Table of Contents
Too much floc can detract from the beauty of your pool. Flocculation refers to suspended particles in the water that give it a murky appearance. Flocculants are substances that help clear the cloudiness and restore the clarity to your swimming pool water. You can use too much floc, however.
Can you use too much flocculant?
Flocculant is aluminum sulfate, which is designed to clump with the particles you’re trying to remove. But if you add too much, the flocculant will start to agglomerate with itself instead of those particles. These flocculant clumps will not drop to the pool floor and can clog up your filter.
How many times can you floc a pool?
It may even be that you are not filtering enough. You should be turning your pool over – moving your entire pool volume through your filter – at least twice a day (three times a day for a commercial pool).
Is flocculant and clarifier the same thing?
The main difference between the flocculant and pool clarifier is where the clumped particles go. You can also leave the pool filter off overnight while the pool floc goes to work, which is one less thing to do. Flocculant also works much faster than the pool clarifier.
Why is my pool still cloudy after flocking?
Low chlorine level is the primary cause of cloudy water. If all the chemicals are balanced, but water is still cloudy, there might be fine particles inside the pool, and you need to use a clarifier or pool flocculant and then vacuum up the pool. If all do not work, try backwashing your filter since it might be clogged.
What do I do if I put too much clarifier in my pool?
What if I Put Too Much Clarifier In? Skim the surface of the pool if you notice a build up on it. Shock your pool to break up polymer based clarifiers. Filter, filter, filter – over time you will filter it out.
How much flocculant do I put in my pool?
Method of use Cloudy water: Add 100ml to 200ml of liquid flocculant per 10 m³ of water. Maintenance: add 5 ml of liquid Flocculant for each 10 m³ of water. Flocculation in the pool is only recommendable when there is no possibility of eliminating the cloudiness of the water with the filtering process.
How long will pool be cloudy after shock?
In most cases, a cloudy pool after shocking is only temporary and should clear up within 24 hours. Keep filtering your pool, add a little clarifier to help, and your pool should be clear in no time. If after 24 hours your pool is not clear, then you may need to look a little deeper for the solution.
Can you shock and floc at the same time?
Answer: Shock can be added at any time. Especially since you are treating a green pool. The hot sun can tend to burn off chlorine faster, but the green pool needs to be treated and the sooner, the better. The chlorine will remain high for a few days after shocking anyway whether or not the sun is out.
Does too much chlorine make pool cloudy?
Excessive levels of pool chemicals can cause your water to become cloudy. High pH, high alkalinity, high chlorine or other sanitisers, and high calcium hardness are all common culprits.
Does rain affect pool floc?
How will rain affect the process? Answer: Once the floccing agent has been added with the water circulating for a few hours, turn the pump off to allow everything to settle to the bottom (usually 24 hours). Rain will not affect this process at all.
What if you put too much chlorine in your pool?
Chlorine, either solid or liquid, is a pesticide used in pools to destroy germs, including those from feces, urine, saliva and other substances. But excessive exposure to chlorine can cause sickness and injuries, including rashes, coughing, nose or throat pain, eye irritation and bouts of asthma, health experts warn.
How do I get rid of flocculant in my pool?
How To Floc A Pool Raise the Pool’s Water Level. Raising the pool’s water level is crucial since some of it will be lost during the vacuuming process. Adjust the Water’s pH to About 7. Mix the Flocculant with Water. Add the Solution to The Water. Turn on The Filter Pump. Turn It Off. Turn the Pump on Again. Replace Lost Water.
How long does pool flocculant take to work?
Flocculant, although fast-acting, will still need around 8-16 hours to work its magic. It’s easiest to do this overnight. The pump definitely needs to be off as you want the water to be still. The floc will have settled at the bottom of the pool and will require manual vacuuming to remove the debris.
Will rain mess up flocculant?
If it’s set to rain during the treatment postpone it. The rain hitting the water would be enough to disturb the process.
When should I floc my pool?
When Do You Need to Flock? Typically, you need clarifiers and flocculants when swimming pool water is cloudy, yet chemical levels are correct and filtration units are working fine. Often, fine particulate matter that leads to cloudy pool water ends up in a pool after heavy winds and rain.
What is flocking a pool mean?
What is Flocculant? Flocculant, or pool floc as it’s sometimes called, is a chemical that you add to your pool when other methods of clearing it up aren’t working. The flocculants clump together floating particles in the water that are too small and light to sink to the bottom to be vacuumed up.
How do you vacuum a pool after floc?
How to clear up your pool with floc: Begin by adding floc directly to your water. Make sure that your pool is running for the next two hours to give the chemical and water a good chance to mix. Then turn your pool off and let it sit still for the next 8 hours – it’s best to perform this service overnight.
How do I make my pool water crystal clear?
Chlorine serves a vital purpose in keeping swimming pool water clean and healthy. In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done.
