Table of Contents
All you need are a few hours, a helper and the right tools and toilet parts for the job. Before you begin learning how to install a toilet, choose your new toilet, and if you aren’t replacing an existing toilet, make sure you have plumbing ready for the new installation.
Do you need a plumber to install a toilet?
Yes. A toilet is part of your plumbing system, and needs to be installed by a licensed and qualified plumber. If you are undertaking a complete bathroom renovation and replacing your toilet as part of this job, your bathroom renovator needs to be appropriately licensed and use a plumber for this job.
Can a beginner install a toilet?
Learning how to install a toilet isn’t complicated and you can do it even if you are a beginner and have no DIY skills! With a couple of hours (max) and willingness to learn, you can install a new toilet yourself so you can save on installation costs!Sep 23, 2019.
Is installing a toilet difficult?
Replacing a toilet is a major project, but it is not as difficult as might be imagined. The hardest tasks usually are selecting a new toilet and removing the old one. Then remove the tank cover, flush the toilet and sponge the tank dry. Use a plumber`s plunger to force as much water as possible out of the bowl.
Can you remove and install a toilet yourself?
If you need to replace an old toilet, repair a toilet flange or install new bathroom flooring, you’ll need to know how to remove a toilet. Removing a toilet is a relatively simple project that most DIYers can tackle either alone or with a helper.
How long does it take a plumber to install a toilet?
The home-improvement professional marketplace also estimates that most toilets can be installed within two to four hours by a professional plumber, though it may take longer as a do-it-yourself project.
How long does it take for a plumber to install a new toilet?
Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don’t have a lot of DIY experience, you might want to add an hour or two to that timeframe.
What is the cost of replacing a toilet?
Toilet installation costs around $372, with most people paying between $224 and $531 for a full toilet replacement, depending on the type of toilet and the difficulty of the job. This includes the cost of the toilet, labor and equipment needed for the installation.
Do toilets go bad?
Although some plumbers would say a toilet could last up to 50 years, a federal law actually states that any toilets built before 1994 that holds more than 1.6 gallons per flush must get replaced.
Do all toilets fit the same?
Most toilets will have a 12 inch rough-in. If you’re replacing an existing toilet, look for a replacement toilet with the same rough-in. A toilet with a larger rough-in measurement will require you to change your plumbing configuration or move the wall to get the toilet to fit.
Should you tile under a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first. The floor will be sealed a lot better with the tiles being laid under the toilet.
What is a good toilet to buy?
8 Best Toilets for the Home in 2021 Best Overall Toilet: Kohler Corbelle K-3814-0. Best Toilet for Modern Spaces: Swiss Madison Well Made Forever One Piece Toilet. Best Two-Piece Toilet: TOTO Promenade 2-Piece Toilet. Best Value One-Piece Toilet: Glacier Bay 1-piece Dual Flush Toilet.
Is it safe to leave a toilet off overnight?
Yes, absolutely, fumes can be harmful when replacing a toilet, but they can be kept at a minimum and shouldn’t pose a health risk if you work reasonably quickly and keep the drainpipe covered between removal and installation.
Can you replace bathroom floor without removing toilet?
They often ask if they should remove the toilet before installing a new bathroom floor. While it is possible to install a new linoleum or ceramic tile floor without removing the toilet, it is not recommended and actually can increase the labor involved in the project.
How do you unblock a badly clogged toilet?
How Do You Unblock a Badly Clogged Toilet? Try Soap. Dish soap serves as a kind of lubricant to loosen the clog and dislodge the debris. Try a Different Plunger. Try a Coat Hanger. Try Dissolving the Clog. Try a Plastic Bottle. Try Vinegar and Baking Soda. Toilet Still Won’t Unclog?.
How much will a plumber charge to install a toilet?
How much will a plumber charge to install a toilet? Toilet installation costs range from $224 to $531, with the national average at $372. Plumbers can charge anywhere from $65 to $250 per hour for labor costs.
How often should you replace your toilets?
How Long Do Toilets Last? Typically, toilets need replacement after 25 years of use so this can be considered the average toilet lifespan.
How much does it cost to replace a toilet flush valve?
A simple toilet valve replacement typically costs $70 to $150. A complete rebuild of the closet tank which includes the flush handle, flush valve, flapper, ballcock, and tank bolts costs around $275.
How long does it take to change a toilet wax ring?
Set the new toilet by placing a wax ring on the flange, dropping the toilet onto it and fastening it to the floor with new toilet bolts. Hook up the water when the toilet is secure, and turn on the water. This job shouldn’t take any more than two to three hours.
Can a handyman replace a toilet?
Minor plumbing If you are in desperate need of stopping a constantly flushing toilet or leaks, a handyman can take care of this for you. If the plumbing issue is more complex than a leak or you need a toilet repaired, that’s when it’s time to call in the professional plumber.
How many years does a toilet last?
Toilets can last for up to 50 years under average conditions. However, this doesn’t mean that you won’t need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.
