Table of Contents
No the Mathews Triax 70lb bow will adjust between 60 and 70 lbs. The Mathews Vertix bow has draw weight mods and will adjust 50# – 75#, but you have to change the draw weight mods.
Is the Mathews Triax adjustable?
The draw lengths offered on the Triax range from 24.5-30.5-inches, and can be adjusted in half-inch increments within that draw length range.
Is the Mathews Triax draw length adjustment?
(aka lug nut) Mathews Halon 32 and the Triax use the same draw length modules. So, to change draw length, the cam stays the same, and you swap out/swap in a different draw length module. So, the Triax has draw length modules that go from 24.5 inches of draw length (Module L) up to 30 inches of draw length (Module A).
How much does the Mathews Triax weight?
Weighing 4.46lbs with an axle to axle length of 28 inches, the TRIAX is a hunting bow that should not be overlooked. Available in three different peak draw weights of 50, 60 and 70 lbs.
How do I change the draw weight on my bow?
To adjust the draw weight, we have to unload or load more stress (flex) on the limbs; we do that by tightening or loosening the limb bolts. To raise draw weight to maximum poundage, tighten the limb bolts (clockwise) until both limbs are tight against the riser.
Is the Mathews Triax forgiving?
The most forgiving compact bow I have ever shot, hands down. Extremely surprised as this one continues to impress.
Which is better Triax or vertix?
Mathews sets the bar higher than ever with its new-for-2019 VERTIX. The new 30-inch Mathews VERTIX (above) is 2 inches longer than the TRIAX. With the TRIAX measuring just 28 inches between the axles, I found it to be compact and maneuverable. I hunted with the TRIAX a lot this past year.
What year is the Mathews Triax?
The 2018 TRIAX is highly maneuverable, deadly accurate and the quietest, most vibration-free bow Mathews has ever built. The TRIAX operates off a 28″ ATA platform with a 6″ brace height, and is powered by the award-winning, highly-efficient and extremely accurate Crosscentric™ Cam system producing speeds up to 343 fps.
How do you measure your draw length for a bow?
To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.
How many FPS is a Mathews Triax?
Mathews Triax Specifications Brace Height 6 ” Axle to Axle Length 28 ” Draw Length 24.5 ” – 30.5 ” Draw Weight 40 lbs – 70 lbs IBO Speed 343 fps.
What is the ATA on a Mathews Triax?
How good is the Matthews Triax really? Every year at the ATA show, companies release their next best bow for that year. The bow is designed on a 28-inch ATA platform with a 6-inch brace height. The bow also has an IBO rating up to 343 feet per second, making it one of the fastest bows in the industry.
What is the fastest compound bow?
Blackout Epic. The Blackout Epic is a quality compound bow with a top speed of 340 FPS.
Is 70 lb draw too much?
For example, a bow with a 70-pound peak weight and a 80% let-off should have a holding weight of around 14-pounds. Being able to hold a bow at full draw for 30 seconds is great, but if you’re shaking, struggling, and exhausted at the end of that time, then you’re not going to be able to make an ethical shot.
Does changing draw weight change draw length?
Yes, changing to a longer draw length on a bow increases the draw weight. Reduce the draw weight with the oimb bolts if you can. I have done this in the past by using a longer bow string. FOr each inch longer, it added 3 or 4 pounds of weight if I rememebr right.
Does changing draw weight change sights?
Increasing your draw weight can change your arrow’s tuning, and you’ll likely have to adjust your sight. While you’re at the archery shop, talk to the bow technician about your desired draw weight and buy the arrow spine they suggest.
What colors did the Mathews Triax come in?
The design team changed the geometry of the bow and engineered what they call 3D damping technology – virtually eliminating felt recoil and making the bow extremely quiet at the shot. The bow also comes in 7 finishes; Black, Gray, Lost Camo XD, Ridge Reaper Barren, Sitka Elevated II, and Sitka Subalpine pattern.
How far can a Mathews bow shoot?
How Far Can a Bow Shoot? | Ranges by Draw Weight (With Chart) Bow Type Draw Weight Maximum Range Compound bow 30 lbs 150 – 200 yards 35 lbs 200 – 300 yards 40 lbs 280 – 350 yards Crossbow 80 lbs 200 – 300 yards.
What does VXR stand for Mathews?
Mathews VXR ‘Extended Bridged Riser’ CEO Matt McPherson said Mathews saw the opportunity to improve hunting bows by applying the same “extended bridged riser” design of its target bows to its hunting line.
Whats the difference between the Mathews vertix and VXR?
In my honest opinion, the VXR is a shorter version of the Vertix. If I had a 28″ or shorter draw length, and was shopping for a new bow I would buy the VXR all day long. If I bought the Vertix last year, and love it, then there is no need to buy the VXR. I would hold onto the Vertix.
What bows did Mathews make in 2019?
The 2019 VERTIX is the peak of versatility and performance. Switchweight modules allow you to change peak draw weight in 5 pound increments. Available in 60, 65, 70 and 75 pound peak weights, each set of mods are programmed for an incredibly smooth draw.