Table of Contents
MAKING PIPING If you don’t want to insert the cord or prefer the look of flat piping, you can simply press this bias tape in half and use it along all of your seams.
Can you use bias binding for piping?
Bias binding is used to pipe seams since the fact it is cut on the bias enables the fabric to curve round any seams. When piping seams you can either make your own bias binding or another quick and easy alternative is using a ready made 12mm bias binding, which you simply press open.
Is bias tape the same as piping?
Piping is made with a cord and a strip of fabric that is cut on the bias (more on bias here). So if you can find the right color of bias tape that you need…… use that, it’s pre-cut. And I bought bias tape that was about an inch wide after it was all infolded.)Jan 24, 2012.
What can I use instead of piping cord?
You can use any size cording – just make sure that the surface is somewhat smooth. Usually cotton cable cord is used. If it is very twisted the piping will not look finished.
Why do you cut piping on the bias?
Cutting along the bias makes your piping take curves easier and, in general, provides an overall cleaner look than straight cut piping. Also, fabric cut on the bias doesn’t fray. Both the cutting mat and the acrylic ruler have lines at a 45-degree angle to help you find the bias.
What is the difference between binding and piping?
Though the piping and binding terms are used interchangeably by many, binding and piping are not the same thing. Binding is used to clean finish edges of a garment part where piping is used mostly for decorative purpose.
Can you use double fold bias tape instead of single?
Bias tape basics Double-fold bias tape is generally used to bind an edge, and is visible from the outside of a garment, while single-fold bias tape is used as a narrow facing, which is turned to the garment’s wrong side.
What is single fold bias tape used for?
Single fold bias tape binds both straight and curved edges, adds color accents to garments or finish off quilts, skirts or dresses! Sky is the limit when it comes to using bias tape to finish edges!.
Do you have to use bias tape?
Fabric cut on the bias is more elastic, which is an essential quality of bias tape. Bias-cut strips of fabric are used to cover raw edges of fabric or to make piping for pillows and many other sewing projects. You do not need special equipment to sew bias tape.
What size piping is best for cushions?
To make the cushion we need a continuous length of piping 5cm longer than the perimeter of the cushion pad . eg: A 46cmx46cm cushion pad requires a length of piping 189cm long. You will need a a strip of fabric 5cm wide and the length of the piping cord (it may need joins).
How wide do you cut fabric for piping?
Cut a piece of fabric that’s the size of your pillow form, plus 1/2″ in length and 1/2″ in width. This is the pillow front. Aligning the raw edges of the piping with the raw edges with the RIGHT SIDE of the pillow front, pin the piping in place all around the perimeter of the fabric.
Does fabric have to be cut on the bias for piping?
Generally the fabric is cut on the bias (diagonally across the fabric on a 45 degree angle) as it allows the fabric to stretch and bend around corners better than if it were cut on the straightgrain. For most projects you will probably need about 1/2 to 1 yard of fabric.
What are the three types of binding?
Types of binding Sewn binding. A strong, durable binding where inside pages are sewn together in sections. Glued binding. Also known as Perfect binding. PUR-glued. Content pages are glued with PUR glue, which offers superior adhesion. Lay-flat binding. Spiral. Spiral. Wire-o. Saddle-stitched.
What is piping in fashion?
Piping is a trim or edging formed by sewing a thin strip of folded fabric — typically bias binding — into a narrow tube and attaching it to the edge of a piece of fabric. Piping is often used to define or reinforce the style lines of a garment.
What is the difference between double fold and single fold bias tape?
A Single Fold Bias Tape is a strip of bias cut fabric that is folded so that both edges meet in the middle. A Double Fold Bias Tape is a single fold bias tape that is folded in half.
How do you make 1/2 inch bias tape?
These come in various sizes, I find 1/2″ useful. Step 1: Cut yourself a rectangle of fabric. Step 2: Now you need to find the bias. Step 3: Mark off strips along the bias by measuring equal distances from the line you marked. Step 4: Now cut out your strips. Step 5: Trim the ends of the strips so they’re flat.
How do you finish edges with bias tape?
With right sides facing, sew the bias tape ends together. Trim down to 1/4″ and press the seam open. Next, “stitch in the ditch” of your tape; sew the tape to your garment, with the stitch line inside the crease that is closest to the edge of the garment. This will be at a 3/8″ seam allowance.
What fabric is best for bias tape?
The best fabrics for making bias tape Lightweight silks, cotton batiste, cotton voiles, cotton quilting fabrics, shirtings, cotton chambrays all make excellent bias. But you can be a little adventurous as long as the fabric is lightweight.
What can I use if I don’t have bias tape?
Instructions Cut Your Fabric on the Bias. Line up your fabric on your cutting mat and fold it diagonally. Create Your Strips. Measure strips at a width of 2” and mark all across your fabric. Connect the Strips. Square off the ends of your strips. Stitch and Trim. Create the Double Fold.
Does bias tape have stretch?
And because Bias Tape has some stretch, it curves really nicely around curved edges of fabric……. whereas strips cut along the grain will pucker and bulge.
