Table of Contents
How do I identify drawer pulls?
To measure drawer pulls, you must determine three measurements: length, center-to-center distance, and projection/depth. With knobs, focus on projection/depth measurements, since most knobs will not be particularly tall or wide.
What can I use instead of drawer pulls?
Plastic toys from the dollar store or thrift shop are great pieces to start with. The plastic is softer and very forgiving if you end up needing to take a few tries to get the hole drilled out. They are somewhat large for your basic door knob or drawer pull, but could work on the right piece.
What is the most common type of drawer pull?
Bar Pulls – These tend to be the most common type of pull we see. They work well on most styles of cabinet door, from shaker to more contemporary, because there are almost endless varieties, sizes, and styles available.
What are the different types of drawer pulls?
Cup/Pin Pulls. Handle/Bar Pulls. Bail Pulls. Finger Pulls. Appliance Pulls. Drop/Hanging Pulls.
How do you date an old chest of drawers?
If the handles are original it will give a very good indication of the age of the chest. A pear drop handle will suggest the chest will be William and Mary or Queen Anne period whereas a swan neck handle would be found on pieces that post date 1750. Drawer mouldings will also give an indication of the age of the chest.
How do you pull a ceramic drawer?
I have been coveting all the beautiful painted porcelain and ceramic drawer pulls and knobs that are around at places like Anthropologie. I wanted to update an old Ikea unit with some, but having 8 drawers, it was going to cost me nearly £50! Eeeps. So I came up with this DIY version for less than £8!.
What are standard drawer pull sizes?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another).
Do you put pulls on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Which is better knobs or pulls?
Determine If You Want a Knob or Pull One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull. It is much more comfortable to open a drawer using a pull.
How do you measure for cabinet pulls?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
What is considered kitchen hardware?
The kitchen hardware holds significant weight towards shaping the design of the room. From brass door knobs to chrome cabinet handles, elegant kitchen hardware polishes the room with subtle details. We have an extensive collection of kitchen door knobs, cabinets pulls, decorative handles and more.
What is center to center measurement for cabinet pulls?
The Center-to-Center of any drawer pull is the distance between the center of one screw hole to the center of the other. Measuring the center-to-center of the drawer pull is key in determining what new hardware will fit and whether you’ll need to drill new mounting holes or fit into existing ones.
What size are drawer pull screws?
Standard #8-32 machine screw, used for drawer front knobs and pulls. Different length screws used for installing pulls and knobs.
How can you tell how old a wooden chest is?
Look carefully at the bottom, sides, and back of the drawer; if the wood shows nicks or cuts, it was probably cut with a plane, a spokeshave, or a drawknife. Straight saw marks also indicate an old piece. If the wood shows circular or arc-shaped marks, it was cut by a circular saw, not in use until about 1860.
What age does furniture become vintage?
Most antique dealers consider an item to be vintage if it is at least 40 years old.
How do you find out what your furniture is worth?
Contact a major auction house, such as Sotheby’s or Christie’s, for value lookups on extremely rare or valuable antique furniture. Check websites such as Antique Trader where information of events offering free antique appraisal information is posted.
Where do knobs go on drawers?
For standard drawers, the correct cabinet knob placement is typically with knobs centered vertically, so they will be in the center of the panel. For extra deep drawers, you may install knobs centered in the top third of the drawer or on the top rail if you prefer.
How do you install Anthropologie knobs?
If you need to put the knob in a hole that’s too big, fill the hole with wood putty, touch up the paint, and then drill a new hole that better fits the knob. If the hole is too small for the knob, simply use the right drill bit to make a new hole that’s the correct size.
How do you get a cabinet pull of silverware?
Apply bonding glue to the flat end of a 1-inch stainless steel or aluminum screw post. Leave the screw unattached. Press the post against the silverware at your predetermined spot. If your cabinets need pulls with two screws, apply glue to a second post and repeat this process.
