QA

Are Mazda Factory Breaks Ceramic

What brand of brake pads does Mazda use?

Akebono Brake Products: Trusted by Original Equipment Manufacturers Worldwide. Akebono’s OEM customers include: General Motors, Ford Motor Company, Chrysler, Honda, Toyota, Mitsubishi Motors, Mazda, Nissan, Subaru and Isuzu.

Are OEM brakes ceramic?

A: OEM stands for “original equipment manufacturer,” so OEM brake pads are the same as those that came with the vehicle. The friction material on the brake pads may be organic, semi-metallic or ceramic. Brand-name aftermarket pads are just as good — and sometimes better — than OEM.

Are ceramic brakes better than OEM?

Both ceramic and semi-metallic OEM brake pads offer certain advantages over other types. Because they are soft, ceramic pads do not damage rotors and provide smooth, even friction during braking. Ceramic pads are also clean and produce less dust as they wear down.

How good are Akebono brake pads?

5.0 out of 5 stars Great pads, excellent stopping power. These brake pads provide much more stopping power than the OEM Honda pads, and are about half the price. After a proper break-in, my car now stops better than it ever has before.

Are OEM brakes worth it?

OEM brake pads are good for a few reasons: Most of the time, the brake system in your car was designed for the OEM pads. OEM pads are quiet, minimize dust, and perform well. OEM pads are designed for normal daily driving.

Are OEM brakes better than aftermarket?

OEM brake pads are usually more expensive, exclusively sold by dealerships, but are outperformed by aftermarket brake pads, in every way. OEM brake pads are good for all round usage. However, aftermarket brake pads will stop even better, last longer, and in most cases, cost much less than OEM brake pads.

Why are OEM brake pads so expensive?

Quality pays for itself the first time around, just buy the OEM stuff from irontoad. It costs more because its engineered to last you.

What brakes are better ceramic or metallic?

Ceramic brake pads typically last longer than semi-metallic brake pads, and through their lifespan, provide better noise control and less wear-and-tear to rotors, without sacrificing braking performance.

How do I know what kind of brake pads I have?

On many vehicles, you can see the brake pad through the holes in the wheel. To check the life of the brake pad, you need to determine its thickness. You might need a flashlight to get a good look at the brake pad. If the pads look thin, less than 1/4″, it might be time to get them replaced.

How can you tell the difference between semi-metallic and ceramic brake pads?

They were developed after semi-metallic pads in an attempt to reduce noise, heat, and brake dust. The difference between ceramic and metallic brake pads is that ceramic pads are quieter and cleaner in comparison to organic and semi-metallic pads, less abrasive on rotors, and often last longer than others.

What kind of brakes does my car have?

Look through one of the holes at the top of the front wheel. If your car has front disc brakes (most do), you will see the brake rotor, a shiny smooth surface an inch or two behind the wheel. If it does not have front disc brakes you will see a round rusted-looking brake drum.

Are ceramic brakes worth the money?

They’re quieter than organic or metallic pads and produce less dust. They also last significantly longer, can tolerate a greater range of temperatures, and fade less as they heat up, TireRack reports. As for full carbon-ceramic brakes, they also offer little fade and long service lives, Autotrader reports.

How long do ceramic brakes last?

You can expect a semi metallic pad to last for about 50,000 miles. Ceramic pad car brake systems are found on luxury cars and are meant for comfortable braking. Carbon ceramic brakes aren’t meant for use in high-performance conditions but have a long lifespan of about 70,000 miles.

What are the pros and cons of ceramic brake pads?

Ceramic brake pads cause much less noise in comparison to metallic brake pads because they are not as abrasive. This takes a lot of stress off the brake discs, which means they will last longer too. Most importantly, ceramic brake pads are more resistant to heat which also preserves the life of your brakes too.

Which Akebono Brake pads are best?

The Performance Ultra-Premium Ceramic Brake Pads are positioned as the most advanced Akebono pads you can possibly buy. They have it all. Low noise, little dust production, best in class stopping power, and on top of that, you can use them in extreme applications.

How long does Akebono brakes last?

Stock pads are fanstatic and have 125K miles on them and look like they will easily go another 100K miles. I know several folks approaching 250K miles on the original pads. And they don’t have dust, don’t fade and have very good response.

Where are Akebono Brake pads made?

Akebono operates R&D technical centers in the United States, Japan and France, and manufactures brake friction materials and components in 30 wholly owned or affiliated facilities worldwide. This includes two production facilities in Kentucky, one in Tennessee and one in South Carolina.

How long should OEM brake pads last?

Brake pads can last anywhere between 30,000 and 70,000 miles. The variance depends on your driving style and typical driving conditions. Using data provided by Federal Highway Administration statistics on how many miles people drive annually, typical brake pads will last between 3 and 7 years.

Are OEM rotors better?

For example, some aftermarket rotors are as much as 15% lighter than OEM rotors. OEM rotors, on the other hand, cost slightly more because they’re better built and with better quality materials. But, you’ll get better braking performance, without any worry about problems caused by cheap components.

Do OEM rotors matter?

It’s time to ask yourself whether to get an OEM or aftermarket replacement rotor. You may be wondering if it even matters. The answer is yes. There’s a huge difference between OEM and aftermarket rotors in term of quality, performance, and more.