Table of Contents
A vehicle’s check engine light illuminates whenever there is a malfunction. If the check engine light happened to be flashing during these episodes of acceleration, that means there is a serious fault, such as cylinder misfiring, that requires immediate repair.
What is the most common reason for check engine light?
Replacing a faulty oxygen sensor — a sensor used to optimize a vehicle’s fuel-to-air mixture to increase gas mileage and reduce emissions — is the most common cause for a check engine light.
Why does my check engine light come on when I press the gas pedal?
This may be a sign of a failing throttle position sensor. Based upon the inputs from the sensor reading your foot’s position on the pedal, the ECU then makes the direction to supply more or less fuel to the motor.
Will your engine light come on if your car hesitates when accelerating?
When a mass airflow sensor begins to fail, it will typically generate an error code or “Check Engine light.” This warning may be accompanied by hesitation while accelerating, or while driving up a hill. A vehicle with a failing mass airflow sensor may also stall soon after starting.
Is it safe to drive with check engine light on?
Can you drive a car with the engine light on? It’s okay to drive for a few miles, but be sure to schedule an inspection of the engine as soon as possible. If the check engine light comes on while you’re driving, don’t panic! Just be sure to have your car inspected as soon as possible after the light turns on.
Why is my engine light on but nothing seems wrong?
Normally, the appearance of a check engine light indicates a problem somewhere in your vehicle, but nothing seems amiss. The problem can even be as simple as forgetting to tighten your gas cap – in fact, this is the most common reason why check engine lights appear in the first place.
How do you know if your gas cap is loose?
The check engine light should go off after you drive for several minutes if the light was caused by a loose gas cap. Pay attention to the dashboard after the check engine light experience. If you find that the light keeps coming on, and goes off again once you tighten the gas cap, then your gas cap is too loose.
Why is my car revving when accelerating?
When the transmission develops a leak and fluid levels fall, a vehicle will begin to rev at higher levels as a result of the gearbox band or torque converter slipping. The vehicle may also experience irregular or delayed gear shifting. A manual vehicle experiencing this difficulty may be related to a slipping clutch.
Why is my car having trouble accelerating?
If your car is not accelerating properly, check the air filter. The air filter traps dirt, debris and other impurities to keep them from entering the combustion chamber. A clogged air filter starves an engine of much-needed air, skewing the air/fuel mixture that affects acceleration.
What does a solid yellow check engine light mean?
The steady yellow light is telling you to take a look and fix the minor issue as soon as you can, but it’s not usually serious. The flashing light means that your vehicle’s engine is misfiring and you should investigate the problem immediately.
What does a solid check engine light mean?
A solid Check Engine Light can mean something like a loose gas cap, or it can indicate a more in-depth problem like a fuel, timing, or transmission issue. Get your car diagnosed, although the urgency isn’t the same as if the light was flashing at you.
Can AutoZone check engine light?
Does AutoZone Scan Check Engine Lights? AutoZone can diagnose Check Engine Light codes, yes. If your engine light turned on and you are wondering why, head down to your local AutoZone where one of our store associates can help diagnose the issue through our free Fix Finder service.
When should I be worried about check engine light?
Unlike a Temperature or Oil Pressure light, a Check Engine light is usually not an urgent, “Stop right now or you may cause permanent damage!” type of situation, unless it is flashing. If your gas cap is loose or the seal is not tight, the vapor leakage can cause your fuel system to trigger the check engine light.
Is a solid check engine light serious?
Both a solid and flashing engine check light indicates that a problem has been detected. However, a flashing engine check light indicates that it is a serious problem that requires your immediate attention. A flashing light conveys an urgent issue that needs to be taken care of right away.
Can I reset check engine light myself?
Turning the Ignition On and Off The on-off method is the equivalent fix for a vehicle’s check engine light. It forces the computer to refresh its saved state through a reboot. Simply place your key into the ignition and turn it on for 1-2 seconds, then turn it off for 1-2 seconds. Repeat this step three or four times.
How many times should you click your gas cap?
Many manufacturers recommend tightening the fuel cap until it clicks three times, which is just a random number to make sure the cap is tight.
Will check engine light go off after tightening gas cap?
As soon as it’s safe, pull over and make sure your gas cap is tight. Once you’re back on the road, your check engine light should go off within 10 or 20 miles.
How do I know if I need a new gas cap?
One of the most common symptoms of an issue with the gas cap is a cap that does not tighten properly. Most gas caps are designed to click once they are tightened sufficiently. If the cap does not click, or clicks and then pops loose again then that may be a sign that it may need to be replaced.
