Table of Contents
To adjust the draw weight on a compound bow, take it to an archery shop. A bow technician will evenly tighten the limb bolts and check the draw weight. One full turn of the limb bolts usually changes its weight about two pounds. By increasing your draw weight just a few pounds at a time you’ll avoid injury.10-Jul-2018.
Can you shorten the draw on a compound bow?
Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.
Is 70 lb draw too much?
For example, a bow with a 70-pound peak weight and a 80% let-off should have a holding weight of around 14-pounds. Being able to hold a bow at full draw for 30 seconds is great, but if you’re shaking, struggling, and exhausted at the end of that time, then you’re not going to be able to make an ethical shot.05-Nov-2014.
Does changing draw weight change draw length?
Yes, changing to a longer draw length on a bow increases the draw weight. Reduce the draw weight with the oimb bolts if you can. I have done this in the past by using a longer bow string. FOr each inch longer, it added 3 or 4 pounds of weight if I rememebr right.25-Jan-2009.
How do I know if my bow draw is too long?
The bow arm should move toward the target when the shot is fired. If the bow arm drops or swings to the side, the draw length is probably too long. When this happens, the scapula has already pushed the bow arm out as far as it can extend before the arrow is released.
What draw weight do most hunters use?
Some shooters are capable of shooting 70, 80 or 90lbs, but most adult males shoot between 60 and 70lbs. Today’s bows are extremely efficient and 40lb compound bows are more than capable of harvesting many big game animals. For whitetail deer hunting anything above 40 lbs is fine.
How do I know my draw weight for a compound bow?
Just stand naturally. Have someone else help you, and measure from the tip of one middle finger to the other. Then simply divide that number by 2.5. The quotient is your approximate draw length (in inches) for your body size.
How do you increase your draw weight?
To adjust the draw weight on a compound bow, take it to an archery shop. A bow technician will evenly tighten the limb bolts and check the draw weight. One full turn of the limb bolts usually changes its weight about two pounds. By increasing your draw weight just a few pounds at a time you’ll avoid injury.
What draw weight do Olympic archers use?
Learn about all the equipment used for archery at the Tokyo Olympics. Bow: In Olympic archery, competitors use recurve bows that draw an average of around 48.5 pounds for the men and 33 pounds for the women. The bow may have a mechanical sight, but no optical enhancements.
What draw weight should I use?
Build, Bodyweight and Suggested Bow Draw Weights Type of Person/Build Weight (lbs) Compound Suggested Draw Weight (lbs) Large/Strong Child 100-130 25-35 Small/Slight Woman 100-130 25-35 Average Woman 130-160 30-40 Large/Strong Woman 160+ 45-55.
How do I find my perfect draw length?
To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.
Is longer draw length better?
Since the time always stays the same, we can conclude that the higher the distance (draw length), the greater the speed needed that means longer draw length leads to greater arrow speed and faster arrow.
What’s the average draw length?
If you have an average draw length of 27 to 29 inches, any modern compound bow matched with a good arrow and set to 60 pounds will work just fine on whitetails, mule deer, pronghorns, and the like with whatever broadhead style you prefer, so long as your shot placement is good.
How do you adjust the draw length on a PSE compound bow?
To change draw length on the ECS: Loosen the two 8-32 size 15 Torx® screws holding the module to the cam approximately 1-1/2 turns, move the module to the desired setting. The setting will be in the window marked “DL” move the module to the same setting on both top and bottom cams.
How do you adjust the draw length on a Browning compound bow?
To change to 30” draw simply remove the screws from the inner cam and move it to the set of holes marked “A” and reinstall the screws. For 28” draw, move the inner cam to the set of holes marked “C”. For 27” draw use the “D” setting. in the set of holes corresponding to the inner cam.
How long should my arrows be for a 28 draw?
If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches. However, your arrow length can be longer if you need to weaken the spine of your arrow. For safety reasons, your arrows shouldn’t be cut too short.
What is the best let off on a compound bow?
A standard compound bow will have let off of between 60% to 90%. These are just a rule of thumb though, and it does vary between different models. Some bows even have a feature of a changeable let-off percentage.
How hard is it to pull back a 40 pound bow?
The draw weight is basically, “How strong do I need to be in order to pull this thing back?” For a recurve bow, it’s measured by pulling back to 28 inches. So for a 40 lb bow, it means that it takes 40 lbs of force to pull back the string 28 inches for a recurve.
How far can you shoot a deer with a compound bow?
▶ All bowhunters have an effective range, or more appropriately put, a maximum shooting distance that lies within their comfort zone. For some, it’s 30 yards; for others, 60 yards. Compound bows have an effective range too–the distance at which the bow is capable of lethally delivering an arrow.