Table of Contents
The project drawings and specifications are an integral part of the contract documents and are inseparable. The drawings reflect what the project specifications are unlikely to cover; and the project specifications indicate what the drawings are unlikely to portray.
Are drawings part of the contract?
Drawings—The part of the Contract that graphically shows the scope, extent, and character of the Work to be performed by Contractor.
Are working drawing legal documents?
Working drawings are the graphic communication between the designer and the contractor. Further, because the drawings are a part of the contract documents, they are legal documents that impose various obligations on the parties to the contract-that is, the owner and the contractors.
What is included in contract documents?
What are the Basic Contract Documents ? Contract Agreement. Scope of Work Definition. General Conditions. Special Conditions. Bill of Quantities. Work Schedule. Drawings. Technical Specifications.
What is the purpose of drawings in the contract documents?
This means they have legal significance and form part of the agreement between the employer and the contractor. The main purpose of construction drawings is to provide a graphic representation of what is to be built.
What are the contract drawings?
The contract drawings include the architectural drawings, the structural/geotechnical engineering drawings, and the building services engineering drawings. These drawings provide information regarding the arrangement of spaces, structural components, electrical, mechanical and plumbing installations etc.
Do shop drawings supersede contract drawings?
The fabricator’s drawings are then given to “the shop” for use in making the component – thus the name “shop drawing.” As one court stated, “shop drawings are the final word as to how the work should proceed on the job, and supersede the architectural plans.”Jan 6, 2020.
What is included in working drawings?
Building plans Building plans are called the working drawings for a building because they’re what the various tradespeople use to carry out the work. Often the term ‘building plans’ is simply shortened to ‘plans’. Site plan. Floor plan. Elevation. Section. Detail.
What type of drawing is used for working drawings?
They may include architectural drawings, structural drawings, civil drawings, mechanical drawings, electrical drawings, and so on. Traditionally, working drawings consist of two-dimensional orthogonal projections of the building or component they are describing, such as plans, sections and elevations.
What information is contained in working drawings?
The working drawings usually contain information rela- tive to the design, location, dimensions, and construction of the project, while the project manual is a written supplement to the drawings and includes information pertaining to ma- terials and workmanship, as well as information about the bidding process.
What are the 7 elements of a contract?
7 Essential Elements Of A Contract: Everything You Need to Know Contract Basics. Contract Classification. Offer. Acceptance. Meeting of the Minds. Consideration. Capacity. Legality.
What are the six major parts of contract documents?
6 Essential Elements of a Contract Offer. Acceptance. Awareness. Consideration. Capacity. Legality.
What is the difference between as built drawing and shop drawing?
The as-built drawings are made after the completion of the project. And the shop drawings are made before a construction project starts. As-built drawings can be made for the whole building as well as for specific components. But the shop drawings are only made for the different components of a building.
What is the minimum data should be included in the working drawing?
This document may contain information of a sensitive nature and shall not be given to persons other than those who are currently involved in the project,or who will become involved during the lifecycle. 6.
Do specifications govern over drawings?
In order to resolve discrepancies between specifications and drawings, the contract included the following: General requirements, which stated “in case of differences between project specifications and the accompanying drawings, the specifications will govern.”Aug 28, 2017.
What are the 3 types of contracts?
Generally you’ll come across one of three types of contract on a project: fixed price, cost-reimbursable (also called costs-plus) or time and materials.
What are the 6 types of construction drawings?
What Are the Six Types of Construction Drawings? Plans. Interior and exterior elevations. Building and wall sections. Interior and exterior details. Schedules and room finishes. Framing and utility plans.
What is included in structural drawings?
Structural drawing A structural drawing, a type of engineering drawing, is a plan or set of plans and details for how a building or other structure will be built. The structural drawings set has different subsets: General Notes, Plans, Elevations, Sections, and Details.
Does the architect need to approve the sub contractor’s shop drawings?
The architect will rarely have any obligation to approve a sub-contractor’s shop drawings unless the sub-contractor has a design obligation or the contract documents expressly require the architect to approve such drawings.
Do architects approve drawings?
‘Architects don’t approve drawings; they comment on them, that’s the distinction,’ Crawford said.
What is the difference between IFC and AFC drawings?
A Construction team must use only an AFC marked or stamped drawings and documents for the construction works and activities. Issued for Construction (IFC) means that the document or drawing which are categorised as the review, and Issued for Construction.
What is not included in architecture plans?
What is not included in the plans: Architectural or Engineering Stamp. Site Plan. Mechanical Drawings (location of heating and air equipment and duct work) Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) Framing layouts with beam sizes and locations. Energy calculations.
What are two basic categories of working drawings?
There are two types of drawings. The first is a drawing done without instruments, known as a sketch. The second is a drawing done with instruments, known as a final drawing.
What are the three main parts of a set of working drawings?
Three main sets of production drawings include the following: Detail of each non-standard part on a drawing sheet, usually one part per sheet. Assembly drawing showing all parts on one sheet. A Bill of materials (BOM), essentially of each part.
What are the 4 requirements for a valid contract?
The complaining party must prove four elements to show that a contract existed. These elements are offer, consideration, acceptance, and mutuality.
What are the 4 elements of a valid contract?
The basic elements required for the agreement to be a legally enforceable contract are: mutual assent, expressed by a valid offer and acceptance; adequate consideration; capacity; and legality.
What makes contract valid?
The Civil Code defines a contract as “a meeting of minds between two persons whereby one binds himself, with respect to the other, to give something or to render some service.” For there to be a valid contract, these three elements must be present: consent, object, and cause.
