Table of Contents
How do you show the center mark in Creo drawing?
To create single or double slot center lines, Click Annotation and then, in the Annotate group, click the arrow next to Cen Line. Click Slot Single or Slot Double. Select an arc or a circle for which you want to create the center line. Continue creating slot center lines or click to complete the operation.
How do I create a reference line in Creo?
To create a reference line, Click Annotation and then, in the Annotate group, click the arrow next to Ref Line. Click Create Ref Line. Click the text or symbol in the drawing from which the reference line is to originate.
How do you move views in Creo?
To move the view freely on the drawing, you must unlock it. Select and right-click the view, and click Lock View Movement. All views in the drawing, including the selected view, are unlocked. If you accidentally move a view, you can press ESC while the move is in progress to snap the view back to its original position.
How do you show symmetry in Creo?
On the Annotate tab, click Symmetry Line Axis. 2. Select two axes that are perpendicular (normal) to the plane of the screen (shown as cross hairs). To extend the symmetry line to either side, grab a handle of the axis with the mouse pointer and click anywhere outside of the line.
How do you show PCD?
The easiest way to calculate the PCD is as follows: Identify the size of the rim or tyre size. Measure the distance ‘S’ between two adjacent studs from the centre of each hole. Using the calculator enter the number of studs/holes & ‘S’ and press ‘calculate’.
Where is the graphics toolbar in Creo?
Graphics Toolbar—The Graphics toolbar is embedded at the top of the graphics window. The buttons on the toolbar control the display of graphics. You can hide or display the buttons on the toolbar. You can change the location of the toolbar by right-clicking and choosing a location from the shortcut menu.
How do you hide a feature in Creo?
Hide or Show a Feature or Component in the Graphics Area Right-click a feature or component in the graphics area. Click the Hide/Show icon, which looks like an eye, in the quick access task bar.
How do I change a sketch reference in Creo?
Click Sketch > References. The References dialog box opens. Select a reference to replace from the references list on the References dialog box. Click Replace. Select a new reference in one of the following ways: ◦ In the graphics window. If there are missing or failed references, click Solve. Click Close.
What is a reference in Creo?
Fundamentals > Creo Parametric User Interface > The Tools Tab > Getting Information > Investigating References > Feature References. Feature References. Feature references are the dependencies between different features in a design. They are created in the context of a single part, or in the context of an assembly.
How do I change my reference point in Creo?
Select a surface. Click Restyle > Edit > Reference Point Setup. The Reference Points dialog box opens. Click Add Ref Points to add references. To specify reference points, select an option from the list. To remove reference points, click Rmv Ref Points and select an option from the list.
How do you move the camera on Creo Parametric?
Use the shortcut: Ctrl+middle (or left+right) mouse and drag the model in the direction you wish to rotate. 1. Click 3D Access and, in the Viewing group, click Rotate. 2.
How do you draw a symmetrical axis?
1 Answers Draw a line segment AB of length 7.3 cm. Now, take A as centre and draw a circle by using the compass. The radius of the circle should be more that half of the length of the AB. With the same radius, draw another circle using compass taking B as centre. Now, join CD. So, CD is the axis of symmetry.
What is horizontal line symmetry?
A horizontal line of symmetry is that line that runs across the image thus dividing into two identical halves. This line may also be called a sleeping straight line that parts an image or shape into identical halves.
What is PCD in drawing?
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes.
What is ET wheel?
ET stands for einpresstiefe, or for those whose German isn’t up to scratch, insertion depth. This is a number stamped on the rear spokes or mounting face of an alloy wheel. The ET of a wheel is the measurement in mm of how far the wheel’s centre line is from its mounting face.
How do you show a bolt circle in Creo?
To draw a bolt circle, Click Annotation and then, in the Annotate group, click the arrow next to Cen Line. Click Bolt Circle. The Bolt Circle dialog box opens. In the Mode box, select one of the following: ◦ Cen Lines to create a regular bolt circle. Select three center lines. Click .
How do I use View Manager in Creo?
On the View tab, click the arrow next to Manage Views and then click View Manager. Click Orient. Click New. Right-click the new view name and click Redefine on the shortcut menu. Orient the model by references or position the model to the desired view using the spin, pan, and zoom commands.
How do you reorient an assembly in Creo?
In an open assembly, click Assemble. Select the component to be placed and click Open. Click Move. Select Translate or Rotate from the Motion Type list. Click one of the following options and then follow the appropriate steps: Continue to adjust placement as required. To stop movement, click in the graphics window.
Where are the hidden parts in Creo?
To display the hidden items, select the item that you want to display, and use one of the following methods: On the Layer Tree, under Hidden Items, right-click and select Show. On the Model Tree, select the item, and click Show , or click View > Visibility. Click the Show list and click Show.
