Table of Contents
Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.
How do I increase the draw on my compound bow?
To adjust the draw weight on a compound bow, take it to an archery shop. A bow technician will evenly tighten the limb bolts and check the draw weight. One full turn of the limb bolts usually changes its weight about two pounds. By increasing your draw weight just a few pounds at a time you’ll avoid injury.
Can you change draw length without bow press?
All draw length adjustments can be made without the use of a bow press. Draw length changes are made by simply moving the draw stop to the desired position, then rotating the modules accordingly. See draw length settings below. To change draw length, draw stops must be adjusted before the module.
What happens if your draw length is too short?
If the draw length is too short, you will feel “bunched up” or uncomfortable because you are too compressed. In addition, the elbow will have a fairly big bend in it in order for you to get the string to your face.
Is 70 lb draw too much?
For example, a bow with a 70-pound peak weight and a 80% let-off should have a holding weight of around 14-pounds. Being able to hold a bow at full draw for 30 seconds is great, but if you’re shaking, struggling, and exhausted at the end of that time, then you’re not going to be able to make an ethical shot.
Does draw length affect draw weight?
Yes, changing to a longer draw length on a bow increases the draw weight. Reduce the draw weight with the oimb bolts if you can.
Can draw length be adjusted?
Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.
How do I know if my bow draw length is too long?
The ideal draw length for you is the one that allows you to anchor in a comfortable position, with your bow arm elbow unlocked (slightly bent) and your release arm elbow and forearm pointing straight away from the target. If the release arm elbow points left or right, your draw length is too long or too short.
Can you shorten draw length by twisting string?
You can also twist or untwist your strings and cables. Twisting the cables an even amount on each side will lengthen your draw length, untwisting them will shorten your draw length. You can twist or untwist the string to adjust draw length, but it won’t quite do as much.
What is John Dudley’s draw length?
Overall draw length of 29.125″ has my Stan Shootoff perfect and a tad too long with my TRU Ball HT.
How do you adjust the draw length on a PSE compound bow?
To change draw length on the ECS: Loosen the two 8-32 size 15 Torx® screws holding the module to the cam approximately 1-1/2 turns, move the module to the desired setting. The setting will be in the window marked “DL” move the module to the same setting on both top and bottom cams.
How do I know if my bow is too short?
If you pull the string back as far as it’ll go and you can’t reach your head, then it’s way too short. If you pull the string back and it goes behind your jaw, it’s way to long. You usually want the string to be around the corner of your mouth area.
How long should my draw length be?
Resist the temptation to make your draw length longer than it should be, as this will effect your accuracy. Your wingspan typically is the same as your height in inches; So your height in inches minus 15 and then divided by 2 will be your draw length, or at least a very good starting point.
Is a longer draw length better?
Since the time always stays the same, we can conclude that the higher the distance (draw length), the greater the speed needed that means longer draw length leads to greater arrow speed and faster arrow.
What draw weight do most hunters use?
Some shooters are capable of shooting 70, 80 or 90lbs, but most adult males shoot between 60 and 70lbs. Today’s bows are extremely efficient and 40lb compound bows are more than capable of harvesting many big game animals. For whitetail deer hunting anything above 40 lbs is fine.
What is the highest draw weight compound bow?
The heaviest longbow draw weight is 90 kg (200 lb), achieved by Mark Stretton (UK) at the shooting grounds of The Bath Archers, Somerset, UK, on 15 August 2004. The bow was made by Bickerstaffe Bows (UK), of yew wood, backed with hickory.
How long should my arrows be for a 28 draw?
If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches. However, your arrow length can be longer if you need to weaken the spine of your arrow. For safety reasons, your arrows shouldn’t be cut too short.
How long should arrows be for a 30 inch draw?
The Easton spine chart recommends a spine of 250 for a 30-inch arrow shot from a bow set at 70 pounds. Cut that arrow length down to 28 inches, and the spine chart recommends a 340 spine.
What draw weight do Olympic archers use?
Learn about all the equipment used for archery at the Tokyo Olympics. Bow: In Olympic archery, competitors use recurve bows that draw an average of around 48.5 pounds for the men and 33 pounds for the women. The bow may have a mechanical sight, but no optical enhancements.
How do you adjust the draw length on a Browning compound bow?
To change to 30” draw simply remove the screws from the inner cam and move it to the set of holes marked “A” and reinstall the screws. For 28” draw, move the inner cam to the set of holes marked “C”. For 27” draw use the “D” setting. in the set of holes corresponding to the inner cam.
Does draw length matter?
WHY IT ALL MATTERS Having the right draw length and draw weight for your hunting profile is not just important for performance, but important for safety as well. Also, a longer draw length can force your front arm to a full extension, leaving your inner elbow in direct path of the string and potential injury.
How much does draw length affect arrow speed?
The longer your draw length, the longer your bow’s powerstroke will be – and the faster your bow will shoot. As a general rule, 1″ of draw length is worth about 10 fps of arrow velocity.
What is the average draw length on a bow?
If you have an average draw length of 27 to 29 inches, any modern compound bow matched with a good arrow and set to 60 pounds will work just fine on whitetails, mule deer, pronghorns, and the like with whatever broadhead style you prefer, so long as your shot placement is good.
