Table of Contents
For mopping floors (ceramic tile, vinyl, linoleum—not marble or other porous surfaces that aren’t safe for bleach), mix up a solution of ¾ cup bleach added to 1 gallon of water (or ½ cup if you are using New Concentrated Clorox® Regular Bleach2).
How do you clean floors with bleach?
Mix ¾ cup of bleach with 1 gallon of warm water, wipe down the surface, then let sit for 10 minutes before rinsing with warm water.
Is it safe to clean floors with bleach?
Sanitize and keep floors clean with diluted bleach. Bleach can also kill mold or mildew growing on floors, which will protect your health from the harmful spores. Clean your floor weekly with a bleach solution to keep it sparkling clean and free of germs and bacteria.
Do you need to rinse floor after mopping with bleach?
Once you have applied the bleach and water mixture to the floor with a mop or cloth, you do not have to rinse or take any further action. Instead, you should let the floor surface air-dry to thoroughly disinfect the area. The bleach will evaporate, leaving no harmful residue behind.
Will bleach ruin a mop?
Bleach may disinfect your surface, but it won’t clean it. Just remember to never mix bleach with ammonia while cleaning. Also, you’ll need to follow the bleach bottle instructions and leave it on a surface for 10 minutes to kill all the germs.
What should you not use bleach with?
DON’T use full strength bleach from the bottle for cleaning and disinfecting surfaces. Always dilute in accordance with label instructions. DON’T mix bleach with other cleaning products, especially those with ammonia or vinegar, as some chemicals don’t mix well together and can cause a chemical reaction.
Can you mix vinegar and bleach to clean floors?
Never combine vinegar with bleach. The resulting fumes are toxic and can even be deadly. Vinegar + Water is the safest combo for cleaning. (Furthermore, mopping laminate even with water can damage the flooring.
What is the best homemade floor cleaner?
Combine ¼ cup white vinegar, ¼ cup baking soda, 1 tablespoon dish detergent, and 2 gallons hot water. Apply it either with a damp cloth or a wrung-out mop. After, go over it with fresh water, then allow to dry.
Why are floors sticky after mopping?
Sticky floors occur when you leave behind too much cleaning solution, use the wrong floor cleaner, or not rinsing with clean water after mopping. Clean with a steam mop to remove the sticky residue easily.
How can I disinfect my floor without bleach?
Most hard surfaces recommend a bleach solution for disinfecting, but often you’ll want to keep bleach and other harsh chemicals away from your flooring. Instead, you can disinfect vinyl and laminate flooring by mopping with a mix of one gallon of warm water and one cup of white vinegar.
What happens if you dont rinse bleach?
When bleach is left to air dry on floors and is not rinsed away, it can leave behind bleach crystals after the bleach evaporates. Sodium hypochlorite will break down into salt and water when left to do so. Since undiluted bleach is mostly water to begin with, once the floor dries, salt crystals will be left behind.
Does mopping actually clean?
Here’s the thing – mops don’t really clean by any scientific standard. They aren’t even designed to remove unwanted matter. In fact, according the American Society of Microbiology, a brand new microfiber mop removes only about 50 percent of surface bacteria. Then its effectiveness diminishes with each subsequent use.
Can you mop with just water?
It is rarely appropriate to use plain water to clean floors because science has shown that the use of proper diluted chemicals are effective at breaking the sticky bonds that hold oily soils to floors.
Can you mix bleach and Pine Sol?
Bleach and Pine-Sol: Mixing these two chemicals in large amounts will create chlorine gas and can restrict your breathing.
What do you use to mop floors?
Using Dish Soap as a Mopping Solution Mix 1/4 cup mild dish soap and 3 cups warm water. Mix 1/4 cup dish soap, 2 cups vinegar, 2 cups warm water, and 1/2 cup lemon juice.
How do you clean a floor without a mop?
The best way to clean your floors without a mop is to do it by hand. This can be as easy as grabbing a sponge and bucket of water with a little solution and scrubbing the floors by hand. An easier way to do this is to use a microfiber cloth and use your broom to scrub your floor.
Why you should never use bleach?
Bleach is very irritating and corrosive to the skin, lungs, and eyes. As well, it has been known to burn human tissue internally or externally. On top of this- it may cause skin rash, extreme headaches, migraines, muscle weakness, abdominal discomfort, esophageal perforation, nausea and vomiting.
What do you do if you smell too much bleach?
Try to ventilate your indoor living space as much as possible. You may want to consider spending a significant amount of time outside in the hours following breathing in the fumes. If after some time your symptoms still persist, you may want to contact Poison Control using their national hotline: 1-800-222-1222.
Can I use bleach in a spray bottle?
Don’t Apply Your Bleach Solution with a Spray Bottle Even Clorox’s in-house experts say they do not recommend making or using a bleach spray solution at home.
Does vinegar make floors sticky?
Using Vinegar as a Floor Cleaner Let the floor air dry, as this vinegar solution dries clear and streak-free, leaving behind no sticky residue.
Do you have to rinse after cleaning with vinegar?
Rinse away grime with clean water. To prevent soap scum buildup, wipe shower doors with a sponge soaked in white distilled vinegar. There’s no need to rinse.
Is vinegar good for cleaning floors?
Vinegar can be used on almost all your hard-surface floors, including tile, laminate, and wood. This is especially important for hardwood floors, because any lingering debris will scratch the surface of the floor as you mop. Mix a solution of ½ cup of distilled white vinegar per gallon of warm water.
Can you mop floors with dish soap?
Floor Mopping Mild dish soap is a surprisingly good floor cleaner. All you need is 1 to 2 tablespoons of dish soap mixed in with a bucket of water. Dish soap is very effective on resilient floorings, such as linoleum and vinyl, and also works well on ceramic tile.
