Table of Contents
How do you add another part to a drawing in SolidWorks?
With a part document open, click Insert Part (Features toolbar) or Insert > Part. Browse to a part document and click Open. The Insert Part PropertyManager appears. Under Transfer, select any combination of items from the inserted part to be included in the derived part.
Can you insert a part into a part in SolidWorks?
Inserting a part into a part is simple. Go to the File menu and click Insert and Part. Then browse to find the existing part. Finally, you’ll have to locate the part to make sure it’s in the right place for your design process.
How do I make multiple parts in SolidWorks?
To split bodies: Click Split (Features toolbar) or Insert > Features > Split. In the PropertyManager, set the options. Under Resulting Bodies, select the bodies to save under , or click Auto-assign Names. Double-click the body name under File, type a name for the new part in the dialog box, then click Save. Click .
How do I change the inserted part in SolidWorks?
After you insert a part, you can move, copy, rotate, or mate it using Move/Copy Bodies (Features toolbar). Right-click the part and click External References. Select a configuration in Configuration, and click OK. You can control the configuration with a design table. See Base Parts in Configurations.
How do I make a part from assembly sketch?
Creating a Part in an Assembly Click New Part (Assembly toolbar) or Insert > Component > New Part. Type a name for the new part in the Save As dialog box and click Save. Select a plane or planar face (while the pointer is ). Construct the part features, using the same techniques you use to build a part on its own.
How do you mate two parts in Solidworks?
To add a mate: Click Mate (Assembly toolbar), or click Insert > Mate. In the PropertyManager, under Mate Selections, select the entities that you want to mate together for Entities to Mate . You can temporarily hide faces to select an obscured face by hovering over a face and pressing Alt.
What is a multibody part in Solidworks?
A multibody part consists of multiple solid bodies that are not dynamic. If you need to represent dynamic motion among bodies, use an assembly. Tools such as Move Component, Dynamic Clearance, and Collision Detection are available only with assembly documents.
How do you put two drawings together?
Open a drawing. Click the Layout tab and then click the arrow next to the Insert group. Select the source file to merge into the current drawing. Select additional source files to be merged, one at a time, to add additional sheets to the current drawing.
How do you merge objects in SolidWorks?
To add bodies together: Click Combine. (Features toolbar) or Insert > Features > Combine. In the PropertyManager, under Operation Type, select Add. For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies. Click Show Preview to preview the feature. Click .
How do you split a sketch in SolidWorks?
In an open sketch, click Split Entities (Sketch toolbar) or Tools > Sketch Tools > Split Entities. The pointer changes to . Click the sketch entity at the location where you want the split to occur. The sketch entity splits into two entities, and a split point is added between the two sketch entities.
What does split line do in SolidWorks?
tool projects an entity (sketch, solid, surface, face, plane, or surface spline) to surfaces, or curved or planar faces. It divides a selected face into multiple separate faces. You can split curves on multiple bodies with one command.
How do you make a derived part in SolidWorks?
To create a derived part from an assembly component: In an assembly document, select a component. Click File > Derive Component Part. Under Transfer, select any combination of items from the seed component to be included in the derived part.
How do I move sketch from assembly to part in SolidWorks?
In the assembly, edit the profile of the sketch. While in the profile, perform a Ctrl + A (Select All), then a Ctrl + C (Copy). In the part file, go to the Sketch command and select the desired reference plane that you want the sketch to be on. Ctrl + V to Paste.
How do you copy a sketch from an assembly to a part in SolidWorks?
To copy and paste a sketch: Select the closed sketch in the FeatureManager design tree. Click Edit > Copy or press Ctrl+C. Click in the sketch or document where you want to paste the center of the sketch. Click Edit > Paste or press Ctrl+V.
What is layout in SolidWorks assembly?
You can design an assembly from the top-down using layout sketches. You can construct one or more sketches showing where each assembly component belongs. Then, you can create and modify the design before you create any parts. You can make changes quickly, and in one place.
What is loft in Solidworks?
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. For a solid loft, the first and last profiles must be model faces or faces created by split lines, planar profiles, or surfaces.
What are mating parts?
The definition of “mating” is simply two areas of one or more parts that contact each other. The areas may be flanges, edges, aligning holes (and their surrounding surfaces) or similar features.
How do I use assembly in Solidworks?
Creating an Assembly from a Part Click Make Assembly from Part/Assembly (Standard toolbar) or File > Make Assembly from Part. An assembly opens with the Insert Component PropertyManager active. Click in the graphics area to add the part to the assembly. SOLIDWORKS makes the first component fixed.
What is the difference between part and assembly in Solidworks?
A general rule to follow is that one part (multibody or not) should represent one part number in a Bill of Materials. A multibody part consists of multiple solid bodies that are not dynamic. If you need to represent dynamic motion among bodies, use an assembly.
