Table of Contents
Should my drawer pulls match my faucet?
Does cabinet hardware have to match your faucet? No. But, traditionally kitchens and bathrooms will match hardware finishes to the faucet to tie the finishes in the room together. Matching cabinet hardware to your faucet creates a cohesive look.
What is the most common type of drawer pull?
Bar Pulls – These tend to be the most common type of pull we see. They work well on most styles of cabinet door, from shaker to more contemporary, because there are almost endless varieties, sizes, and styles available.
What is a craftsman style kitchen?
Craftsman-style kitchens are one of the most recognizable styles with rich wood finishes, paneling, and built-in storage. They often have an organic theme, with the use of natural materials and a calming, earthy color scheme. The appeal for many buyers is the homey atmosphere the kitchen creates within the house.
Should drawers have knobs or pulls?
One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull. It is much more comfortable to open a drawer using a pull.
Does bathroom hardware have to match?
Don’t mix and match your hardware and/or finishes! If you have the ability, get your hardware to coordinate, since having silver, white and gold or black makes your bathroom look disjointed. The key to proper design is to universally communicate a message, so hardware and fixtures are key.
Do kitchen and bathroom hardware have to match?
The cabinet fixtures and hardware in a bathroom do not have to match the faucets. Matching all the hardware to each other is the safest way to make sure the fixtures look cohesive. It’s amazing how something as small as faucets and hardware can alter your bathroom’s entire look.
What size cup pulls for drawers?
Determine Size While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
What are standard drawer pull sizes?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another).
Should cabinet and drawer pulls be the same size?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). If you choose to use a smaller size throughout, we highly recommend using two pulls on wide drawers.
Are Shaker cabinets Craftsman style?
And of course, craftsman-style kitchens were practically born for Shaker cabinets. The less is more approach of craftsman design, along with its focus on using wood and other natural materials, make Shaker cabinets the perfect fit for craftsman kitchens.
What makes a house a craftsman style house?
The common features of the Craftsman style include low-pitched gable (triangular) roofs, overhanging eaves with exposed rafters and beams, heavy, tapered columns, patterned window panes and a covered front porch.
Is Mission style the same as Craftsman?
A timeless souvenir of the American Arts-and-Crafts movement, the craftsman design style (also called Shaker or mission style) is a thoughtful exercise in craftsmanship and quality.
Can you mix knobs and pulls?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
Do you put pulls on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Are Zinc cabinet pulls good?
Zinc is a good metal for cupboard pulls. Zinc alloy is a safe material for manufacturing cabinet hardware. Furniture handles, which are produced using zinc alloy material, are very durable and long-lasting. It is a material that is resistant to bad weather, moisture, and water due to its zinc composition.
Is it OK to mix fixture finishes in bathroom?
One of the questions our design consultants get the most when helping homeowners plan a bathroom remodel is, “Can I mix metal finishes, or do I have to stick to one?” The short answer is: yes, you can absolutely mix metal finishes in your bathroom!Aug 1, 2019.
What hardware do you need in a bathroom?
Bathroom fixtures are all about the faucets for sinks, showers and tubs, towel racks, rings and bars, toilet paper holders, soap dispensers and more. A few tips can help you make these decisions easier and faster.
Is it OK to mix hardware finishes?
Mixing metal finishes can add dimension and visual interest to a room. Instead of a monochromatic, one-note space, you create intrigue and the illusion of texture. When you mix metals, you can blend styles, making a room look more or less modern depending on your personal taste.
Do door knobs have to match faucets?
Bathroom faucets do not need to match doorknobs. If the sink faucet has a unique design element, you can highlight it with an accented metal finish. You would not want to match the doorknob to the faucet and detract attention from the sink.
Does all hardware have to match house?
You don’t have to choose one metal and use that throughout your house. You can mix and match,” says Renee. “You can do a polished nickel light and faucet with unlacquered brass cabinet hardware. You want it to blend and be careful of clashing, but you can definitely mix metals.”Apr 5, 2016.
Does all hardware need to match?
Most designers agree that hardware should match within the rooms they’re found in a home. This is suggested because it’s easier to create compelling combinations with those guidelines.
Can you mix cabinet pull sizes?
There’s no “rule”, it’s a matter of looking at as many kitchens as possible and figuring out the look you prefer. I also used a variety of sized pulls on drawers of different widths, and used Restoration Hardware.
What size cabinet pulls for 36 inch cabinets?
Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
Where should Pulls be placed on cabinets?
For pulls (having two screws) on upper cabinets, the pull should be centered horizontally on the door stile and the bottom hole should be placed 2-1/2” up from the bottom of the door. For lower cabinets the upper hole should be placed vertically, 2-1/2” down from the top of the door.
