Table of Contents
Use EFI-Live Explorer, connect your Autocal to it via the usb cable. Three windows appear, the lower window has your tune file, the upper left is where you browse for the saved folder, the upper right is where you drag and drop it to using your “mouse” and “left click/hold” and the drag and release it.
How many tunes can an AutoCal hold?
You can have more than one tune on your AutoCal ready to load/switch tunes, if the tuner does ctz files you could have up to 4 different tunes on one AutoCal.
Can you switch tunes with AutoCal?
Differences between FlashScan and AutoCal AutoCal cannot be used to create or change tune files.
Does EFI Live come with tunes?
Premium Member. EFILive is just a software that takes the ECM parameters and enables “you” or a “tuner”(person that manipulates the parameters) to change them and flash them back into the ECM. EFILive does not build performance tunes or even tune them selfs. The only provide the software.
How do I load a TCM tune?
To load your TCM tunes: Turn the key to the run position (truck not running) 2. Plug SPADE into your truck using the OBD cable 3. Toggle down to Tuning Tool, press OK 4. Toggle to Program Full, Hit OK, Then select MOD TCM 5.
Can you tune multiple trucks with autocal?
The autocal can do up to 5 trucks FYI.
Can EFI Live read codes?
With efi live deletes there will be no codes, emission components get turned off, or removed from the trucks brain. Just make sure to tell your tuner exactly you want done.
What is V3 AutoCal?
SKU: EFILive V3 Autocal. The EFILive V3 Autocal is a scan tool for GM and Cummins vehicles. It also supports module flashing. Tuning is not included. This is only a scan tool used for diagnostic purposes.
What does a DSP 5 switch do?
The CSP5 and DSP5 switches allows users to switch on the fly between 5 user defined tunes. With the DSP5 switch, you can change your tuning “on-the-fly”. Tuning not included, you must have DSP5 Tuning for use with this switch.
How much HP does EFI Live add?
A basic tune to add 100 hp or so can be accomplished by changing only five or six tables in the engine’s software calibration. Where EFILive really shines is tuning a modified truck to run like a stocker.
Will EFI Live delete DPF?
Registered. Yes EFILive can do DPF delete tuning.
Do tuners help gas mileage?
The short answer is “yes,” but a longer explanation is in order. While manufacturers of aftermarket performance products claim tuners can add 3-4 mpg, the actual savings, if any, largely depends on how and where you drive. By definition, performance products are designed to increase engine output.
What is TCM tuning?
TCM Tuning is the modification to the programming calibration of a Transmission Control Module (TCM). Ever since 2001 when the Duramax was first offered in the 2500 and 3500 GMC and Chevy HD truck it has been paired with the Allison 1000 transmission.
How do I connect my AutoCal V3 to my computer?
Connect AutoCal V3 as a USB Thumb Drive to Windows Explorer Connect AutoCal V3 to your PC. On AutoCal V3 navigate to Options -> File System -> USB Thumb Drive. Using Windows Explorer, locate the files you wish to copy in the correct folder of your AutoCal V3 and copy or drag the files into the desired folder on your PC.
What is EFI Live AutoCal?
EFILive’s AutoCal device is intended to provide a convenient platform for professional tuners to distribute custom tunes to their customers. It allows the tuner to update and optimize the original tune without shipping and/or removing controllers from customers’ vehicles.
Can you use EFI live on more than one truck?
Yes, it can.
How do I add my VIN to AutoCal?
Click the [F7: Licenses] button in the left-hand pane. Click the [F3: VINs] button in the left-hand pane. Paste the Activation Code and enter the License number from your email. Select [Activate VIN License] to add the licenses to the device.
How do I update my AutoCal firmware?
Click the [Check Firmware] button at the top of the window. Boot Block and Firmware versions, along with Configuration files are displayed. If a firmware update is available then the [Update Firmware] button will be visible. You should click that button to update the firmware in the connected device.
Does EFI Live work on Mac?
No it does not. You would have to boot windows through your mac with parallels or something of that nature.
How do you clear codes on a Duramax?
With the Dodge trucks you can disconnect both batteries, both cables. Then hold the positive and negative cable together off one of the batteries for 10 seconds. This will completly drain the system and clear any codes that it may have. It should work the same with a Duramax.
How do I connect FlashScan to AutoCal?
Remote Link AutoCal Connect your FlashScan device to your PC. Start the EFILive V8 Scan and Tune application. Open the Control Panel. Select the [F7: Licensing] option. Select [Link]. Click on the drop down of [Link] button and select [Generate Remote-Link Code]. Enter the serial number of the AutoCal to be linked.
How long is a DSP-5 GOOD FOR?
DSP-5 Export License Application Requirements – ITAR Export Compliance.
What is a DSP switch?
Your DSP switch is a voltage switch, each click is a different voltage. Depending on the voltage a different tune will be loaded. You only have to plug in the EFI live for diagnostics, loading tunes, etc.. In addition to programming the ECM you can program the TCM.
Can you switch EFI live on the fly?
By adding the DSP5 switch to your EFI Live tuned Duramax, you can change tunes on the fly. That means no more waiting on a programmer to download changes by reflashing the computer through the OBD2 port. With the installation of this switch, changing tunes is as easy as reaching over and turning a knob!.
