Table of Contents
Are Mora carving knives any good?
On the whole Mora offer very good quality for a reasonable price. I wanted a straight edge carving knife so bought this 122, and unfortunately the quality is awful. It came reasonably sharp but the laminated blade is soft and on mine bent which meant keeping a nice scandi ground edge very difficult.
Where are BeaverCraft tools made?
Here at BeaverCraft, we make the knives for both wood carving professionals and beginner whittling pioneers. All of the tools from our store are made in Ukraine, Eastern Europe, and are promising good quality – the knives you buy come with a lifetime guarantee by the manufacturer.
Where is BeaverCraft located?
Country origin of BeaverCraft is Ukraine. Lovely country with beautiful landscapes.
Where is BeaverCraft from?
About us – BeaverCraft – Wood carving tools from Ukraine. To start with, we’ve been looking for high-quality woodcarving tools for quite some time.
What is a sloyd knife used for?
Much like traditionally-designed Swedish tools, this carving knife is a durable, well-made tool, ideal for spoon carving, whittling, marking, and general woodworking and handicrafts. Its versatility allows you to use it for a wide range of wood carving projects from detail work to roughing.
How do I start whittling?
The easiest way to start whittling wood is to find a stick or piece of wood and start slicing away. If you want to start with pre-cut wood, buy blocks and stick to softwoods. The most common whittling wood is basswood. It is soft and you have minimal grain to deal with.
How do you carve a kuksa?
Take a log of fresh wood and chop it down the centre with an axe. Take one half and carve the chopped surface smooth and flat with your knife. Draw around a cup or round object onto the flat surface at one end. Carve around one side of the circle.
What is a sloyd blade?
Sloyd is a word derived from the Swedish word Slöjd meaning handiwork or crafts. Therefore a Slöjd Knife could be considered a knife made for handiwork or crafts.
Where did the sloyd method originate?
Sloyd (Swedish Slöjd), also known as Educational sloyd, is a system of handicraft-based education started by Uno Cygnaeus in Finland in 1865.
What is a puukko knife?
A puukko (Finnish pronunciation: [ˈpuːkːo]) is a small traditional Finnish general purpose belt knife with a single curved cutting edge, solid hidden tang and, usually, a flat spine.
What tools are needed to start whittling?
Whittling kits often consist of three knives, one of which is the most basic whittling knife, and another can be a detail knife with a smaller blade and finer point. There can also be a bigger knife for doing big rough cuts to prepare your wood for work. It can consist of a hook knife for making spoons and bowls.
What is the difference between whittling and carving?
Occasionally the terms “whittling” and “carving” are used interchangeably, but they are different arts. Carving employs the use of chisels, gouges, with or without a mallet, and often powered equipment such as lathes. Whittling, however, involves only the use of a knife.
What is the easiest wood to carve?
Basswood is one of the easiest types of wood to carve with, and perhaps you’re a beginner, you can start with the kind of this wood. The wood is soft and best for carving, making it suitable for almost all whittling projects.
What is needed for chip carving?
Fortunately, only a few tools are required to get started on a chip carving project. You need only chip carving knives, sharpening equipment, and a few small pieces of wood. In this article, we give you step-by-step instructions for applying the pattern to the wood, making first cuts, choosing knives, and finishing.
What kind of wood is used for chip carving?
In America it is mostly used with basswood, butternut, pine, or mahogany. Chip carving knives can also be used for whittling, cabinet making, and general workbench purposes.
How do you carve intricate designs in wood?
Relief Carving Step 1 – Draw the design on paper the same size as the wood. Step 2 – Sketch the design on the wood. Step 3 – Start carving the main lines and the shapes. Step 4 – Resketch details that were removed during the rough carving and proceed to carve the details in with a fine or medium chisel.
What type of wood is used for kuksa?
Birch is an ideal kuksa wood and is historically the most common wood used for this purpose. The ultimate kuksa wood is a birch burl that has the same curvature as the cup you are going to carve, but other woods can be used as well.
Can you drink coffee in a kuksa?
I recommend to use it only for coffee or tea, but not both. Never leave your cup standing around if it’s not empty. And don’t put milk in it. After use, rinse the Kuksa only with water.
Is Basswood good for cups?
Basswood is likely to be soft as it presents easy slicing when getting it into shape. However, this makes it a less viable option for mugs and cups unless you want to create fine pieces for showcasing. You shouldn’t necessarily opt for the hardest wood to craft the best wooden mug or cup right away.
What is the meaning of sloyd?
: a system of manual training developed from a Swedish system and designed for training in the use of tools and materials but emphasizing training in wood carving as a means to this end.
What does the word Slojd mean?
Slojd is a Swedish term for a training system to learn how to use woodcarving and joining tools. An example of slojd is a class in Sweden to learn how to make wooden bowls. noun.
