Table of Contents
A manual tile cutter, hacksaw or wet saw are generally best for porcelain tiles used in bathrooms. Whatever tool you use the process is similar: score a shallow cut in the tile and then use the brittle nature of the porcelain to snap the tile apart.
Can you cut tile with a regular saw?
Shortly, the answer is yes. It can be cut with a traditional manual tile cutter or a wet tile saw. With the tile cutter, a specific scoring wheel gets a shallow cut in this material. This way, you can make the most of the brittle nature of ceramic, snapping the tile along the cored cut to finish.
What saw blade to cut ceramic tile?
The Blade. The best type of blade to use with an angle grinder when cutting ceramic tile is a diamond-tipped, smooth-edge blade without any notches or serration. Notched blades are for porcelain and serrated blades are more suited to natural stones.
Can you cut tiles with a junior hacksaw?
One alternative to cutting stone tile with a wet saw is to make cuts using a manual hacksaw. Put on your safety glasses and use your hacksaw to slowly and carefully cut through the tile along the scored line. Use sandpaper or a sanding stone to smooth out rough edges after you’ve finished cutting through the tile.
How do you cut tile without a cutter?
For any type of tile (like ceramic, glass, or porcelain), an angle grinder is best for round cuts whereas a glass cutter can make smaller cuts. And if you have a lot of tile to trim, a wet saw is one of the easiest, quickest options.
Can you cut porcelain tile without a wet saw?
Using manual hand tools is the best way to cut porcelain tile without chipping when you can’t afford fancy tools. But the best way is to use a tile nipper. Especially when you need a circular cut in the tile, cutting those areas is difficult with other tools such as a wet cutting saw.
Can you score tile with a utility knife?
The tool is used to make curved and intricate cuts not possible with straight cutting devices. Scribing the tile in the desired location with a tile scriber or utility knife beforehand makes the task much easier. It is important to bite small pieces at a time to avoid breaking the tile.
Do you have to use a wet saw to cut ceramic tile?
While all tiles can be cut on a wet saw, you’ll get the best results from using a wet saw on the following materials: stone tiles, such as marble or granite; porcelain tiles; glass tiles, when the wet saw has been outfitted with a glass cutting blade; and commercial grade ceramic floor tiles.
Will masonry blade cut ceramic tile?
Masonry saw blades are designed to cut through brick, stone, ceramic, tile and other types of masonry materials. They can be used in various applications, such as detail work, tile work and precision cutting.
Can you cut ceramic tile with a Sawzall?
Diamond Grit The Torch Sawzall blades are ideal for cutting cast iron, hard tile, masonry and other abrasive and hard materials. The result is a significantly lower cost per cut. The precisely controlled size and placement of the diamond grit allow these blades to cut up to 2x faster than standard carbide grit blades.
How do you cut tiles already on the floor?
Turn the angle grinder so the blade will meet the tile perpendicularly. Turn on the grinder and push the blade straight down into the tile and its backing. Once you have cut through, you can pull the blade back for a short cut, or push the blade away from you to continue cutting through the tile for longer cuts.
What can I use instead of a wet saw?
An angle grinder doubles as an excellent alternative to the wet saw as it can give cuts in different amazing styles and shapes, including the L-shapes and cut, the circle, straight and square shapes and cuts. The angle grinder is perfect for producing results when the cuts and shapes are curved cuts.
What is the best way to cut porcelain slabs?
As mentioned elsewhere, the only effective way to cut porcelain, ceramic or vitrified paving is by using a diamond blade. It is not possible to accurately cut these types of paving with hand tools nor with basic abrasive blades, even if they are marked as suitable for cutting stone or hard materials.
What can I use to score a tile?
Draw the shape of the cut with a marker or pencil. Secure the tile to a work bench or other work surface with a clamp. Pull the angle grinder carefully along the cut line to score the tile. Make deeper and deeper cuts along the score until you cut through the tile.
Can you cut porcelain tile with a hand tile cutter?
A tile cutter is used to cut ceramic tiles upto a desired size and shape. However, depending upon the type of texture, you can even cut certain porcelain tiles using a standard manual tile cutter.
What is the best blade for cutting porcelain?
The best option for cutting porcelain tiles are diamond blades. They are made of steel with a diamond coating, making them very tough, durable and perfect for precise cutting. Blades for cutting porcelain tiles can also be used with other materials, such as concrete, granite or wall panels.
Can you dry cut porcelain tile?
Dry-cut diamond blade Stone, porcelain and glass tiles offer beautiful options for bath and kitchen tiling projects. But cutting these hard materials presents a unique challenge. Straight cuts are easy to make with a diamond wet saw. grinder for as little as $50 and a dry-cut diamond blade to fit it starting at $20.
Can a diamond masonry blade cut tile?
These blades are typically available in sizes that range from 4” to 12” diameters. They can be used in grinders, circular saws, and tile saws to cut a variety of materials including tile, stone, marble, granite, masonry, and other building materials. Blades are available for both wet and dry cutting applications.
