Table of Contents
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 27 (the amount of cubic feet in a yard). The final figure will be the estimated amount of cubic yards required.
How much dirt will 4 yards cover?
A normal yard of soil would be in the 2,200-2,400 pound range. Now that you know some weights you still have the most asked question when ordering material… How Much Does A Yard Cover? A cubic yard of material can be spread to cover 100 square feet (10×10 foot area) at 3 inches of depth.
How do I calculate yards of dirt?
Cubic yards are used to measure the materials we provide, such as topsoil, sand, pit run, and gravel. We’ll need to know how many cubic square yards of the product you will require for your project. This is the basic formula: length [ft] x width [ft] x depth [ft] = cubic sq.
How much soil do I need for 4×4 raised bed?
How Many Bags of Soil Do You Need for a 4 x 4 raised garden bed? For a 4×4 raised garden bed, you will need 7 bags of soil (1.5 cubic feet per bag) or 10.72 cubic feet of soil. This is assuming your raised garden bed is 8 inches high and the bags of soil you are buying contains 1.5 cubic feet of soil per bag.
How do I figure cubic yards?
Here’s how to do this: Convert the dimension in inches to yards (6 inches ÷ 36 inches = 0.167 yards) Convert the dimensions in feet to yards (12 feet ÷ 3 = 4 yards) Multiply the three dimensions together to find the number of cubic yards (0.167 x 4 x 4 = 2.67 cubic yards).
How much dirt does it take to raise 1 acre of 1 foot?
So, if you dig 1 foot deep over an acre, you get 43,560 cubic feet of dirt. If you dig 5 feet deep, then you have 5 times this amount of dirt. If you dig 5 feet of dirt out of 50 acres, then you have 50 times as much dirt as if you did that over 1 acre.
What is a yard of dirt?
For example, if you dig up a flower bed that is 9 feet long, 3 feet wide and 12 inches deep, you will have one cubic yard of dirt. 3 feet equals 1 yard, so 9 feet equals 3 total yards in length. The width of 3 feet equals 1 yard.
How much dirt is needed for a raised bed?
How much soil? For a 4×8–foot raised bed with a 10” height, about 1 cubic yard of soil is needed. For a 4×8-foot raised bed with a 6” height, using Mel’s Mix: about 5 cubic feet each of compost, peat moss, and vermiculite is needed.
How many yards of dirt are in a truckload?
How many yards of dirt in a dump truck:- a standard sized dump truck is always recommended for your project. It can carry about 10 to 14 cubic yards of dirt per truckload. Thus, a dump truck can have capacity to hold 10 to 14 cubic yard of dirt per truckload.
How many yards of dirt are in a dump truck?
Dump trucks can usually carry about 10 to 14 cubic yards of dirt. To understand what a cubic yard looks like, it’s easiest to think of one as a block of material around 3 feet in length, height, and width.
How many bags of soil do I need for 12 cubic feet?
If you are buying soil that is sold by the quart then first change cubic feet to quarts by multiplying it by 25.75. Then divide it by the number of quarts in the bag. In this example, the reader needs 12 cubic feet or 309 quarts. If he is buying 8 quart bags then he will need 39 bags (309/8 = 38.6).
How much area does a cubic yard cover?
1 Cubic Yard Covers Example: One cubic yard spread at a depth of 3 inches covers 108 sq feet.
How much rock do I need to cover an area?
How much landscaping rock do I need? Material Suggested Depth Coverage Area per 1 ton 3”-8” rock 3”-8” 60 square feet 1”-3” rock 1”-3” 80 square feet 3/4”-1” screened gravel 2” 100 square feet 5/8”-1/2” screened gravel 2” 120 square feet.
What is the calculation for cubic feet?
If you prefer to or have to calculate cubic footage by hand, you can find cubic feet by multiplying three linear measurements—length, width, and height—in feet. For instance, to find the volume of a cube, you would calculate the following: length x width x height.
How do you calculate moving dirt?
Measure the length, width and depth of the area you want to fill with dirt. Calculate the volume of dirt needed to fill the area you measured by multiplying length (120 inches) by width (60 inches) by depth (30 inches). Convert cubic inches to cubic yards by dividing by 46,656 cubic inches.
How many yards of dirt does it take to cover an acre?
So an acre is 4840 square yards. If you cover it 1 yard deep, that’s 4840 cubic yards.
How many cubic yards is one acre?
Acre-foot to Cubic Yard Conversion Table Acre-foot [ac*ft] Cubic Yard [yd^3] 1 ac*ft 1613.3333333333 yd^3 2 ac*ft 3226.6666666667 yd^3 3 ac*ft 4840 yd^3 5 ac*ft 8066.6666666667 yd^3.
How much is a yard of dirt cost near me?
Cost to Deliver Landscaping Fill Material Cost per Cubic Yard Delivery Topsoil $12 – $55 $15 – $150 Dirt $5 – $15 $150 for 10 – 13 cubic yards Sand $15 – $20 $50 – $150 Mulch $15 – $65 $150 for 10 – 13 cubic yards.
How many wheelbarrow loads are in a cubic yard?
Depending upon your wheelbarrow size (i.e. 2 or 3 cubic feet per wheelbarrow load), it will take 9 to 14 full loads to equal 1 cubic yard.
