Table of Contents
You can put new concrete over old concrete. However, unresolved issues with your old concrete, such as cracks or frost heaves, will carry over to your new concrete if not taken care of. In addition, you must pour it at least 2 inches thick.
How do you attach concrete to old concrete?
Drill 5/8-inch diameter holes six inches deep into the old concrete. Flush the holes with water. Inject epoxy into the backs of the holes. Insert 12-inch lengths of rebar into the holes, twisting them to ensure an even coating of epoxy around their circumferences and along their lengths within the holes.
How do you pour new concrete on top of old?
If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.
Can I glue concrete to concrete?
QUIKRETE® Concrete Bonding Adhesive (No. 9902) permanently bonds new concrete, plaster, and stucco to existing concrete, plaster, and stucco. Eliminates the need for roughing the surface before the application.
What is the best adhesive for concrete to concrete?
When it comes to reliability, we consider Loctite as the best adhesive for concrete blocks. Loctite adhesive offers enhanced adhesion to nearly all construction materials. It’s suitable for both indoor and outdoor projects plus is nearly three times stronger than ordinary construction adhesives.
Does Loctite work on concrete?
Loctite Epoxy Metal/Concrete is a two-part system consisting of an epoxy resin and a hardener. When mixed in equal volumes, resin and hardener react to produce a tough, rigid, high strength bond in 5 to 12 minutes. It is used as an adhesive for repairing, filling and rebuilding all metal and concrete surfaces.
Can I pour concrete over dirt?
Long story short, yes you can pour concrete over dirt.
How thick should concrete overlay be?
The minimum recommended thickness is 1 to 2 in. (25 to 50 mm) for a fully bonded concrete overlay placed on a base slab that is practically free of cracks and in which the concrete is sound, clean, and of good quality.
What is concrete overlay?
Answer: A concrete overlay is a thin color concrete cement based products that go over existing concrete for repair or decorative reasons. Overlays can be applied as thin as a feather finish up to in most cases 3/4″ depending on the desired finish.
How do you bond two pieces of concrete?
Spread a heavy layer of Loctite Metal And Concrete Epoxy on the surfaces to be joined and press the broken piece into position, leaning a heavy block against the repair until the epoxy sets. Leave undisturbed for 24 hours.
Does Gorilla Glue work on concrete?
Gorilla 2 Part Epoxy is useful for gap-filling, repairing exterior siding, or gluing plastic, wood, metal, ceramics, brick, stone, concrete, glass, and foam. The epoxy is water-resistant (though not waterproof) so it can hold up fairly well when used on outdoor items.
How do you stick something to concrete?
Mounting putty is a sticky, clay-like material that comes in sticks or cubes. It’s rolled into balls by hand and used as a substitute for pushpins or tacks. Mounting putty is especially good for cinder block walls because it is thick enough to fill in cinder block’s bumpy surface.
How do you attach something to concrete without drilling?
If you are willing to make holes in the concrete but do not want to buy the particular drill bit needed, then the simplest solution is to get nails for your project. Standard nails will not work on concrete, but some nails are made specifically for nailing wood to concrete. Cut nails will also work for this as well.
Is there an adhesive for concrete?
Concrete glue is an adhesive designed for adhering porous concrete to other surfaces—a difficult task without the right product. In fact, you can use a construction adhesive for gluing metal to concrete, fixing up crumbling roadways, and even garden stones. Whatever the job, there’s an adhesive to help you get it done.
Can you glue metal to concrete?
The best epoxy for metal is Loctite Epoxy Metal/Concrete, a two-part system consisting of an epoxy resin and a hardener. The resin and hardener are combined to create a durable, high-strength bond that dries in minutes and can be used for repairing, filling, and rebuilding all metal and concrete surfaces.
Can you use super glue on concrete?
It seals and repairs almost any surface easily and quickly. A great product for gluing wood, fabric, brick, canvas, and concrete.
Do you need gravel under concrete?
Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.
Do you need to put plastic under concrete?
Water vapor will always move from a high relative humidity environment below the building into an area of low relative humidity – even through concrete. That’s why nearly every expert in the concrete industry recommends a below-slab vapor barrier to stop the vapor drive of water upward and into your building envelope.
What kind of gravel goes under concrete?
Most concrete contractors want a mix of coarse and fine aggregate to create a compactable base that is going to be safe for settlement and drainage. Crusher run (a mix of crushed stone and stone dust) is one of the best base materials for concrete flatwork.
How strong is 6 inches of concrete?
For example, a 6-inch pad with a compression strength of 700 psi can support 1,105 psi. If it was 7 inches thick, it could support 1,194 psi, and if it was 12-inches thick, it could support 1,563 psi.
Do concrete overlays last?
How long is the life span of a decorative concrete Overlay? If maintained and sealed properly, the DCO can last 20 years and be a permanent topping to the concrete slab. Every 5 to 7 years it should be resealed.
What is minimum thickness for concrete?
What is the minimum thickness for concrete? A: Concrete is typically applied at a thickness of 2 inches or more, but the thicker it is, the stronger the slab will be. Four inches is most common for a slab. The thinner applications would include drives, walkways, slabs and footers, just to name a few.
