make sure to have Firmware Update (1) selected, and then click on RESTORE FACTORY DEFAULTS (2). There will be a confirmation screen, click on CONFIRM. When it is done, click on COMPLETE.
How do I reset my phantom 4 Pro?
Double tap the power button on the battery.
How do I connect my phantom 4 to my phone?
If you’re using a smartphone, unfold the supporting arms (3) as well. Place your mobile device into the holder and secure it by pressing down the clamp. Plug the small end of the provided USB cable into your mobile device. Then plug the other end of the same cable into the USB port on the rear of the remote control.
Does the Phantom 4 RTK have active track?
Active Track is one of the new features available on the Phantom 4. It allows you to track subjects automatically (without using a GPS reference) by using advanced image recognition algorithms.
How do I get rid of phantom 4 RTK?
To remove the Intelligent Battery, open the cover, press and hold the battery release button, then push the battery downward. Phillips screws, then close the protectors. The Phantom 4 RTK remote controller can access the Internet using a 4G dongle with SIM card or Wi-Fi signal.
How do I reset my DJI Mavic air?
On the remote control, press and release the power button then press it again quickly and hold it until you hear it make the initialization sound. In the DJI Assistant 2 app, select your remote control under Connected Devices. Below the Firmware List click Restore Factory Defaults.
How do I reset my DJI remote?
– “reset the RC: * Turn on the controller, the aircraft should be off. * Press C1, C2, and shutter (top right button nearest antenna) on the controller and hold for about 2 seconds or so until it beeps (D-DDD), then turn the controller off.”Oct 31, 2020.
What happens when your drone loses connection?
Your aircraft will automatically cancel the flight mission if it loses connection for several seconds. Then it will perform Remote-Controller-Signal-Lost action, which is set to RTH by default. You can cancel RTH by pressing the RTH button on your remote controller after your aircraft is connected again.
What happens if DJI drone loses GPS signal?
When the signal is lost the drone will enter a failsafe mode which is either hover, land or RTH depending on your setting within the app – this is subject to the home point being set on the map prior to take off and a strong GPS connection at the point of signal loss.
How do you fix a weak RTK signal?
Weak RTK signal- turn RTK off, take-off, turn RTK back on. This will let you take off then it will get correction if it can.
How do I find my lost drone?
7 Clever Ways to Find A Lost Drone Without a Tracker Before Searching For Your Drone, Hit The “Return To Home” Button! Find Drone With The Remote Controller. Use The DJI “Find My Drone” Feature. Use “Flight logs” In Your Drone App. No Flight Logs, No Controller Connection? Lost Drone Posters. Check The Online Market Place.
Do you have to calibrate a drone every time?
Calibration is also needed if your drone has been flying inconsistently or not flying like it usually does. Many experts believe that a drone needs calibrating each time that it operates, especially if it will be flying in a new location.
How do I reset my drone WiFi?
Press and hold the Spark’s power button until the drone beeps once, twice, and then three times (9-10 seconds). This resets the Spark’s WiFi network.
Why is my drone not connecting to WiFi?
If your drone has a WiFi switch on board, try toggling it off and back on. If your drone’s WiFi network is not showing up on your phone, try turning your drone off and back on again. If you are having trouble connecting your drone’s WiFi, try “forgetting” the network or restarting your phone.
Why won’t my DJI drone connect?
Here are the most common reasons why your drone won’t connect to the controller: The battery power might be too low on the drone or the controller. It could be an issue with the software on the remote controller. The problem could be with the application used to connect the drone.
