Table of Contents
You can also use Pine-Sol® Original Squirt ‘N Mop®. It’s safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.
Does Pine Sol damage hardwood floors?
Dilute ¼ cup of Pine-Sol in 1 gallon of water in a bucket. Mop your wood floor with the solution, being sure not to leave puddles, which can crack and warp wood flooring. Pine-Sol is not recommended for unsealed or visibly worn floors or for oiled or waxed wood floors.
What is the best thing to use to clean wood floors?
You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer’s instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.
Can you use Pine Sol to mop floors?
Mix 1/4 cup of Pine-Sol® Multi-Surface Cleaner with one gallon of warm water. Mop your floor with the mixture. After mopping, rinse your mop in fresh, clean water and wring it out so it’s just damp.
What disinfectant can I use on hardwood floors?
wood floor disinfection with vinegar Vinegar is the best natural disinfectant for wood floors that has been in use for years. The following procedure will help you to disinfect your wood floor using vinegar solution and a mop. Mix a half-cup of white vinegar with one gallon of water in the bucket.
What should you not use Pine-Sol on?
Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood.
Are wet swiffers bad for hardwood floors?
According to the manufacturer’s website, the Swiffer mop is appropriate for use on finished hardwood floors when you use either the dry or wet refill cloths. Wet refills aren’t recommended for use on unfinished, waxed or oiled floors, and you should use them with caution on finished hardwood.
How do you freshen old wood floors?
Spray a small amount of hardwood cleaner onto the floor, and then wipe the floor down with a dry terry cloth mop or dust mop. If your floor is riddled with spots, stains, scuff marks, or debris, remove them with mineral spirits and then mop the area thoroughly.
Is Vinegar a good cleaner for hardwood floors?
Just don’t use vinegar and water to clean hardwood floors. The finish is the protective layer of your hardwood floors. Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine and leave a dull appearance.
Which is better Pine-Sol or Fabuloso?
Among them, Pine-Sol was the clear winner, scoring 74 out of 100 point with high marks from removing soap scum, lack of streaking and cleaning heavily soiled surfaces. Fabuloso, by contrast, got horrendous marks on soap scum, streaking and soiled surfaces, but at $2.10 it only costs a third of what Pine-Sol does.
Why is my floor sticky after mopping?
When you use a traditional mop and bucket you aren’t cleaning the floor you are just spreading dirt! Hence the reason you will find your floor continues to feel sticky once you have mopped it. Another point is you are leaving the floors wet which allows the dirt off your shoes to be transferred back on to the floor!Jan 13, 2020.
Can I mop with Pine-Sol and bleach?
The Association of Residential Cleaning Services, International (ARCSI) says bleach should never be mixed with the following: Pine-Sol: If you mix bleach and Pine-Sol in large amounts, it will create chlorine gas.
What should you not put on a wood floor?
Never put items on your floor that could burn the wood. Things such as candles, a curling iron, a hot plate or an old space heater could not only cause scorch marks on your beautiful wood floor, but they could ultimately start a fire. Always keep items that produce a lot of heat off of your wood flooring.
Does Bona floor cleaner sanitize?
Bona PowerPlus Antibacterial Hard-Surface Floor Cleaner uses the power of hydrogen peroxide to effectively clean and disinfect floors. When used as directed, it can clean up to 99.9% of household germs.
Should I mop the floor with bleach?
Sanitize and keep floors clean with diluted bleach. A homemade cleaning solution using bleach effectively sanitizes floors after you clean them. Bleach can also kill mold or mildew growing on floors, which will protect your health from the harmful spores.
Can I use Pine-Sol in a spray bottle?
Pine-Sol cleans all kinds of counter tops and surfaces while disinfecting. Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes.
Can you mix Pine-Sol and Dawn dish soap?
A: No. Pine-Sol® products should not be used on dishes.
Is Pine-Sol toxic to breathe?
Pine SOL isn’t meant for your respiratory system This is due to the corrosive nature of some of the chemicals that make up Pine SOL. The effect these chemicals can have upon inhalation can vary wildly from individual to individual.
How often should you clean hardwood floors?
In most households, wood floors should be cleaned at least four to six times a year.
Is it better to use a mop or Swiffer?
We strongly recommend investing in both a Swiffer and a mop as they each have unique benefits. Swiffers are ideal for casual, small cleanups while mops provide great benefits for larger messes. You’ll be prepared to clean anything and everything by having both in the house along with your other basic cleaning supplies.
How do you tell if your wood floors are sealed?
To tell if your wood floor is sealed, find an inconspicuous area, dab a drop of water on the surface, and see if it soaks in or beads on top. If the water drop beads on top of the wood, your floor is sealed. Surface-sealed floors are stain and water-damage resistant and easiest to clean.
