Table of Contents
Absolutely, epoxy takes other finish very well, as it is completely inert once its hardened. That looks great by the way. I have used spar varnish on top of epoxy for a boat before. I’ve also sprayed high gloss clear coat – if you have a hvlp spray gun, I recommend that over a can for better results.
Can you put clear coat over epoxy?
The final coat will provide added protection and a beautiful look to surfaces. When applying a clear coat over epoxy garage floor, it is an added protective coat that provides scratch resistance amongst other benefits.
What finish can I put over epoxy?
Both oil-based and water-based polyurethane can be applied over epoxy, although oil-based polyurethane may leave an amber hue (while water-based will be more clear). To ensure proper application, be sure that the epoxy has completely sealed/hardened, and sand first to allow for a mechanical bond.
How long should epoxy cure before clear coat?
What epoxy cure time can I expect? Epoxy cure time is typically seven days. Of course, there are variations, but if you want a rule of thumb, one week is your answer. While it takes seven days for epoxy to cure, your floor may be dry enough to walk on after 12 hours or so and ready for light use after 24 hours.
Can I put sealer over epoxy?
Be sure your epoxy floor has dried and cured thoroughly before sealing it with a protective topcoat. This will enable you to identify any potential problems with moisture seepage or alkalinity before they happen. You will be unable to correct these issues once you have sealed the floor.
Does epoxy resin need a top coat?
Yes. Since the epoxy has cured a chemical bond is not possible so what is called a mechanical bond is needed. This simply means that the cured epoxy has to be lightly sanded before the next coat is applied: the first coat should have a matt, almost white, surface.
Is one coat of epoxy enough?
Manufacturers may suggest two coats of epoxy paint and topcoat, but most standard kits only supply enough for one coat. If you choose to add color flakes, which will help hide concrete’s inherent imperfections, determine how heavily you’ll broadcast them across the floor so you don’t come up short.
Should I epoxy coat my garage floor?
Why should I consider epoxy? Epoxy is one of the toughest, most durable finishes you can use on your garage floor. It protects against stains and moisture, it’s easy to clean, and it can give a garage an attractive, professional appearance.
Can you put polyurethane over sticky epoxy?
We do not recommend putting the epoxy over water-based polyurethane. The epoxy could cause the water-based polyurethane to wrinkle or soften. Also, Epoxy does not stick very well to water-based polyurethanes and you could end up with fisheyes (epoxy pushing away from the surface).
Can lacquer be sprayed over epoxy?
Lacquer can stick to epoxy. How secure the bond is depends on a few factors but if you provide a textured surface for a mechanical bond to form — as you do when you sand — that gives the best chance for a reliable result.
Can you put a second coat of epoxy on garage floor?
Only one coat of EpoxyShield is needed on most concrete floors. If a second coat is needed / desired, it can be applied once the initial coat has dried. For the best adhesion, apply the second coat within 4 days of the first coat.
Will epoxy set in cold weather?
Some resin/hardener combinations are formulated to cure in temperatures as low as 35°F. However, simply using a hardener that cures in colder temperatures does not guarantee dependable bonds. Epoxy can be used at cold temperatures but must be handled and applied with techniques adapted to cold temperatures.
How long should epoxy dry before sanding?
Tip: The epoxy resin must be really dry before sanding. You should therefore allow a waiting period of at least 48 hours before processing. Follow the manufacturer’s instructions, as there are resins that take even longer to harden completely.
What is the difference between epoxy and sealer?
Epoxy coatings are available in clear or can be colored. They are water repellent, however, different than acrylic sealers they are non-porous and do not allow the trapped moisture to escape. Epoxy sealers are harder than acrylic sealers.
What is epoxy sealer?
Epoxy sealers form a high-build protective film on the concrete surface, producing a hard, long-wearing, abrasion-resistant finish. Epoxy sealers are much harder than acrylics. Water-based epoxies bond well to concrete and provide a clear finish, but they are nonporous and do not allow trapped moisture to escape.
Can you spray clear coat over resin?
Can an Epoxy Clear Coat be Applied Over a Layer of Epoxy? This type of coat works very well over existing layers of epoxy and offers a protective, glossy finish. Epoxy coatings are often used to finish off epoxy surfaces.
Should you sand between coats of epoxy?
Sanding will not only get out the imperfection but will also serve to provide some tooth between the first and second layers. It will look very scuffed in the short term but do not worry, once you pour the second coat over top, all of those sanding marks will disappear.
Can I varnish over epoxy resin?
Epoxy with two-part polyurethane varnish Applied over epoxy, they perform beautifully together and outlast either coating used by itself.
Can you pour epoxy over uncured epoxy?
Unfortunately, you cannot just add another layer on top, you will have to scrape the runny resin off. Make sure to get most of it off because if you leave any behind, this may leak into the new layer of resin. Once you are sure most of the gooey resin is gone, you can then pour a new layer of resin on to your surface.
How many coats of epoxy do you need?
Whatever the project you’re working on, you’ll need several coats of epoxy resin and hardener. Most projects need between two and four.
How do you get bubbles out of epoxy after it dries?
Yes, you CAN get rid of bubbles after your resin has dried! Simply sand down the entire surface of your piece, making sure you pay special attention to the areas with bubbles. Wipe away all the sanding residue with a damp paper towel. Apply a fresh coat of carefully measured and mixed ArtResin epoxy resin.
