Table of Contents
How do I change my printer output tray?
From Microsoft Windows: Open the Application’s print window (ie: select the File menu, then Print). Select Properties or Printer Properties. Select the Printing Options tab. Select the Output Destination dropdown and select the required destination tray: Select Apply to save changes. Select OK to exit.
How do I remove the paper tray from my HP Envy 6055?
Slide the input tray up. When the tray stops, press outward on the tray retainer to provide enough clearance for release, and remove the tray from the printer.
What do you do if your printer tray is stuck?
Perform the following steps to remove the tray: Push the tray back into the machine as far as it will go. If the tray is in as far as it will go, pull the tray out to see if it can be removed. If you push the tray in and out a few times, the tray will slide out.
How do I put 4×6 paper in my HP printer?
Slide the paper width guide all the way to the left. Lift the Out tray and remove any paper that is in the In tray. Line the photo cassette up with the far right edge of the In tray. Gently slide the photo cassette into the printer until it snaps into place (see Figure 3).
How do you use the Ricoh bypass tray?
Open the bypass tray. Insert the paper face down until you hear the beep. While pressing down the release lever, align the paper guides to the paper size. If the guides are not flush against the paper, images might be skewed or paper misfeeds might occur.
How do I disable Xerox tray 5?
To disable a tray Right click one of the trays in the Paper Trays tab. Click Disable Tray from the Tray pull-down menu.
How do I change my Ricoh output tray?
Press [Machine Features Settings] on the Settings screen. Press [Fax Settings] [Reception Settings] tab [Specify Tray for Lines]. Press [On], and press the line to specify. Select the tray to deliver the output paper, and then press [OK].
How do you close a paper tray extender?
Gently press on the edge of the extender that is inside the paper tray. The extender should give slightly. It’s now loose. Remove the tool and close the extender.
Where is the input tray?
The input tray is the tray on the printer that serves as the paper source. The output bin is a bin on the printer where printed jobs are delivered. Users can use the input-tray and output-bin job attributes to specify a tray name, such as 3-hole and a bin name, such as staple .
Why does my HP printer keep jamming?
Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.
What does tray lock mean on HP printer?
HP Printer Paper Tray Lock A Paper tray lock is used to prevent the tray from accidental use. The lock is used in printers that contain multiple trays. If your printer contains two trays, you can lock the optional tray.
Can you put photo paper in a HP Deskjet printer?
Loading photo paper Raise the input tray. Lower the output tray. Pull out the tray extender. Load a stack of photo paper into the input tray with the short edge down and print side up.
How can I print a 4×6 photo at home?
Your choices are: To first crop to 4×6 so you control what gets cut off and what is included. Select and open your photo, click on Edit. Select Crop. Or. Use the customize screen when printing. Select the photo, select print. Choose your printer, paper size, print size.
Can HP 8020 print photos?
Print Capabilities The OfficeJet Pro 8020 supports borderless printing, but only on photo paper or brochure paper.
How do I install HP OfficeJet 8020?
Disconnect from Virtual Private Network (VPN) connection before downloading.Install HP Smart app to complete setup and support Install printer software and drivers. Create an HP account and register your printer. Connect your printer to Wi-Fi, load paper, and install cartridges.
Which tray is the bypass?
The bypass tray, also known as the multi-purpose tray or general-purpose tray, is a tray on your copier that can be used to print jobs on media that cannot be run from the main trays of your device. You can typically find this tray on the side of the device, sometimes as an optional pop-out drawer.
What is Tray Switching?
When a tray runs out of paper, tray switching enables the printer to switch between trays when the trays contain the same paper type and size. Tray switching is controlled by the printer driver, front panel, or CentreWare IS.
What is an MP tray?
Use the MP Tray for special print media, such as photo paper or envelopes. If the [Check Paper] setting is set to [On] and you set the paper in MP tray, a message appears on the LCD asking if you want to change the paper type and paper size.
Where is the bypass tray on a Xerox printer?
Open the Bypass Tray, located on the left side of the printer, by rotating it outward.
Why won’t my printer print from the bypass tray?
The Tray 5 (Bypass Tray) needs to have the same paper the document selected loaded in it. As well you must select Tray 5 (Bypass Tray) from Printer Properties and also in Page Setup. Ensure Correct Paper is loaded in Tray 5 (Bypass Tray).
What is Tray setting?
These settings specify the paper type, paper size, and functions allowed for each paper tray. When a tray runs out of paper during printing, this determines whether or not another tray with the same size and type of paper is automatically selected and printing continues.
How do I select a printer tray in Windows 10?
NOTE: The steps may differ depending on your application. From within your application, click File => Print. Click Properties. Click on the Basic tab. In the Paper Source dropdown choose the Tray that you want to print from. Click Apply => OK. Click OK or PRINT, depending on your application.
