Table of Contents
NWM Decorating Take off any sharp edges of the artexed walls using a scraper. It is possible to “dot and dab” the plaster boards and fix to wall areas. Once dry boards can be decorated.
Can you put plasterboard over Artex?
You can plasterboard over the ceiling as it it as long as you locate joists accurately and screw the plasterboards to the joists. You could also use 2″ x 1″ timber batons which again would be screwed to the joists and then affix the new plasterboard to the timber.
How can I cover my Artex ceiling without plastering?
Part 1 – Prepare Artex Ceiling Surface Dilute the PVA with a 1:1 ratio with water and mix well. Using a large emulsion brush, paint the PVA solution on the ceiling and leave the PVA to dry (roughly one hour) Apply a second coat and then leave to dry again.
Can you make Artex smooth?
Using the spatula, load the smoother with Artex Easifix Smooth-It. Apply an even coat with firm, sweeping strokes. When the whole surface is covered, allow to dry until firm to the touch. Repeat the process as many times as required to reach the desired smoothness.
Can you just skim over Artex?
Skimming Over Artex. We wouldn’t recommend scraping artex with asbestos in it, even with masks. If you have patterned Artex, it’s possible to coat it with PVA to achieve a flat surface, and then skim it. Stippled Artex can’t be treated effectively in this way.
Do you PVA before Artexing?
Before You Start Artexing Both plasterboard and new plaster require a coat of diluted Artex sealer or PVA bonding. Artex cannot be applied over wallpaper – the wallpaper will need to be stripped off and the paste removed. Applying Artex is a very messy job, so empty the room as much as possible and put down dustsheets.
How do you get rid of Artex on ceilings?
Simply paint over the artex®, on a horizontal or vertical surface, and scrape off when softened. It is called a working wet system and means that the artex® is wet at all times which results in no asbestos fibres becoming airborne.
Does Artex devalue house?
Now, Artex ceilings can actually devalue a house. It’s very difficult to match up new repairs onto old Artex patterns. Undamaged and painted Artex is usually harmless. However, many people don’t like asbestos–based building materials in their home and will take any opportunity to remove it.
Can I remove Artex myself?
Can I Remove Artex Myself? Yes, as long as it has been passed as safe from asbestos and you are comfortable doing so. Alternatively, any tradesperson will happily take on the job for you.
What is the best paint roller for Artex ceiling?
A long sleeved mohair roller would be used to cover a textured wall or an artexed ceiling whereas a smooth foam roller would be used to paint emulsion on a nice smooth, plastered wall. The length of the hair on a roller is called the nap or pile of the roller.
How do you remove Artex without plastering?
The most popular way to remove Artex is to use a steamer to loosen it and then ease it off with a scraper. This process is slow but effective, if you hold the steamer in the same place for too long, however, the Artex will liquefy and run everywhere making a mess.
Are Artex ceilings out of fashion?
Artex ceilings Sometimes referred to as ‘popcorn’ or ‘cottage cheese’ ceilings, they fell out of favour years ago, not only because the look was no longer considered fashionable, but also because until the mid-80s Artex was made with white asbestos to make it stronger.
Is there a paint to cover Artex?
We don’t recommend you paint straight over Artex, it’ll take several coats no matter how good the paint is. But, if you level out the Artex first, then you can paint it. There are plenty of smoothing products available which can make evening your Artex easy.
Do I need to PVA over Artex before plastering?
Yes you need to apply 1 coat of PVA to make sure the plaster adheres. The PVA can be applied the day before as the artex provides a rough surface which will act as a good key.
How much does it cost to skim a ceiling UK?
The average cost to skim a ceiling can range anywhere between £200-£500 for a professional plasterer. Prices will depend on the size of the surface area and the complexity of the task. If you’re replastering your ceiling to remove Artex, it’s worth getting clued up on the costs with our dedicated guide.
How much does it cost to skim a room UK?
Repairing or re-skimming over existing plaster to correct blemishes in plaster. For a small room, prices range between £380 and £500. For medium rooms, you can expect to pay from £420 and £550 respectively. Average duration is between 1 and 2 days depending on the size of the room.
What happens if you plaster over artex?
Plastering over artex is a very common part of our trade now. Any artex must have a backing (bonding) coat applied first as as skim coat is only 3 mm thick. Once the bonding coat is dry you apply PVA to reduce suction when skimming the top coat. This will give you the desired flat finish.
Is it hard to plaster over artex?
Artex is often considered outdated and removing it can be difficult. Another option is to plaster over the artex. Plastering over the artex is much harder than plastering over a normal surface such as plaster board or a surface that has previously been plastered.
Do I need to PVA after bonding coat?
Bonding about 2-3 hours, but some do leave it to following day before skimming depends on size of area. There is absolutely NO need for PVA when skimming over bonding the same day or the next day.
Should I get rid of Artex?
Is it safe to remove Artex? Yes, you can remove Artex or other textured ceiling or wall coverings using the X-Tex product. X-Tex keeps the covering wet whilst it is being removed and ensures there are no harmful dust or asbestos dust fibres that can be inhaled.
How do you cover textured ceilings?
Popcorn ceilings should be covered with lighter materials such as paint, paneling, or planks. One option to consider is gypsum board paneling, a material that is very similar to drywall, but much lighter and easier for the ceiling to support.
