Table of Contents
All you need are a few hours, a helper and the right tools and toilet parts for the job. Before you begin learning how to install a toilet, choose your new toilet, and if you aren’t replacing an existing toilet, make sure you have plumbing ready for the new installation.
Do you need a plumber to install a toilet?
Yes. A toilet is part of your plumbing system, and needs to be installed by a licensed and qualified plumber. If you are undertaking a complete bathroom renovation and replacing your toilet as part of this job, your bathroom renovator needs to be appropriately licensed and use a plumber for this job.
What is required to install a toilet?
Required Materials for this how to change a toilet Project Brass toilet bolts. Caulk. Flexible water supply. Plastic shims. Toilet flange. Wax ring.
Can you put a toilet anywhere in your house?
On a serious note, it is absolutely possible to install a toilet, even a bathroom as a matter of fact, anywhere in your house. In the past, many homeowners have had the idea of their dream bathroom crushed because the location was simply too far away from the main drain.
Can anyone replace a toilet?
So to answer the question, essentially yes you can replace your own toilet bowl and cistern. A toilet system has many parts and components that work together. Closet Flange, closet elbow, close bolts, different flushing mechanisms and wax ring are just some terms and materials that you should become familiar with.
Is replacing a toilet easy?
Replacing a toilet is a major project, but it is not as difficult as might be imagined. The hardest tasks usually are selecting a new toilet and removing the old one. Choose a new toilet carefully. Ask the dealer whether existing plumbing will have to be modified, which is a job for a licensed plumber.
What is the labor cost to install a toilet?
At that price range and duration, the cost of labor alone for a typical toilet installation project could be as little as $90 or as much as $600 at the extreme end, though the majority fall within the $122 to $228 range.
How long does it take a plumber to install a toilet?
Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don’t have a lot of DIY experience, you might want to add an hour or two to that timeframe.
How long after installation can a toilet be used?
Once the toilet is installed, you should wait at least 6 to 12 hours to ensure that all the work won’t go to waste. No caulk or grout used – In this case, you don’t have to wait as there is nothing that needs to dry.
Do you have to replace the wax ring when you remove a toilet?
Whenever you remove a toilet for any reason, you will need to replace the wax ring seal between the toilet and the toilet flange (sometimes called a closet flange) attached to the floor. A wax seal is used because it resists mold and bacteria and retains its sealing ability after years of use.
Can you poop in a macerator toilet?
The simple answer is that yes you can poop in a Saniflo toilet. As with normal toilet systems you can put any organic waste into the toilet bowl and use the flush mechanism to remove it—which includes toilet paper—although like a standard toilet too much toilet paper can lead to blockages occurring.
Can a toilet be next to a kitchen?
As long as it has a door, AND a wash-basin between the pan and the door, you can have the toilet leading from the kitchen. There should also be means of ventilation, at the very least a window with trickle vent and an opening window.
Is it OK to have a toilet off a kitchen?
Location. Building regulations used to state that downstairs toilets could not open into a kitchen or living room. However, these have relaxed, and this is now allowed as long as the WC includes a sink for handwashing. Even so, a downstairs bathroom should open into a hallway if possible.
Can I remove my own toilet?
If you need to replace an old toilet, repair a toilet flange or install new bathroom flooring, you’ll need to know how to remove a toilet. Removing a toilet is a relatively simple project that most DIYers can tackle either alone or with a helper.
Is it safe to leave a toilet off overnight?
Yes, absolutely, fumes can be harmful when replacing a toilet, but they can be kept at a minimum and shouldn’t pose a health risk if you work reasonably quickly and keep the drainpipe covered between removal and installation.
Why is my toilet leaking around the base?
Why is the toilet is leaking from the base? The leak is usually caused when the seal under the toilet fails. Wait until a new puddle appears on the floor, then check to make sure the water is seeping out from under the toilet and not coming from a loose supply tube, faulty shutoff valve, cracked tank or sweaty bowl.
How often should you replace your toilets?
How Long Do Toilets Last? Typically, toilets need replacement after 25 years of use so this can be considered the average toilet lifespan.
Should you tile under a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first. The floor will be sealed a lot better with the tiles being laid under the toilet.
What is the last step when installing a toilet?
Position the seat assembly over the bowl, then insert the plastic bolts through the seat back and the bowl’s seat holes; tighten the nuts by hand. Turn on the main supply line, open the stop valve, and allow the tank to fill. Flush six times. The final step to installing a toilet is to check for leaks.
