Table of Contents
To coat over polyurethane or acrylic finishes, lightly sand the surface and wipe with acetone or alcohol before using Glaze Coat. To catch drips, cover surrounding area with waxed paper or drop cloth. Allow drips to flow freely off the sides by elevating area to be coated.
Can you put polyurethane over epoxy?
Both oil-based and water-based polyurethane can be applied over epoxy, although oil-based polyurethane may leave an amber hue (while water-based will be more clear). To ensure proper application, be sure that the epoxy has completely sealed/hardened, and sand first to allow for a mechanical bond.
Can FamoWood Glaze Coat be sanded?
Use acetone or alcohol for tool and work area cleanup. Glaze Coat can only be cleaned while it is still in a liquid state. After it has cured, paint remover, heat gun or sanding is required.
How long does it take for FamoWood Glaze Coat to cure?
Allow fresh pours to cure in a warm room (at least 70 °F). Glaze Coat will fully cure in 72 hours. An additional 1 – 2 coats may be applied after 4 – 5 hours. A third coat can be poured after 24 hours but no longer than 48 hours.
Can Glaze Coat go over polyurethane?
A glaze is essentially a clear finish with added pigment that renders it translucent. You can turn any clear finish into a glaze by adding pigment, or you can buy a pre-mixed glaze. Oil-based polyurethane and epoxy resin glazes work best on cured polyurethane.
Can you put a clear coat over epoxy?
The final coat will provide added protection and a beautiful look to surfaces. When applying a clear coat over epoxy garage floor, it is an added protective coat that provides scratch resistance amongst other benefits.
Can you clear coat over epoxy resin?
Absolutely, epoxy takes other finish very well, as it is completely inert once its hardened. That looks great by the way. I have used spar varnish on top of epoxy for a boat before. I’ve also sprayed high gloss clear coat – if you have a hvlp spray gun, I recommend that over a can for better results.
Can you add color to FamoWood glaze coat?
The FamoWood epoxy can withstand temperatures up to 120°F. Anything over this, and you will harm your epoxy product, so be careful! You can use paints and pigments to color this product, however it is recommended to test this in a small amount before adding it to your entire mix.
How thick can you pour glaze coat epoxy?
Glaze Coat CRAFT is self-leveling. However, if necessary, spread the mixture over the area with a toothpick or small tool. Do not persist in re-spreading the mixture as it sets up, otherwise it will not self-level during the curing action. Do not pour more than 1/8” thick in an application.
How thick can I pour Famowood glaze coat?
Pour mixture on surface and spread evenly using a combing action in one direction over entire surface. Do not persist in re- spreading the mixture as it sets up, otherwise it will not self-level during the curing action. Do not pour more than 1/8” thick in an application.
Is glaze coat a deep pour epoxy?
Famowood Glaze Coat is a pour-on epoxy coating. This ultra-clear, high-gloss finishing epoxy is ideal for home improvement and craft projects. Just one coat equals 60 coats of varnish. Glaze Coat is great for coating tables, bar tops, preserving pictures and photographs or imbedding items such as coins or rocks.
Does Famowood glaze coat yellow?
It completely ruined my project it also wasn’t very cheap. Not only did it turn my project yellow but also even with the heat gun there were bubbles throughout the WHOLE THING. Not only did it turn my project yellow but also even with the heat gun there were bubbles throughout the WHOLE THING.
Can you add color to Glaze Coat?
Generally, when adding pigment, it is recommended to not add more than a 3% (by weight) ratio. Test the colorant with a small amount of Glaze Coat prior to project application. Water-based colorants may reduce gel time. The finished Glaze Coat hardness may decrease slightly when adding colorants.
Can I pour resin over polyurethane?
We do not recommend putting the epoxy over water-based polyurethane. The epoxy could cause the water-based polyurethane to wrinkle or soften. Also, Epoxy does not stick very well to water based polyurethanes and you could end up with fisheyes (epoxy pushing away from the surface).
Can you glaze over finished wood?
You can use a glaze to add color effects to a finished piece of wood; however, applying glaze to unfinished wood isn’t recommended, even if the wood is stained. The glaze creates unsightly blotches and patches of uneven color. You can apply gel stain over stained, unfinished wood, though, to deepen the color.
Can you spray clear coat over resin?
Can an Epoxy Clear Coat be Applied Over a Layer of Epoxy? This type of coat works very well over existing layers of epoxy and offers a protective, glossy finish. Epoxy coatings are often used to finish off epoxy surfaces.
Can you put clear varnish over resin?
The benefits of varnish over epoxy Professional yacht refinishers now use WEST SYSTEM® 105 Resin/207 Special Clear Hardener as a clear base over wood trim before applying coats of varnish. Three coats of epoxy followed by three coats of varnish can achieve the same depth and look of twelve or more coats of varnish.
Does epoxy resin need a top coat?
Yes. Since the epoxy has cured a chemical bond is not possible so what is called a mechanical bond is needed. This simply means that the cured epoxy has to be lightly sanded before the next coat is applied: the first coat should have a matt, almost white, surface.
Is there a clear polyurethane?
Minwax® Fast-Drying Polyurethane is a clear, oil-based, durable protective finish. Provides long-lasting beauty and protection to any interior wood surface. Among the most durable coatings for wood protection. Ideal for woodwork, furniture, doors, cabinets and floors.
Do you need a top coat for resin?
But if you have a matte mold (like a baking mold that doesn’t leave your pieces glossy) then you may need to add a thin topcoat of resin to give it that pretty resin shine! Of course, the other situation that comes to mind is *ahem* when you need to fix a piece.
Is glaze coat the same as epoxy resin?
FAMOWOOD Glaze Coat is an ultra-clear epoxy CRAFT resin that dries to a high gloss finish. It is versatile enough for creating unique jewelry pieces or a coating for use on almost any surface.
Can Famowood glaze coat be used outdoors?
FAMOWOOD GLAZE COAT HIGH BUILD EPOXY COATING is an ultra-clear, high gloss finish epoxy versatile enough to be used on just about any surface, either smooth or rough, stained or painted.
