Table of Contents
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model.
Are all toilet holes the same size?
Not every toilet requires the same size hole, and clearances also vary, but there is a standard size and placement that works for most models.
Are toilet tank bolts standard?
Most toilets use standard sized toilet tank bolts. If the bolts that attach the tank assembly to the bowl are not standard sized, though, you will have to use alternative bolts. You can do this by taking the old bolts to the local hardware store with you.
Are toilet bolt holes universal?
Toilets are made to fit on standard flanges. Unless your husband has ripped out the standard plumbing and done something funny, it will work fine.
Will an elongated toilet replace a round toilet?
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.
How do I know what size toilet I need?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
Will any toilet tank fit?
Will any tank fit any toilet? Any tank should fit your bowl but you may have to adjust where it hangs on the wall and you may have to cut the supply line to the toilet bowl itself.
How tight should toilet tank bolts be?
Bolts Don’t Have to Be Extremely Tight The tank-to-bowl bolts are merely there to ensure the rubber seal between the tank and bowl is snug and leakproof. Tank bolts do not need to be tightened to an extremely snug position.
Can you just buy a toilet tank?
Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you’re done.
Can you replace toilet bolts without removing toilet?
You can’t replace a closet bolt without removing the bowl. Pull the bowl, and next time pick up brass bolts.
What size wrench Do I need to remove a toilet?
Metal seat bolts: The deep-well socket option If the bolts are metal, you might be able to unscrew the nuts with a pliers, but the best tool for this job is a socket wrench equipped with a deep-well socket (Photo 1). Most toilet seats require a 1/2-in. socket.
Which toilet is better round or elongated?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
How can I tell if my toilet is round or elongated?
To measure the length of the bowl, locate the two mounting bolts at the seat hinge. From there, measure to the very front of the toilet fixture in a straight line. That straight line measurement will be about 16-1/2 inches if the bowl is round, and 18-1/12 inches if your bowl is elongated.
How far should toilet tank be from wall?
The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.
What is standard toilet height?
Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. In recent years toilet bowl height has increased to assist people with sitting and standing up, for the benefit of taller people, and those with physical handicaps and/or the elderly.
How much should it cost to have a toilet installed?
Toilet installation costs around $372, with most people paying between $224 and $531 for a full toilet replacement, depending on the type of toilet and the difficulty of the job. This includes the cost of the toilet, labor and equipment needed for the installation.
Can you mix and match toilet bowl and tank?
There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.
How much does it cost to replace a toilet tank?
A replacement tank will range from $50 to $100, not including the labor to install it. A professional plumber can put in a new tank in 1-2 hours for a total cost of $45 to $300. Total project price will depend on minimum charges as well as whether the internal tank parts also require replacement.
How many Litres is a toilet tank?
Single-flush toilets have just a single flush volume option. Some models flush with as little as 0.8 gallons (3.0 litres), and some flush with as much as 1.6 gallons (6.0 litres). Models certified to WaterSense flush with no more than 1.28 gallons (4.8 litres).
