Table of Contents
Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.
Can you change draw length without bow press?
All draw length adjustments can be made without the use of a bow press. Draw length changes are made by simply moving the draw stop to the desired position, then rotating the modules accordingly. See draw length settings below. To change draw length, draw stops must be adjusted before the module.
What if my draw length is too long?
Many bowhunters shoot a draw length that is too long for them, which hurts shooting form and degrades accuracy. You hear this all the time–that a long draw overextends your bow arm and makes it harder to hold against the back wall and to maintain a consistent anchor point.
What if my draw length is too short?
If the draw length is too short, you will feel “bunched up” or uncomfortable because you are too compressed. In addition, the elbow will have a fairly big bend in it in order for you to get the string to your face.
How much does it cost to adjust draw length on a bow?
Changing the draw length totally depends on what bow it is. If it has rotating mods it should be cheap. If it’s a mod swap it depends on the brand Hoyt is about $25 bucks and Elite is about $50 bucks. If it’s cam specific then it’s not going to be cheap your probably lookin at 100-150 bucks.
Is 70 lb draw too much?
For example, a bow with a 70-pound peak weight and a 80% let-off should have a holding weight of around 14-pounds. Being able to hold a bow at full draw for 30 seconds is great, but if you’re shaking, struggling, and exhausted at the end of that time, then you’re not going to be able to make an ethical shot.
How long should my arrows be for a 28 draw?
If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches. However, your arrow length can be longer if you need to weaken the spine of your arrow. For safety reasons, your arrows shouldn’t be cut too short.
Does draw length affect draw weight?
Yes, changing to a longer draw length on a bow increases the draw weight. Reduce the draw weight with the oimb bolts if you can.
What is John Dudley’s draw length?
Overall draw length of 29.125″ has my Stan Shootoff perfect and a tad too long with my TRU Ball HT.
How do you adjust the draw length on a Genesis bow?
Customizing the Genesis Pro to your draw length is easy! The draw stop on the Genesis™ Pro is adjusted with an Allen wrench. Simply turn the Draw Stop counter-clockwise until it is completely removed; move it to the desired Draw Stop position; tighten until securely in place.
How do you adjust the draw length on a Browning compound bow?
To change to 30” draw simply remove the screws from the inner cam and move it to the set of holes marked “A” and reinstall the screws. For 28” draw, move the inner cam to the set of holes marked “C”. For 27” draw use the “D” setting. in the set of holes corresponding to the inner cam.
Is longer draw length better?
Since the time always stays the same, we can conclude that the higher the distance (draw length), the greater the speed needed that means longer draw length leads to greater arrow speed and faster arrow.
Can I make my draw length longer?
Draw length specific cam bows use specific cams to deliver different draw lengths. In this case, the archer has to purchase the proper cam (alpha/numerically marked) and install the cam to change the draw length. If not qualified to do such work, the archer should have this procedure done at their local pro shop.
How long should my draw length be?
Resist the temptation to make your draw length longer than it should be, as this will effect your accuracy. Your wingspan typically is the same as your height in inches; So your height in inches minus 15 and then divided by 2 will be your draw length, or at least a very good starting point.
How do I know if my bow draw length is too long?
The ideal draw length for you is the one that allows you to anchor in a comfortable position, with your bow arm elbow unlocked (slightly bent) and your release arm elbow and forearm pointing straight away from the target. If the release arm elbow points left or right, your draw length is too long or too short.
How long should my arrows be for a 29 inch draw?
it depends on the arrows you choose, you need at least 1/4″ of arrow overhang on the rest. so you can probably shoot an arrow that’s about 28 1/4 for rests that are set up normally. and go all the way up to full length 36″ arrows for indoor. i would suggest 1″ of overhang on your rest.
Does a longer draw length affect arrow speed?
The longer your draw length, the longer your bow’s powerstroke will be – and the faster your bow will shoot. As a general rule, 1″ of draw length is worth about 10 fps of arrow velocity.
How much does it cost to get a compound bow adjusted?
A typical bow tuning service costs $40 to $70 and takes about an hour.
How do you change the draw length on a prime bow?
Pushing the limb stops inward will result in decreased let-off and shorter draw length, while moving the limb stops outward increases let-off and draw length. To adjust them, use a 9/64” Allen wrench, loosen 8-32” cap screw one full turn, and slide both the upper and lower limb stops equal amounts.
