Table of Contents
Steel wool scrub Get a 0000-grade (the finest grade) steel wool. Since steel wool is such an abrasive product, you can either use it alone or in addition to borax + vinegar +/or baking soda for better results. 0000-grade steel wool is recommended as it’s less likely to scratch up the inside of a porcelain toilet.
Can you use steel wool on porcelain toilets?
Unfortunately, it is generally unwise to use pumice or steel wool on porcelain fixtures: while it may get rid of stains, it will also scratch the finish. This creates areas for stains and bacteria to adhere directly to the porcelain. Once this happens, it’s unlikely you will ever have a clean-looking fixture again.
How do you clean a badly stained toilet?
White vinegar and borax/baking soda Sprinkle baking soda or borax generously on the stained areas. Use the toilet brush to scrub a little bit and spread the powder around. Add approximately 1½ cup of white vinegar into the bowl. Leave the solution to work for 15-30 min. Rinse. Repeat if there are still visible stains.
Can Brillo pads be used on toilets?
It’s important to use the correct type of Brillo pad in the toilet. The soap-filled steel wool pads are not suitable for cleaning toilet bowls. The Brillo pad is ideal for removing stains and general cleaning inside the toilet.
How do I get rid of GREY stains in my toilet?
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
Does vinegar damage porcelain toilets?
Vinegar will not harm your toilet’s tank, bowl or inner components. The substance is safe to use and removes dirt, grime and mineral stains, and it deodorizes toilets without the need for purchasing and using a commercial toilet cleaner.
Does steel wool damage porcelain?
On unglazed porcelain, never use any cleaners that contain dye or coloring. Never use steel wool to clean porcelain tile—small particles of steel can become embedded in the tile and grout, eventually causing rust stains. Never use hard bristles or scrub brushes, as they can scratch the tile surface.
How do I get my toilet white again?
Combine 2 parts borax with 1 part lemon juice to form a paste. Smear the paste onto any remaining stains in the bowl, such as the ring formed around the waterline. Borax cleans while lemon juice whitens. Leave the paste to soak for two hours to lighten stains and whiten the bowl.
Does Coke really clean toilets?
The fizzy soda can give your toilet a spotless clean in a pinch. Pour Coca-Cola along the edges of the toilet bowl — the carbonation will take care of the heavy lifting for you! Leave the soda in the toilet overnight. The next morning, flush the fizz away and your toilet will look good as new.
What is the best cleaner for toilet stains?
BEST OVERALL: Lysol Automatic Toilet Bowl Cleaner, Click Gel. BEST BANG FOR THE BUCK: Clorox Automatic Toilet Bowl Cleaner Tablet 6 Pack. BEST NATURAL: Better Life Natural Toilet Bowl Cleaner. BEST HEAVY DUTY: Clorox Toilet Bowl Cleaner, Clinging Bleach Gel. BEST FOR STAINS: CLR PRO Calcium, Lime and Rust Remover.
Why is my toilet turning GREY?
Toilet bowls develop discolorations for many reasons that have nothing to do with the quality of the housekeeping. Hard water contains minerals that can leave behind green, red or gray stains on the vitreous china of the bowl. Water rings can develop along with discoloration around the rim of the bowl.
What grade steel wool is Brillo?
Brillo 2.5-in x 2.75-in Fine Steel Wool.
How do I get my toilet bowl to sparkle white?
Put vinegar or lemon juice in a spray bottle. Spray the inside of the bowl with the bottle. If you use baking soda, it will begin to fizz when the acidic vinegar or juice comes in contact with it. Allow it to set for at least 15 minutes and up to two hours.
What happens if you put vinegar in your toilet tank?
Vinegar can be used inside the toilet tank too According to This Old House, “The inside part of the tank can harbor rust, mold, mildew, and bacteria that can cause unpleasant odors and impair your toilet’s functionality and longevity.” Here’s how to tackle the tank with the power of white vinegar.
How do I get rid of limescale in my toilet below the waterline?
How to Remove Thick Limescale Pour about 1 litre of undiluted white vinegar into (pouring around) the toilet bowl. Leave it to work its magic for 3-4 hours (so make sure you’ve had a wee before you start cleaning the loo!) Use more white vinegar to scrub the sides of the bowl, under the rim and down into the water.
Does Coca Cola remove limescale from toilet?
Coke is not merely a soft drink, it is also a great product for cleaning stains from your toilet bowl. Coca-Cola contains citric acid which is known to remove stains and the carbonic acid dissolves limestone and some mineral build-up. Rest for an hour and let the acids break down the stains.
Can I put vinegar and baking soda in my toilet tank?
Vinegar and Baking Soda Tank Cleaner Recipe Clean the stains with a toilet brush, and rinse with warm water. Repeat if needed. Cleaning a toilet tank with vinegar and baking soda is a safe and effective method.
What happens if you put Dawn dish soap in your toilet?
Why you shouldn’t put dish soap in your toilet “It ruins your system, so don’t do it,” wrote one person, and another added, “Please don’t do this – the rubber/seals in your toilet cistern can break down when anything else but water is used in there.”Sep 21, 2020.
Does vinegar hurt porcelain?
The good news is that vinegar won’t damage your porcelain tiles as long as it’s used properly. This is because too much exposure to strong vinegar could strip away the finish on your porcelain. This will leave it more liable to damage and looking a bit worse for wear.
Can you use Brillo pads on porcelain?
But—you guessed it—you shouldn’t be using steel wool pads to remove stains inside your toilet bowl. “The porcelain is delicate and the pads may scratch the finish [beyond] repair,” says Justin Carpenter, owner of the Dallas house-cleaning service Modern Maids.
Can you use steel wool on ceramic?
Never use steel wool, abrasive nylon, metal pads, or abrasive cleaners on ceramic coatings. They can cause minute scratches which damage the surface and reduce the non-stick quality of the finish.
