Table of Contents
It is much more comfortable to open a drawer using a pull. This allows the whole hand to grab instead of only your fingertips. This is extremely helpful since drawers can get very heavy with all of your pots, pans, dishes, etc. You can also stick to only knobs or only pulls.
Do knobs look good on drawers?
Knobs can be the more comfortable option for cabinet doors because your hand rotates naturally as you open them. Pulls are a great option for drawers because your hand doesn’t have to rotate, and you can use more force underneath the whole pull.
Are knobs or pulls more expensive?
Cabinet knobs – are more traditional and typically less expensive than pulls. You only need one cabinet knob for cabinet doors and may need two knobs with larger, heavier cabinet drawers. Cabinet knobs being smaller than pulls, will draw less attention which can be very appealing.
Can you replace drawer pulls with knobs?
Switching out the pulls, handles, or knobs of your drawers is one of the easiest home upgrades in the book — you simply have to unscrew the old ones and replace them — and the impact is immediate. This quick fix also works wonderfully to visually unify any mismatched furniture.
What is the difference between a knob and a pull?
What is the difference between a knob and a pull? A knob requires one fastener or screw. A pull requires two fasteners or screws.
Are knobs or pulls better?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
Where do pulls go on cabinets?
Pulls should be placed horizontally on drawers. For small drawers (less than 24” wide) center the knobs or pulls in both directions. Just like on larger drawers, pulls should be placed horizontally. Knobs and pulls can also be placed centered at the very top of the drawer panel, where the drawer rail begins.
What kitchen hardware is most popular?
Top 16 Most Popular Kitchen Cabinet Knobs and Pulls Alison Value Oversized Antique Brass Knob. 3-Inch Bit Pull (Oil Rubbed Bronze) Alison Value Center to Center Bar Pull. Somerset Melon Pull 7-inch (Brushed Satin Nickel Finish) Davenport Knob (Satin Nickel Finish) Square Twist T Handle Knob (Steel).
What is the rule of thumb for cabinet hardware?
An oversized cabinet door or drawer needs a large piece of hardware for proper functionality. A good rule of thumb for traditional or transitional style pulls is that they should be about one-third of the length of the cabinet drawer. Drawers larger than eighteen inches wide may require more than one pull or knob.
Is Top Knobs a good brand?
Founded in 1994, Top Knobs is the number one manufacturer of decorative hardware for the professional market. In fact, the company bills itself as the, “#1 leader and #1 trend-setter for the professional decorative hardware industry.”Aug 17, 2015.
Can I replace cabinet knobs with handles?
Replacing knobs with handles is a quick way to update a kitchen while making it more comfortable and convenient to use. Low end cabinet handles can be priced as low as $1 each. High end handles range between $15 to $20 a piece.
Can you replace knobs with handles?
Most older kitchen cabinets have knobs (one hole) to open them. Replacing these knobs with modern handles is a great way to change the appearance of your cabinets for next to nothing. The only issue is you now have a hole from the old knob in the cabinet. You can buy cabinet hardware handles in bulk and save money.
Can you replace kitchen cabinet handles?
Changing your kitchen cabinet knobs or handles can be a quick and easy way to give your kitchen a quick refresh, but if you are changing knobs for handles or handles for knobs, it may not be so straight-forward. Holes for the new handles can be drilled, and then your handles can be fitted as usual.
Where should kitchen knobs and pulls be used?
The first route is to put knobs on all the upper cabinets and pulls on all the lower cabinets, creating a harmonious visual appearance. The second option is to put knobs on all the doors and pulls on all the drawers, prioritizing function.
Can you use both knobs and pulls on kitchen cabinets?
Can I mix and match knobs and pulls? Of course! When doing so, most people install knobs on doors and pulls on drawer fronts. Mixing knobs and pulls is a great way to add another layer of detail to your kitchen.
How do I choose cabinet pulls?
How-To: Choose Cabinet Hardware Types of Cabinet Hardware. Knobs have smaller profiles than handles, are less expensive, and can be used for both drawers and cabinets. Pulls are larger than knobs, make more of a statement, and tend to be easier to grip. Select a Style. Choose a Finish. Don’t Be Afraid to Mix Metals.
Do cabinets look better with hardware?
Hardware presents an ideal opportunity to show off your style. With so many designs and finishes to choose from, cabinet hardware is an ideal way to add a little signature style to your kitchen. It worked for The Everygirl co-founder Danielle Moss in her white kitchen featuring sleek, high-contrast black hardware.
Do you put pulls on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Do knobs go on drawers or cabinets?
Knobs can be placed on both cabinetry doors + drawers. Mounted on the door stile, cabinetry knobs are placed on the opposite side of the door hinge + typically 2-½” to 3” from the bottom corner of the door for upper cabinets. While on base cabinets knobs are usually placed 2-½” to 3” from the upper corner of the door.
