Table of Contents
Knobs on Doors, Pulls on Drawers The second option we recommend if using a combination of knobs and pulls is to put knobs on all doors and pulls on all drawers. Note that neither option mentioned is more superior than the other. It simply comes down to personal preference.
When should a drawer have 2 pulls?
Drawers wider than 18″ need two knobs/pulls, whereas drawer narrower need only one. If a drawer is wide enough to need two knobs, they should be set about 1/6th of the drawer length from each end (roughly). Single pulls or knobs on drawers should be laterally centered and slightly higher than vertical center.
Can knobs be used on drawers?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. It is much more comfortable to open a drawer using a pull. This allows the whole hand to grab instead of only your fingertips.
Can you use both knobs and pulls on kitchen cabinets?
Can I mix and match knobs and pulls? Of course! When doing so, most people install knobs on doors and pulls on drawer fronts. Mixing knobs and pulls is a great way to add another layer of detail to your kitchen.
Can you mix knobs and pulls in a kitchen?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
Should drawer pulls be centered?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
How many pulls should a drawer have?
For really wide drawers, we always recommend using two cup pulls, and then evenly space them. As a general rule of thumb, if your drawer is 30″ or wider, I like to use two cup pulls. Lastly, if you have tall drawers, you can either center them in the overall drawer, or install them on the top rail.
How many knobs are in a 30 inch drawer?
Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter. Large Drawers that are 30” to 48″will require a pull that is longer than 8″ or a knob that is 1″ in diameter or greater. Using two pulls or knobs for a large drawer also works great.
Do you put pulls on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Can you put knobs on drawers?
Yes, you can put knobs onto your kitchen drawers! The installation process is very easy, and many individuals even prefer it over installing traditional pull handles. The trickiest part might be deciding where to place the knobs on the drawers and placing them in the same spot on every drawer.
Are knobs better than pulls?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
Do knobs go on drawers or cabinets?
Knobs can be placed on both cabinetry doors + drawers. Mounted on the door stile, cabinetry knobs are placed on the opposite side of the door hinge + typically 2-½” to 3” from the bottom corner of the door for upper cabinets. While on base cabinets knobs are usually placed 2-½” to 3” from the upper corner of the door.
Can you mix drawer pulls?
You can coordinate knobs and pulls from different collections by choosing the same finish. But make sure the finish matches perfectly. Even slight variations will be noticeable.
Can you mix knobs and pulls in kitchen?
Although it’s definitely possible to coordinate cabinet hardware in different finishes, it’s much easier and safer to mix different shapes of knobs and pulls in one matching finish.
Do knobs go on doors or drawers?
1: In traditional spaces, the general rule to follow is knobs on doors and pulls on drawers. Sometimes we’ll break this rule for small drawers or small spaces, like bathrooms! From our Sunset House.
Can you mix cabinet knobs?
Mix and match knobs and handles interchangeably. The key is to stick with a pattern throughout all cabinetry. Don’t get overwhelmed with options though – it’s best to start with only two different types of hardware for cabinetry with at least 20 doors and drawers.
What is the difference between a knob and a pull?
What is the difference between a knob and a pull? A knob requires one fastener or screw. A pull requires two fasteners or screws.
Can you mix drawer pull sizes?
There’s no “rule”, it’s a matter of looking at as many kitchens as possible and figuring out the look you prefer. I also used a variety of sized pulls on drawers of different widths, and used Restoration Hardware.
Do drawer pulls have to be in the center?
As far as the height of your drawer hardware, the classic choice is to center them vertically. With multiple drawers stacked on top of each other, choosing this placement makes each knob a little lower and harder to reach.
Where do you put handles on drawers?
Most drawer pulls are centered on the drawer fronts, but if the cabinet you’re working on has two or three drawers the same size and one larger one at the bottom, install the bottom knob (or pull) higher than the center of that drawer front. Install it so all the knobs on the cabinet are spaced evenly.
How long should bar pulls?
Bar Pulls are traditionally measured center-to-center and they should not exceed 1/3 of the length of a cabinet door or width of a drawer. Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall.
